- 09 10月, 2021 34 次提交
-
-
由 Simon Glass 提交于
Use a simple return to drop the unwanted code. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This file has a lot of conditional code and much of it is unnecessary. Clean this up to reduce the number of build combinations. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This function is only used in one place and does not need to use the preprocessor. Move it to the C file and convert it to a normal function. Drop fit_unsupported() since it is not used. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
At present EFI_SECURE BOOT selects RSA but does not necessarily enable FIT_SIGNATURE. Mostly this is fine, but a few boards do not enable it, so U-Boot tries to do RSA verification when loading FIT images, but it is not enabled. This worked because the condition for checking the RSA signature is wrong in the fit_image_verify_with_data() function. In order to fix it we need to fix this dependency. Make sure that FIT_SIGNATURE is enabled so that RSA can be used. It might be better to avoid using 'select' in this situation. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
We can use the new host_build() function for this, so drop it. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NAlexandru Gagniuc <mr.nuke.me@gmail.com>
-
由 Simon Glass 提交于
This is not needed with Kconfig, since we can use IS_ENABLED() easily enough. Drop it. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NAlexandru Gagniuc <mr.nuke.me@gmail.com>
-
由 Simon Glass 提交于
This is not needed with Kconfig, since we can use IS_ENABLED() easily enough. Drop it. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NAlexandru Gagniuc <mr.nuke.me@gmail.com>
-
由 Simon Glass 提交于
This is not needed with Kconfig, since we can use IS_ENABLED() easily enough and the board code is now in a separate file. Update the only place where this is used and drop it. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NAlexandru Gagniuc <mr.nuke.me@gmail.com>
-
由 Simon Glass 提交于
Add a host Kconfig for CRC32. With this we can use CONFIG_IS_ENABLED(CRC32) directly in the host build, so drop the unnecessary indirection. Add a few more conditions to SPL_CRC32 to avoid build failures as well as TPL_CRC32. Also update hash.c to make crc32 optional and to actually take notice of SPL_CRC32. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NAlexandru Gagniuc <mr.nuke.me@gmail.com>
-
由 Simon Glass 提交于
Add a host Kconfig for FIT_RSASSA_PSS. With this we can use CONFIG_IS_ENABLED(FIT_RSASSA_PSS) directly in the host build, so drop the forcing of this in the image.h header. Drop the #ifdef around padding_pss_verify() too since it is not needed. Use the compiler to check the config where possible, instead of the preprocessor. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NAlexandru Gagniuc <mr.nuke.me@gmail.com>
-
由 Simon Glass 提交于
Add a host Kconfig for FIT_VERBOSE. With this we can use CONFIG_IS_ENABLED(FIT_VERBOSE) directly in the tools build, so drop the forcing of this in the image.h header. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NAlexandru Gagniuc <mr.nuke.me@gmail.com>
-
由 Simon Glass 提交于
Add a host Kconfig for OF_LIBFDT. With this we can use CONFIG_IS_ENABLED(OF_LIBFDT) directly in the tools build, so drop the unnecessary indirection. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NAlexandru Gagniuc <mr.nuke.me@gmail.com>
-
由 Simon Glass 提交于
Make use of the host Kconfig for FIT. With this we can use CONFIG_IS_ENABLED(FIT) directly in the host build, so drop the unnecessary indirection. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NAlexandru Gagniuc <mr.nuke.me@gmail.com>
-
由 Simon Glass 提交于
We can use the __maybe_unused attribute to avoid some of the #ifdefs in this file. Update the functions accordingly. Note: The actual hashing interface is still a mess, with four separate combinations and lots of #ifdefs. This should really use a driver approach, e.g. as is done with partition drivers. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NAlexandru Gagniuc <mr.nuke.me@gmail.com>
-
由 Simon Glass 提交于
At present when building host tools, we force CONFIG_SHAxxx to be enabled regardless of the board Kconfig setting. This is done in the image.h header file. For SPL we currently just assume the algorithm is desired if U-Boot proper enables it. Clean this up by adding new Kconfig options to enable hashing on the host, relying on CONFIG_IS_ENABLED() to deal with the different builds. Add new SPL Kconfigs for hardware-accelerated hashing, to maintain the current settings. This allows us to drop the image.h code and the I_WANT_MD5 hack. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NAlexandru Gagniuc <mr.nuke.me@gmail.com>
-
由 Simon Glass 提交于
Unfortunately these were removed by mistake. This means that adding hash support to SPL brings in all software algorithms, with a substantial increase in code size. The origin of the problem was renaming them to SPL_FIT_xxx and then these were removed altogether in a later commit. Add them back. This aligns with CONFIG_MD5, for example, which has an SPL variant. Signed-off-by: NSimon Glass <sjg@chromium.org> Fixes: f5bc9c25 ("image: Rename SPL_SHAxxx_SUPPORT to SPL_FIT_SHAxxx") Fixes: eb5171dd ("common: Remove unused CONFIG_FIT_SHAxxx selectors") Reviewed-by: NAlexandru Gagniuc <mr.nuke.me@gmail.com>
-
由 Simon Glass 提交于
In preparation for enabling CONFIG_IS_ENABLED() on the host build, add some options to enable the various FIT options expected in these tools. This will ensure that the code builds correctly when CONFIG_TOOLS_xxx is distinct from CONFIG_xxx. Drop some #ifdefs which are immediately unnecessary (many more are in later patches). Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NAlexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: NAlexandru Gagniuc <mr.nuke.me@gmail.com>
-
由 Simon Glass 提交于
At present we must separately test for the host build for many options, since we force them to be enabled. For example, CONFIG_FIT is always enabled in the host tools, even if CONFIG_FIT is not enabled by the board itself. It would be more convenient if we could use, for example, CONFIG_IS_ENABLED(FIT) and get CONFIG_HOST_FIT, when building for the host. Add support for this. With this and the tools_build() function, we should be able to remove all the #ifdefs currently needed in code that is build by tools and targets. This will be even nicer when we move to using CONFIG(xxx) everywhere, since all the #ifdef and IS_ENABLED/CONFIG_IS_ENABLED stuff will go away. Signed-off-by: NSimon Glass <sjg@chromium.org> Suggested-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> # b4f73886Reviewed-by: NAlexandru Gagniuc <mr.nuke.me@gmail.com>
-
由 Simon Glass 提交于
With the new TOOLS_LIBCRYPTO and some other changes, it seems that we are heading towards calling this a tools build rather than a host build, although of course it does happen on the host. I cannot think of anything built by the host which cannot be described as a tool, so rename this function. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NAlexandru Gagniuc <mr.nuke.me@gmail.com>
-
由 Simon Glass 提交于
Drop some more ifdefs in image-board.c and also the FPGA part of bootm.c which calls into it. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Add a macro to handle manually relocating a pointer. Update the iamge code to use this to avoid needing #ifdefs. This also fixes a bug where the 'done' flag was not set. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Rather than adding an #ifdef and open-coding this calculation, add a helper function to handle it. Use this in the image code. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
To avoid having #ifdefs in a few functions which are completely different in the board and host code, create a new image-host.c file. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Tidy up the warnings. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
To avoid a large #ifdef in the image.c file, move the affected code into a separate file. Avoid any style fix-ups for easier review. Those are in the next patch. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Adjust this function so that preprocessor macros are not needed. With this, the host build uses more of the same header files as the target build. Rather than definining CONFIG_SYS_MALLOC_LEN, add a CONSERVE_MEMORY define, since that is the purpose of the value. This appears to have no impact on code size from a spot check of a few boards (snow, firefly-rk3288, boston32r2el, m53menlo). Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
The gzip API uses the u64 type in it, which is not available in the host build. This makes it impossible to include the header file. We could make this type available, but it seems unnecessary. Limiting the compression size to that of the 'unsigned long' type seems good enough. On 32-bit machines the limit then becomes 4GB, which likely exceeds available RAM anyway, therefore it should be sufficient. On 64-bit machines this is effectively u64 anyway. Update the header file and implementation to use 'ulong' instead of 'u64'. Add a definition of u32 for the cases that seem to need exactly that length. This should be safe enough. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
The zstd implementation prints the error in image_decomp() which is incorrect and does not match other algorithms. Drop this and let the caller report the error. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
At present this function is full of preprocessor macros. Adjust it to check for an unsupported algorithm after the switch(). This will allow us to drop the macros. Fix up the return-value path and an extra blank line while we are here. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Use the common function to avoid code duplication. Acked-by: NQu Wenruo <wqu@suse.com> Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
The existing zstd API requires the same sequence of calls to perform its task. Create a helper for U-Boot, to avoid code duplication, as is done with other compression algorithms. Make use of of this from the image code. Note that the zstd code lacks a test in test/compression.c and this should be added by the maintainer. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This function should have a comment explaining what it does. Add one. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
When passing a data buffer back from a function, it is not always clear who owns the buffer, i.e. who is responsible for freeing the memory used. An example of this is where multiple files are decompressed from the firmware image, using a temporary buffer for reading (since the compressed data has to live somewhere) and producing a temporary or permanent buffer with the resuilts. Where the firmware image can be memory-mapped, as on x86, the compressed data does not need to be buffered, but the complexity of having a buffer which is either allocated or not, makes the code hard to understand. Introduce a new 'abuf' which supports simple buffer operations: - encapsulating a buffer and its size - either allocated with malloc() or not - able to be reliably freed if necessary - able to be converted to an allocated buffer if needed This simple API makes it easier to deal with allocated and memory-mapped buffers. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Add a function to duplicate a memory region, a little like strdup(). Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 08 10月, 2021 6 次提交
-
-
https://source.denx.de/u-boot/custodians/u-boot-marvell由 Tom Rini 提交于
- a37xx: pci: Increase PCIe IO size from 64 KiB to 1 MiB (Pali) - phy: marvell: a3700: Misc improvements (Pali) - a38x serdes cleanup (Pali) - A3720 PCIe enhancements (Pali & Marek) - mvebu: mvebu_armada-8k: Puzzle M801 enhancements (Robert) - mvebu: x530: Remove custom kwbimage.cfg (Chris) - mvebu: Select SPL_SKIP_LOWLEVEL_INIT on ARMADA_32BIT (Stefan)
-
由 Chris Packham 提交于
Commit ca1a4c86 ("mvebu: select boot device at SoC level") made it unnecessary for the A385 boards to have their own kwbimage.cfg but as the x530 was in flight at the time it was added with it's own kwbimage.cfg. Remove the custom kwbimage.cfg as the SoC level file is suitable. Signed-off-by: NChris Packham <judge.packham@gmail.com> Reviewed-by: NStefan Roese <sr@denx.de>
-
由 Robert Marko 提交于
Since the CP1 pinctrl is not properly set in the DTS, there is no need for setting the pinctrl by writing hardcoded values to the MPP registers. So, drop the code relating to that. Fixes: 87c220d0 ("arm: mvebu: mvebu_armada-8k: Add support for initializing iEi Puzzle-M801 networking") Signed-off-by: NRobert Marko <robert.marko@sartura.hr> Reviewed-by: NStefan Roese <sr@denx.de>
-
由 Robert Marko 提交于
Current CP1 pinctrl that is set on the Puzzle M801 is incorrect. CP1 pins are only used for the SMI bus and the MSS I2C, all other pins are just GPIO-s. Due to this being set completely wrong, the pinctrl was actually ended up being hardcoded in the board_early_init_f() step so that SMI would work. That is obviously not the right thing to do, so convert the register hex values that were being written to individual pin modes and set it in the DTS. Add the SMI pins to the CP1 MDIO node as otherwise CP1 pinctrl does not get probed without an consumer. Fixes: 2ae2b8a2 ("arm: mvebu: Initial iEi Puzzle-M801 support") Signed-off-by: NRobert Marko <robert.marko@sartura.hr> Reviewed-by: NStefan Roese <sr@denx.de>
-
由 Stefan Roese 提交于
Select SPL_SKIP_LOWLEVEL_INIT on 32bit Armada platforms via Kconfig, as this was removed from mach/config.h in a2ac2b96 ("Convert CONFIG_SKIP_LOWLEVEL_INIT et al to Kconfig"). Signed-off-by: NStefan Roese <sr@denx.de> Fixes: a2ac2b96 ("Convert CONFIG_SKIP_LOWLEVEL_INIT et al to Kconfig") Cc: Tom Rini <trini@konsulko.com> Cc: Marek Behún <kabel@kernel.org> Cc: Pali Rohár <pali@kernel.org> Tested-by: NPali Rohár <pali@kernel.org>
-
由 Marek Behún 提交于
There were several changes for this structure but the documentation was not changed at the time. Fix this. Signed-off-by: NMarek Behún <marek.behun@nic.cz> Reviewed-by: NStefan Roese <sr@denx.de>
-