Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>

Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>

do_bootelf_exec was a weak function without a prototype nor
and strong version. Just make it static.
Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>

Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>

Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>

Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>

Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>

get_phy_id is marked weak but has no protype nor a
strong version, just make it static. Use __weak for
board_phy_config.
Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>

Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>

For various reasons (design, errata) boards may need to implement their
own versions of these accessors.  So in the case of
CONFIG_CFI_FLASH_USE_WEAK_ACCESSOR mark the functions as weak.  In the
normal case mark them as static to allow for better optimization.
Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>
[trini: Reword commit message]
Signed-off-by: NTom Rini <trini@ti.com>

Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>

Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>
Acked-by: NAlbert ARIBAUD <albert.u.boot@aribaud.net>

Since the environment "VENDOR" is set in tcsh, it must be cleared in our
makefile.  Otherwise, boards without CONFIG_SYS_VENDOR fail to build:

  > make CROSS_COMPILE=arm-linux-gnueabi- wandboard_quad_defconfig all
    [ snip ]
    AR      arch/arm/lib/lib.a
    CC      arch/arm/lib/eabi_compat.o
  scripts/Makefile.build:55: /home/foo/u-boot/board/unknown/wandboard/ \
  Makefile: No such file or directory
  make[2]: *** No rule to make target `/home/foo/u-boot/board/unknown/ \
  wandboard/Makefile'.  Stop.
  make[1]: *** [board/unknown/wandboard] Error 2
  make: *** [__build_one_by_one] Error 2
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Reported-by: NTom Everett <tom@khubla.com>
Reported-by: NJeroen Hofstee <jeroen@myspectrum.nl>

Without the private libgcc, we need a full multilib toolchain with
different libgcc or multiple toolchains to build all BE/LE and
hard-float/soft-float variants of MIPS boards.  That is not feasible.

This commit allows us to build all the MIPS boards with a single
kernel.org toolchain:

https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.9.0/
x86_64-gcc-4.9.0-nolibc_mips-linux.tar.xz

This change sounds reasonable for most users.  If necessary,
you can disable this option via "make menuconfig" or friends.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: NDaniel Schwierzeck <daniel.schwierzeck@gmail.com>

When spl/.config is updated by "make spl/menuconfig" or friends,
spl/include/config/auto.conf, spl/include/generated/autoconf.h
and some other files must be updated by "make silentoldconfig".

There is no hook for SPL in the top Makefile, so this commit
touches .config when spl/.config is updated to invoke silentoldconfig.
Likewise for TPL.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>

cmd_u-boot-spl includes $(PLATFORM_LIBS) which changes
when CONFIG_USE_PRIVATE_GCC is updated.  The u-boot-spl image
should be re-linked if any prerequisite is newer than it
or the command line has changed.
$(call, if_changed,...) should be used instead of $(call cmd,...).
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>

The private libgcc is supported only on ARM, MIPS, PowerPC, SH, x86.
Those architectures should "select" HAVE_PRIVATE_LIBGCC and
CONFIG_USE_PRIVATE_LIBGCC should depend on it.

Currently, this option is enabled on Tegra boards and x86 architecture.
Move the definition from header files to Kconfig.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Tested-by: NSimon Glass <sjg@chromium.org>
Acked-by: NSimon Glass <sjg@chromium.org>
Cc: Stephen Warren <swarren@nvidia.com>
Cc: Tom Warren <twarren@nvidia.com>

Now CONFIG_USE_PRIVATE_LIBGCC is only used as a boolean macro.
Remove CONFIG_USE_PRIVATE_LIBGCC=path/to/libgcc syntax.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Tested-by: NSimon Glass <sjg@chromium.org>
Acked-by: NSimon Glass <sjg@chromium.org>

The motivation of this commit is to change CONFIG_USE_PRIVATE_LIBGCC
to a boolean macro so we can move it to Kconfig.

In the current implementation, there are two forms of syntax
for this macro:

  - CONFIG_USE_PRIVATE_LIBGCC=y
  - CONFIG_USE_PRIVATE_LIBGCC=path/to/private/libgcc

The latter is only used by x86 architecture.
With a little bit refactoring, it can be converted to the former.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Tested-by: NSimon Glass <sjg@chromium.org>
Acked-by: NSimon Glass <sjg@chromium.org>

CONFIG_SYS_HZ is always defined as 1000 in config_fallbacks.h
(but some boards still have redundant definitions).

This commit moves the definition and the document in README to
Kconfig.  Since lib/Kconfig can assure that CONFIG_SYS_HZ is 1000,
the sanity check in lib/time.c should be removed.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Reviewed-by: NMarek Vasut <marex@denx.de>

Add target to build it automatically upon "make" / MAKEALL. This can/should
be set by board / cpu specific headers if a special U-Boot image is
required for this SoC / board.

E.g. used by Marvell Armada XP to automatically build the u-boot.kwb
target.
Signed-off-by: NStefan Roese <sr@denx.de>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>

This patch integrates the Barebox version of this kwbimage.c file into
U-Boot. As this version supports the image version 1 type for the
Armada XP / 370 SoCs.

It was easier to integrate the existing and known to be working Barebox
source than to update the current U-Boot version to support this
v1 image header format. Now all Marvell MVEBU SoCs are supported:

Image type 0: Kirkwood & Dove
Image type 1: Armada 370 & Armada XP

Please note that the current v1 support has this restuction (same as
has Barebox version):

Not implemented: support for the register headers and secure headers
in v1 images

Tested on Marvell DB-78460-BP eval board.
Signed-off-by: NStefan Roese <sr@denx.de>
Tested-by: NLuka Perkov <luka@openwrt.org>

Signed-off-by: NStefan Roese <sr@denx.de>
Tested-by: NLuka Perkov <luka@openwrt.org>

The barebox version of the kwboot tool has evolved a bit. To support
Armada XP and Dove. Additionally a few minor fixes have been applied.
So lets sync with the latest barebox version.

Please note that the main difference between both versions now is, that
the U-Boot version still supports the -p option, to dynamically patch
an image for UART boot mode. I didn't test it now though.
Signed-off-by: NStefan Roese <sr@denx.de>
Tested-by: NLuka Perkov <luka@openwrt.org>

All those functions removed with this patch are not accessed at all. So lets
remove them.
Signed-off-by: NStefan Roese <sr@denx.de>

The maxBCM board is equipped with the Marvell Armada-XP MV78460 SoC. It
integrates an SPI NOR flash and an Marvell 88E6185 switch.
Signed-off-by: NStefan Roese <sr@denx.de>

This patch adds basic support for the Marvell DB-MV784MP-GP evaulation
board. This is the first board that uses the recently created
Armada XP 78460 SoC support.
Signed-off-by: NStefan Roese <sr@denx.de>
Tested-by: NLuka Perkov <luka@openwrt.org>

This basic support for the Marvell Armada XP is base on the existing kirkwood
support. Which has been generatized by moving some common files into
common marvell locations.

This is in preparation for the upcoming Armada XP MV78460 support.
Signed-off-by: NStefan Roese <sr@denx.de>
Tested-by: NLuka Perkov <luka@openwrt.org>

To support the Armada XP SoC, we just need to include the correct header.
Signed-off-by: NStefan Roese <sr@denx.de>
Acked-by: NHeiko Schocher <hs@denx.de>
Tested-by: NLuka Perkov <luka@openwrt.org>

The Marvell MV78460 eval board DB-78460-BP seems to need a longer
PHY autonegotiation timeout than the "standard" 4 seconds. So lets
make this timeout configurable. If not defined in the board config
header the original 4000ms is used.
Signed-off-by: NStefan Roese <sr@denx.de>
Cc: Joe Hershberger <joe.hershberger@gmail.com>

This patch adds support for the NETA ethernet controller which is integrated
in the Marvell Armada XP SoC's. This port is based on the Linux driver which
has been stripped of the in U-Boot unused portions.

Tested on the Marvell MV78460 eval board db-78460-bp.
Signed-off-by: NStefan Roese <sr@denx.de>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
Tested-by: NLuka Perkov <luka@openwrt.org>

Additionally the SDRAM address decoding register address is not hard coded
in the C code any more. A define is introduced for this base address.

This makes is possible to use those gpio functions from other MVEBU SoC's
as well.
Signed-off-by: NStefan Roese <sr@denx.de>
Tested-by: NLuka Perkov <luka@openwrt.org>
Acked-by: NPrafulla Wadaskar <prafulla@marvell.com>

This makes is possible to use this SPI driver from other MVEBU SoC's as well.
As the upcoming Armada XP support will do.
Signed-off-by: NStefan Roese <sr@denx.de>
Reviewed-by: NJagannadha Sutradharudu Teki <jaganna@xilinx.com>
Tested-by: NLuka Perkov <luka@openwrt.org>
Acked-by: NPrafulla Wadaskar <prafulla@marvell.com>

This makes is possible to use those gpio functions from other MVEBU SoC's as well.
Signed-off-by: NStefan Roese <sr@denx.de>
Tested-by: NLuka Perkov <luka@openwrt.org>
Acked-by: NPrafulla Wadaskar <prafulla@marvell.com>

Compile the pin multiplexing only on Kirkwood platforms. As the
Armada XP doesn't need it.
Signed-off-by: NStefan Roese <sr@denx.de>
Reviewed-by: NJagannadha Sutradharudu Teki <jaganna@xilinx.com>
Tested-by: NLuka Perkov <luka@openwrt.org>
Acked-by: NPrafulla Wadaskar <prafulla@marvell.com>

These mbus functions are ported from Barebox. The Barebox version is
ported from Linux. These functions will be first used by the upcoming
Armada XP support. Later other Marvell SoC's will be adopted to use
these functions as well (Kirkwood, Orion).
Signed-off-by: NStefan Roese <sr@denx.de>
Tested-by: NLuka Perkov <luka@openwrt.org>

This patch does the following:
- Rename defines and registers to not use kirkwood
- Remove unused defines
- Use clrsetbits() accessor functions
- Coding style cleanup
- Clear 25MHZ bit in timer controller register init for Armada XP

There is no functional change for kirkwood. At least not intentionally.

This will be used by the upcoming Armada XP support.
Signed-off-by: NStefan Roese <sr@denx.de>
Tested-by: NLuka Perkov <luka@openwrt.org>
Acked-by: NPrafulla Wadaskar <prafulla@marvell.com>

This move makes it possible to use this kirkwood SPI driver from other
MVEBU platforms as well. This will be used by the upcoming Armada XP
support.
Signed-off-by: NStefan Roese <sr@denx.de>
Reviewed-by: NJagannadha Sutradharudu Teki <jaganna@xilinx.com>
Tested-by: NLuka Perkov <luka@openwrt.org>
Acked-by: NPrafulla Wadaskar <prafulla@marvell.com>

This move makes is possible to use this header not only from kirkwood
platforms but from all Marvell mvebu platforms.
Signed-off-by: NStefan Roese <sr@denx.de>
Tested-by: NLuka Perkov <luka@openwrt.org>
Acked-by: NPrafulla Wadaskar <prafulla@marvell.com>