- 28 7月, 2020 8 次提交
-
-
由 Patrick Delaunay 提交于
Save the environment at the end of the U-Boot partition, the GPT partition named "ssbl" in SD card or eMMC and avoid requirements on the "bootfs" file system generated via specific raw tools (like wic and genimage). With the previous configuration of the U-Boot environment saved in ext4 file, U-Boot need to create/modify the file uenv.txt in the ext4 file system; so this EXT4 file system need to be generated without some functionality, like metadata_csum and dir_index, because they are not supported by U-Boot. Reviewed-by: NPatrice Chotard <patrice.chotard@st.com> Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrick Delaunay 提交于
Add support of CONFIG_ENV_IS_IN_MMC in env_get_location, used for all mmc device (SD card and eMMC). The 2 configs CONFIG_ENV_IS_IN_MMC and CONFIG_ENV_IS_IN_EXT4 are incompatible. Add the weak function mmc_get_env_dev to select the mmc boot instance. Reviewed-by: NPatrice Chotard <patrice.chotard@st.com> Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrick Delaunay 提交于
Since commit d877f8fd ("arm: provide a function for boards init code to modify MMU virtual-physical map") the parameter of mmu_set_region_dcache_behaviour need to be MMU_SECTION_SIZE aligned. Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com> Reviewed-by: NPatrice Chotard <patrice.chotard@st.com>
-
由 Patrick Delaunay 提交于
As the dbgmcu_init use the function bsec_dbgswenable which is based on the DM and DT, its call can't be done before the spl is initialized (driver model, DT and malloc) in board_init_f::spl_early_init(). This function call is moved later in spl_board_init(). Fixes: bd3f60d2 ("arm: stm32mp: protect DBGMCU_IDC access with BSEC") Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com> Reviewed-by: NPatrice Chotard <patrice.chotard@st.com>
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@konsulko.com>
-
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic由 Tom Rini 提交于
- Handle errors in Meson serial driver - Enable HDMI, keyboard and ADC for Odroid-C2
-
https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq由 Tom Rini 提交于
- Bug fixes and updates on ls2088a,ls1028a, ls1046a, ls1043a, ls1012a - lx2-watchdog support - layerscape: pci-endpoint support, spin table relocation fixes and cleanups - fsl-crypto: RNG support and bug fixes
-
由 Tom Rini 提交于
With the migration to python3 for all of our tests, we need to install pyelftools via pip now rather than the system tools as they will otherwise not be present in our virtualenv. Signed-off-by: NTom Rini <trini@konsulko.com> --- Changes in v2: Switch to pip
-
- 27 7月, 2020 32 次提交
-
-
https://gitlab.denx.de/u-boot/custodians/u-boot-dm由 Tom Rini 提交于
binman support for FIT new UCLASS_SOC patman switch 'test' command minor fdt fixes patman usability improvements
-
由 Anand Moon 提交于
Enable options to permit HDMI output on Odroid-C2 GXBB boards. Enable VPU Power Domain. Enable ADC and USB_KERBOARD. Reviewed-by: NNeil Armstrong <narmstrong@baylibre.com> Signed-off-by: NAnand Moon <linux.amoon@gmail.com>
-
由 Neil Armstrong 提交于
This checks and handles RX errors on the Amlogic UART controller after experiencing errors on the Khadas VIM3 & VIM3L when UART AO A lines are not connected. When the RX line is not connected, the first byte is erroneous and breaks the U-Boot autoboot, breaking automatic boot. This checks and drops any erroneous RX byte on pending and getc callbacks to avoid returning true to pending when an error byte is in the FIFO. Fixes: bfcef28a ("arm: add initial support for Amlogic Meson and ODROID-C2") Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com> Tested-by: NGuillaume La Roque <glaroque@baylibre.com>
-
https://gitlab.denx.de/u-boot/custodians/u-boot-sh由 Tom Rini 提交于
- R8A774A1 / Beacon EmbeddedWorks RZG2M Dev Kit support
-
-
由 Tom Rini 提交于
- Assorted environment fixes. - Enhance environment in MMC and controlled via OF_CONTROL - Allow for environment in FAT to use the same device we boot from rather than be hard-coded.
-
由 Kuldeep Singh 提交于
Restore CONFIG_ENV_ADDR value to fix boot hang with IFC-NOR which is default boot source. Signed-off-by: NAshish Kumar <ashish.kumar@nxp.com> Signed-off-by: NKuldeep Singh <kuldeep.singh@nxp.com> Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Zhao Qiang 提交于
Add dspi flash device node to fsl-ls1028a-qds.dtsi Signed-off-by: NZhao Qiang <qiang.zhao@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Zhao Qiang 提交于
Enable support to compile SBSA driver. Signed-off-by: NZhao Qiang <qiang.zhao@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Zhao Qiang 提交于
Add watchdog node which is sbsa into lx2160a dtsi Signed-off-by: NZhao Qiang <qiang.zhao@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Zhao Qiang 提交于
According to Server Base System Architecture (SBSA) specification, the SBSA Generic Watchdog has two stage timeouts: the first signal (WS0) is for alerting the system by interrupt, the second one (WS1) is a real hardware reset. More details about the hardware specification of this device: ARM DEN0029B - Server Base System Architecture (SBSA) This driver can operate ARM SBSA Generic Watchdog as a single stage In the single stage mode, when the timeout is reached, your system will be reset by WS1. The first signal (WS0) is ignored. Signed-off-by: NZhao Qiang <qiang.zhao@nxp.com> Signed-off-by: NBiwen Li <biwen.li@nxp.com> Reviewed-by: NStefan Roese <sr@denx.de> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Hou Zhiqiang 提交于
Add Root Complex and Endpoint mode specific config entries, such that it's feasible to enable the RC and/or EP mode driver indepently. Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Xiaowei Bao 提交于
Add the PCIe EP mode support for lx2160a-v2 platform. Signed-off-by: NXiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Xiaowei Bao 提交于
Modify the ls_pcie_dump_atu function, make it can print the INBOUND windows registers. Signed-off-by: NXiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Xiaowei Bao 提交于
Add the INBOUND configuration for VFs of PF. Signed-off-by: NXiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Xiaowei Bao 提交于
Due to the ls2085a and ls2080a use different way to set the BAR size, so add the BAR size init code here. Signed-off-by: NXiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Xiaowei Bao 提交于
The VF_BARn_REG register's Prefetchable and Type bit fields are overwritten by a write to VF's BAR Mask register. workaround: Before writing to the VF_BARn_MASK_REG register, write 0b to the PCIE_MISC_CONTROL_1_OFF register. Signed-off-by: NXiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Xiaowei Bao 提交于
Add the multiple function support for Layerscape platform, some PEXs of Layerscaple platform have more than one PF. Signed-off-by: NXiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Xiaowei Bao 提交于
Add the PCIe EP node for ls1046a. Signed-off-by: NXiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Xiaowei Bao 提交于
Some EP deivces need to initialize before RC scan it, e.g. NXP layerscape platform, so add the init function in pci_ep uclass. Signed-off-by: NXiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Xiaowei Bao 提交于
Split the RC and EP driver, and reimplement the EP driver base on the EP framework. Signed-off-by: NXiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com> [Rebased] Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Wasim Khan 提交于
lx2160a rev2 requires 4KB space for type0 and 4KB space for type1 iATU window. Increase configuration size to 8KB to have sufficient space for type0 and type1 window. Signed-off-by: NWasim Khan <wasim.khan@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Manish Tomar 提交于
Add TFA secure boot defconfig and Enables secure boot related configs in it. Signed-off-by: NManish Tomar <manish.tomar@nxp.com> Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Biwen Li 提交于
- Drop ifdef CONFIG_SYS_I2C to initialize baudrate of i2c - Drop warning of i2c_early_init_f as follows, warning: implicit declaration of function 'i2c_early_init_f'; did you mean 'arch_early_init_r'? [-Wimplicit-function-declaration] Signed-off-by: NBiwen Li <biwen.li@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Biwen Li 提交于
Enable secure system counter in board_early_init_f for udelay() to fix a bug that always return 0 by timer_read_counter() when boot from qspi(No TFA) Signed-off-by: NBiwen Li <biwen.li@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Biwen Li 提交于
- Drop ifdef CONFIG_SYS_I2C to initialize baudrate of i2c - Drop warning of i2c_early_init_f as follows, warning: implicit declaration of function 'i2c_early_init_f'; did you mean 'arch_early_init_r'? [-Wimplicit-function-declaration] Signed-off-by: NBiwen Li <biwen.li@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Biwen Li 提交于
Enable secure system counter in board_early_init_f for udelay() to fix a bug that always return 0 by timer_read_counter() when boot from qspi(No TFA) Signed-off-by: NBiwen Li <biwen.li@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Biwen Li 提交于
Move i2c_early_init_f to common function to initialize baudrate of i2c Signed-off-by: NBiwen Li <biwen.li@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Michael Walle 提交于
Register the random number generator with the rng subsystem in u-boot. This way it can be used by EFI as well as for the 'rng' command. Signed-off-by: NMichael Walle <michael@walle.cc> Tested-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Michael Walle 提交于
If it is already instantiated tear it down first and then reinstanciate it again with prediction resistance. Signed-off-by: NMichael Walle <michael@walle.cc> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Michael Walle 提交于
The secure keys (TDKEK, JDKEK, TDSK) can only be generated once after a POR. Otherwise the RNG4 will throw an error. Signed-off-by: NMichael Walle <michael@walle.cc> Reviewed-by: NHoria Geantă <horia.geanta@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Michael Walle 提交于
Since Era 10, the version registers changed. Add the version registers and use them on newer modules. Signed-off-by: NMichael Walle <michael@walle.cc> Reviewed-by: NHoria Geantă <horia.geanta@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-