- 26 3月, 2021 40 次提交
-
-
由 Simon Glass 提交于
At present we always use the main devicetree for SPL/TPL as well when setting up the state. But this it not needed if there is a real devicetree for SPL or TPL. In fact it confuses things since we cannot distinguish between one being provided and using the fake one. Update the code to create the fakes only when requested. Put the mapping in a constant so we can use it elsewhere. Rename 'other_fname' to 'fname' while we are here since there is nothing 'other' about it. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
A few tests declare a type when this can be inferred from the node name. Drop these lines, since it might cause confusion. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This entry holds the padding between the end of of TPL binary and the end of BSS. This region must be left empty so that the devicetree can be appended correctly and remain accessible without interfering with BSS. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Allow this entry type to be placed in an image. This is the TPL binary, without a devicetree appended. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Since this is an execuable we should be able insert symbol values into it. Add support for this. Use common code for this test and the original testSymbols. Use hex consistently for the values and add some more comments. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
The documentation for this entry indicates that the SPL binary is included along with the padding. It is not, so update it to correct the error. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Several entries currently use an underscore in the entry-type name, but in fact a hyphen is used. Update the docs to fix this as it might be confusing. Also simplify the 'filename' comment and fix the 'operation' typo. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Regenerate the entry documentation, which step was missed when the files-align feature was added. Fixes: 6eb99326 ("binman: Support alignment of files") Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Move the documentation to the base method as it is with other methods. Also update it a little while we are here. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Extracting files to the current directory is not normally a very friendly thing to do, but it can be warranted, e.g. in a new temporary dir. At present binman reports an error when such an attempt is made. Fix it. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
With Apollo Lake, SPL is placed in read-only memory. Set this new option so that OF_PLATDATA_INST can be used. Signed-off-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
These devices are not actually built in TPL but are currently active in the TPL devicetree. For of-platdata-inst this means that we will try to generate devices for them, which fails. Update them to be active only in U-Boot proper. Signed-off-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
We don't use these in TPL or SPL, so drop them. Signed-off-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
We don't normally need this driver in TPL/SPL, so drop it for now. It can be enabled by individual boards if needed. Signed-off-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
With TPL we don't need full PCI support and it adds to code size. Instead, a simple_bus driver is good enough to be able to read and write the PCI config and do a little basic setup. So at present there are two drivers in U-Boot called pci_x86. One is in UCLASS_PCI, used in SPL and U-Boot proper. The other is in UCLASS_SIMPLE_BUS and used only in TPL. Add a tag to tell dtoc about this, so it knows which one to use when generating the devices and uclasses. Signed-off-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
With the standard of-platdata we must fix up driver_data manually. With of-platadata-inst this is not necessary, since it is added to the device by dtoc. Update the code to handle this. Signed-off-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This enum is needed to generate build-time devices. Tell dtoc where to find the header, to avoid compile errors in the generated code. Signed-off-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
The dm.h header should come first. In fact it needs to, since otherwise the driver model definitions are not available to dt-structs.h Fix this, since it causes problems with OF_PLATDATA_INST. Signed-off-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Collect this together in one place, so driver model can access set it up in a new place if needed. Signed-off-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Add a description of the new features, along with internal technical documentation. Signed-off-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This doc has a few pieces that are out-of-date. Fix these. Also we have started to use 'devicetree' instead of 'device tree' or 'device-tree' since it is easier to see as a single term, so replace all ocurrences accordingly. Also move the caveats to the end, since this is a fairly solid part of U-Boot now. Signed-off-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Add a warning to each of these functions so that people do not attempt to use them outside driver model. Signed-off-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Make use of the new priv/plat data region if enabled. This is implemented as a simple offset from the position set up by dtoc to the new position. So long as all access goes through dm_priv_to_rw() this is safe. Signed-off-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Collect this together in one place, so driver model can access set it up in a new place if needed. Signed-off-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
At present the device priv/data data allocated by dtoc is stored in the data section along with other variables. On some platforms it is better to allocate space for it separately, e.g. if SPL is running from read-only memory. Create a new space with the same size as that allocated by dtoc, ready for use. Signed-off-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
When of-platdata-inst is active, use the flags in the new udevice_rt table, dropping them from the main struct udevice. This ensures that the latter is not updated at runtime. Signed-off-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
At present when driver model needs to change a device it simply updates the struct udevice structure. But with of-platdata-inst most of the fields are not modified at runtime. In fact, typically only the flags need to change. For systems running SPL from read-only memory it is convenient to separate out the runtime information, so that the devices don't need to be copied before being used. Create a new udevice_rt table, similar to the existing driver_rt. For now it just holds the flags, although they are not used in this patch. Add a new Kconfig for the driver_rt data, since this is not needed when of-platdata-inst is used. Signed-off-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Some systems (e.g. x86 APL) run SPL from read-only memory. The device instances created by dtoc are therefore not writeable. To make things work we would need to copy the devices to read/write memory. To avoid this, add an option to use a separate runtime struct for devices, just as is done for drivers. This can be used to hold information that changes at runtime, avoiding the need for a copy. Also add a Kconfig option for read-only SPL, which selects this feature. Signed-off-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Add this new board to the test plans. Travis-CI is left out, since it is being removed soon due to lack of capacity. Signed-off-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Run the tests on this build too, to prevent regressions. Signed-off-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Move sandbox_spl over to use OF_PLATDATA_INST. Create a new board to test the case when this is not enabled, since we will be keeping that code around for several months and want to avoid regressions. Skip the dm_test_of_plat_dev() test since driver info is not available for OF_PLATDATA_INST. Signed-off-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
With recent changes this can be supported again. Add it back. This reverts commit d85f2c4f. Signed-off-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
At present the i2c emulators require access to the devicetree, which is not possible (by design) with of-platdata. Add a way for drivers to record the of-platdata index of their emulator, so that we can still find the emulator. This allows i2c emulation to work with of-platdata. Signed-off-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
The test framework reinits driver model tests before running each test. Since malloc_simple does not support free(), this eventually runs out of memory. Fix it for now by increasing the space to 32KB. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Simon Glass 提交于
This function finds a device by its driver_info index. With of-platdata-inst we do not use driver_info, but instead instantiate udevice records at build-time. However the semantics of using the function are the same in each case: the caller provides an index and gets back a device. So rename the function to device_get_by_ofplat_idx(), so that it can be used for both situations. The caller does not really need to worry about the details. Signed-off-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
At present the structs used by these drivers are declared in the C files and so are not accessible to dtoc. Move them to header files, as required. Signed-off-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
At present this function is included in the build but with of-platdata it only services to produce a confusing link error complaining about a call to dev_read_u32_default(). Drop it so that any call to uclass_find_device_by_phandle() is flagged as an error, making it easier to see what is going on. Signed-off-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This function is now only used in a test. Drop it. Also drop DM_DRVINFO_GET() which was the only purpose for having the function. Signed-off-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Create a version of this driver for sandbox so that it can use the of-platdata struct. Signed-off-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
We need to allow SoCs to create their own drivers for this so that they can use their own of-platdata structs. To minimise code duplication, export the driver operations and the ofdata_to_plat() setup function. Signed-off-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NSimon Glass <sjg@chromium.org>
-