Improve error messages in case of invalid/unset ethernet addresses.
Signed-off-by: NPavel Machek <pavel@denx.de>

This has been disabled for ARM in initr_scsi since that function was
introduced. However it works fine for me on Cubieboard and Cubietruck (with the
upcoming AHCI glue patch).

I also tested on two random ARM platforms which seem to define CONFIG_CMD_SCSI:
 - highbank worked fine (on midway hardware)
 - omap5_uevm built OK and I confirmed using objdump that things were as
   expected (i.e. the default weak scsi_init nop was used).

While there remove the mismatched comment from the #endif (omitting the comment
seems to be the prevailing style in this file).
Signed-off-by: NIan Campbell <ijc@hellion.org.uk>
Acked-by: NSimon Glass <sjg@chromium.org>

In 73545f75 "ahci: wait longer for link" I increased the
timeout to 40ms based on the observed behaviour of a WD disk on a
Cubietruck. Since then Karsten Merker and myself have both
observed timeouts with HGST disks (Karsten on Cubietruck, me on
Cubieboard2). Increasing the timeout to ~175ms fixes this, so go
to 200ms for a bit of headroom.
Signed-off-by: NIan Campbell <ijc@hellion.org.uk>
Cc: Karsten Merker <merker@debian.org>
Acked-by: NHans de Goede <hdegoede@redhat.com>

There have been /errlog and /reloc_off in the top level .gitignore
since commit 1b4aaffe added it about 7 years ago.

But they are no longer generated.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>

Add more entries to .mailmap for the canonical names with
50 commits or more.

This commit was generated by the following command:

  scripts/mailmapper > tmp; mv tmp .mailmap
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>

This tool helps to create/update the mailmap file.

It runs 'git shortlog' internally and searches differently spelled author
names which share the same email address. The author name with the most
commits is asuumed to be a canonical real name. If the number of commits
from the cananonical name is equal to or greater than 'MIN_COMMITS' (=50),
the entry for the cananical name will be output. ('MIN_COMMITS' is used
here because we do not want to create a fat mailmap by adding every author
with only a few commits.)

If there exists a mailmap file specified by the mailmap.file configuration
options or '.mailmap' at the toplevel of the repository, it is used as
a base file.

The base file and the newly added entries are merged together and sorted
alphabetically (but the comment block is kept untouched), and then printed
to standard output.

 Usage
 -----

  scripts/mailmapper

prints the mailmapping to standard output.

  scripts/mailmapper > tmp; mv tmp .mailmap

will be useful for updating '.mailmap' file.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>

This is the first version of .mailmap created by hand.
Please see "man git-shortlog" for what this commit is trying to do.

Without this file, for example, "git shortlog -n -s" shows as follows:

  2693  Wolfgang Denk     <------
  1002  Stefan Roese      <------
   811  wdenk             <------
   808  Mike Frysinger
   806  Simon Glass
     [snip]
   177  Matthias Fuchs
   154  stroese           <------
   153  Timur Tabi

And then, with this file, it shows as follows:

  3504  Wolfgang Denk     <------
  1156  Stefan Roese      <------
   808  Mike Frysinger
   806  Simon Glass
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Wolfgang Denk <wd@denx.de>

Whitespace cleanups.
Signed-off-by: NPavel Machek <pavel@denx.de>

Replace the TAGS target name by the actual ctags target name.
Also, add etags target documentation.

Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: NIgor Grinberg <grinberg@compulab.co.il>

Commit efcf8619 (kbuild: use scripts/Makefile.clean)
refactored the cleaning targets and accidentially replaced the actually
generated "ctags" and "etags" files in the file list by "tags" and "TAGS".
"tags" and "TAGS" are not part of the Makefile build targets and
therefore should not be a part of the list for clean targets.

Substitute the actually generated files instead, to fix the clean
targets behavior.

Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: NIgor Grinberg <grinberg@compulab.co.il>

Commit 9e414032 (kbuild: change out-of-tree build)
changed the U-Boot build working directory to the output tree
for the out-of-tree builds.
This broke the {c,e}tags/cscope build targets as TAG_SUBDIRS variable
collected directories based on assumption that the build working
directory is the U-Boot source tree directory.

Fix the {c,e}tags/cscope build targets by adding the $(srctree) prefix.
Also, remove the $(obj) prefix from the etags build target to finish
the $(obj) prefix removal started by the same commit.

Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: NIgor Grinberg <grinberg@compulab.co.il>

Use the new option -r for env import.
Signed-off-by: NAlexander Holler <holler@ahsoftware.de>

Use the new option -r for env import.
Signed-off-by: NAlexander Holler <holler@ahsoftware.de>

Use the new option -r for env import.
Signed-off-by: NAlexander Holler <holler@ahsoftware.de>

When this option is enabled, CRLF is treated like LF when importing environments
from text files, which means CRs ('\r') in front of LFs ('\n') are just ignored.

Drawback of enabling this option is that (maybe exported) variables which have
a trailing CR in their content will get imported without that CR. But this
drawback is very unlikely and the big advantage of letting Windows user create
a *working* uEnv.txt too is likely more welcome.
Signed-off-by: NAlexander Holler <holler@ahsoftware.de>

This board is close in binary size to one of its hard limits, so disable
SHA256 FIT image support to gain some breathing room.
Signed-off-by: NTom Rini <trini@ti.com>

As I initially suspected overflow in time handling, I took a detailed
look at lib/time.c. This adds comments about units being used, reduces
amount of type casting being done, and makes __udelay() always wait at
least one tick. (Current code could do no delaying at all for short
delays).
Signed-off-by: NPavel Machek <pavel@denx.de>

clang chokes about the concept of having an alias to an
always_inlined function. gcc likely just ignores the always
inlined since binary sizes are equal before and after this
patch. Convert the aliases to weak functions and provide
missing prototypes.

cc: Pavel Herrmann <morpheus.ibis@gmail.com>
Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>

Since no board defines CONFIG_TUNE_PIO this is just dead
code, so remove it.

cc: Pavel Herrmann <morpheus.ibis@gmail.com>
Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>

Just for type checking.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Marek Vasut <marex@denx.de>
Acked-by: NMarek Vasut <marex@denx.de>

The function still returns the same value.

The comment block is no longer necessary because our intention is
clear enough by using DIV_ROUND_CLOSEST() macro.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>

If CONFIG_OMAP1610 is defined, the code returning the fixed value (26)
is enabled. But this case is covered by the following code.

(CONFIG_SYS_NS16550_CLK + (gd->baudrate * (MODE_X_DIV / 2))) /
    (MODE_X_DIV * gd->baudrate)
= (48000000 + (115200 * (16 / 2))) / (16 * 115200)
= 48921600 / 1843200
= 26

The "#ifdef CONFIG_OMAP1610" was added by commit 6f21347d more than
ten years ago. In those days, the divide-and-round was not used.
I guess that is why this weird code was added here.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Tom Rini <trini@ti.com>
Cc: Rishi Bhattacharya <rishi@ti.com>

Cleanup bootp code by using mdelay.
Signed-off-by: NPavel Machek <pavel@denx.de>
Acked-by: NMarek Vasut <marex@denx.de>

For the same reason as in commit 50c8d66d, all the remaining
CONFIG_SYS_NAND_PAGE_SIZE in common/spl/spl_nand.c can be replaced
with sizeof(*header).
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Tim Harvey <tharvey@gateworks.com>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>

If filename is passed instead of address to ext2load or fatload,
u-boot silently accepts that, and uses 0 for load address and default
filename from environment. That is confusing, display help instead.
Signed-off-by: NPavel Machek <pavel@denx.de>

Fix help text of ext2load and fatload to match code in fs/fs.c
Signed-off-by: NPavel Machek <pavel@denx.de>
Reviewed-by: NMarek Vasut <marex@denx.de>

genimg_print_time uses time_t, but time.h is never included.
Linux gets away with this since types.h includes time.h.
Explicitly include the header file so building on e.g. FreeBSD
also works.

cc: Tom Rini <trini@ti.com>
Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>

upper_32_bits() and lower_32_bits() have been ported into linux/compat.h.
Start use them now in drivers/usb/host/xhci.h.
Signed-off-by: NLijun Pan <Lijun.Pan@freescale.com>

[backport from linux commit 204b885e and 218e180e7]
64 bit processors are becomming more and more popular.
lower_32_bits and upper_32_bits save our labor doing
shifts/manipulations like (u32)(n) and (u32)((n) >> 32).
They are good helpers in both little and big endian cases.
Port these two functions here from Linux:include/linux/kernel.h,
cater the comment message to little/big endian cases.
Later on, developers could include linux/compat.h if they want to
use these two functions.
Signed-off-by: NLijun Pan <Lijun.Pan@freescale.com>

There is only one line diff between LEON2 and LEON3 linker scripts:

  -             arch/sparc/cpu/leon2/start.o (.text)
  +             arch/sparc/cpu/leon3/start.o (.text)

They can be written in the same way:

                */start.o (.text)

So, board/gaisler/grsim_leon2/u-boot.lds
and arch/sparc/cpu/leon3/u-boot.lds
can be merged into arch/sparc/cpu/u-boot.lds.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Daniel Hellstrom <daniel@gaisler.com>

The linker scripts of LEON3

 - board/gaisler/grsim/u-boot.lds
 - board/gaisler/gr_cpci_ax2000/u-boot.lds
 - board/gaisler/gr_ep2s60/u-boot.lds
 - board/gaisler/gr_xc3s_1500/u-boot.lds

are the same (except cosmetic differences such as indentation).

This commit merges them into arch/sparc/cpu/leon3/u-boot.lds.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Daniel Hellstrom <daniel@gaisler.com>

Rather than calling do_source directly (which is not officially exported
from cmd_source.c) call 'source' which is exported and requires a little
less code to do so as well.
Signed-off-by: NTom Rini <trini@ti.com>

The and operator implicitly upcasts the value to
int, hence the format should expect an int type
as well. (and make checkpatch happy)
Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>

Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>

While at it add fdt_support.h as well.

cc: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>

Add missing prototypes for global functions and
make local functions static.

cc: panto@antoniou-consulting.com
Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>

Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>

Current code uses the preprocessor to change an else case
to a statement without any if condition at all. Although
this works, change the optional code to return early, so
all optional code is contained within a single #ifdef.
Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>

Remove self assignments which is just dead code to prevent
compiler warnings about non used arguments. For u-boot this
does not prevent any warning though, on the contrary it actual
introduces warnings when compiling with clang. Remove them.
Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>