When crc32 is handled by the hash library, it requires the data to be in
big-endian format, since it reads it byte-wise. Thus at present the 'crc32'
command reports incorrect data. For example, previously we might see:

Peach # crc32 40000000 100
CRC32 for 40000000 ... 400000ff ==> 0d968558

but instead with the hash library we see:

Peach # crc32 40000000 100
CRC32 for 40000000 ... 400000ff ==> 5885960d

Correct this.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NVadim Bendebury <vbendeb@google.com>

The git config parameter log.decorate is quite useful when working with git.
Patman, however can not handle the decorated output when parsing the commit.
To prevent this use the '--no-decorate' switch for git-log.
Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
Acked-by: NSimon Glass <sjg@chromium.org>

Quick manual fixup to merge the USB boot related defines and TPM related
defines.

Conflicts:
	include/configs/exynos5250-dt.h
Signed-off-by: NTom Rini <trini@ti.com>

When building host utilities, we include libfdt.h from the host, not from
U-Boot. This in turn brings in libfdt_env.h from the host, which can mess
up the types and cause a build failure, depending on the host environment.
To fix this, force inclusion of U-Boot's libfdt_env.h so that the types
are correct.

Another way to fix this is to use -nostdinc and -idirafter to ensure that
system includes are included after U-Boot ones. Unfortunately this means
that U-Boot's errno.h gets included instead of the system one. This in
turn requires a hack to errno.h to redirect things, so all in all the
solution in this patch is probably cleaner.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Support to check whether the SD3.0 or not.
Signed-off-by: NJaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Tested-by: NRommel Custodio <sessyargc@gmail.com>

eMMC vesrion is supported up to v4.5.
But bootloader isn't saw the exact eMMC version.
After applied this patch,
if use the mmcinfo command, then can see the exactly mmc version.
Signed-off-by: NJaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Acked-by: NRommel Custodio <sessyargc@gmail.com>

In common/cmd_nvedit.c, en env_print(), the wrong type is used for len.
hexport_r() returns -1 on error (like OOM), which is converted to
0xffffffff when put in an unsigned. Said value is obviously bigger then
0, and as a result an uninitialized string is then displayed. Other
usages of hexport_r() in the code correctly uses ssize_t to keep its
return value.
Signed-off-by: NMaxime Larocque <maxmtl2002@yahoo.ca>

Snow is missing a TMU node, and with TMU support this is not allowed, so it
fails to boot. Add it.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>

The current code is causing errors like this on my toolchains:

/usr/x86_64-pc-linux-gnu/armv7a-cros-linux-gnueabi/binutils-bin/2.22/
ld.bfd.real: failed to merge target specific data of file /usr/lib/gcc/
armv7a-cros-linux-gnueabi/4.7.x-google/libgcc.a(_divdi3.o)

Use do_div() to avoid this.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>

Exynos5250 supports secondary USB device boot mode. If the iROM fails
to download u-boot from the primary boot device (such as SD or eMMC),
it will try to retrieve from the secondary boot device (such as USB).
Signed-off-by: NNaveen Krishna Ch <ch.naveen@samsung.com>
Signed-off-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NVivek Gautam <gautam.vivek@samsung.com>
Acked-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>

Since the ICH SPI controller uses PCI, we must ensure that PCI is available
before it is inited.

This fixes the current "ICH SPI: Cannot find device" message on boot.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Currently x86 has its own means of managing the global data and board data
(bd_t), and this code resides in start.S. With generic board, we need to
ensure that we leave this alone - i.e. don't clear it as we do on other
archs.

This fixes a problem where the memory init data is cleared which causes
the video driver to operate very slowly.
Signed-off-by: NSimon Glass <sjg@chromium.org>

The intention of the memory init code is that it should work the same with
CONFIG_SYS_GENERIC_BOARD and without. This is tricky because dram_init()
is called prior to relocation with generic board (matching other archs)
and after relocation without generic board.

Adjust the init sequence so that dram_init() is not called in the generic
board case, which seems like the easiest fix for now. Also ensure that
relocation addresses are still calculated.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Beaver is a Tegra30 board that is nearly 100% compatible w/Cardhu.
Add a Beaver build so it can begin to be differentiated, if need be.
Signed-off-by: NTom Warren <twarren@nvidia.com>
Reviewed-by: NStephen Warren <swarren@nvidia.com>

As suggested by Stephen Warren, use tegra_get_chip() to return
the pure CHIPID for a Tegra SoC (i.e. 0x20 for Tegra20, 0x30 for
Tegra30, etc.) and rename tegra_get_chip_type() to reflect its true
function, i.e. tegra_get_chip_sku(), which returns an ID like
TEGRA_SOC_T25, TEGRA_SOC_T33, etc.
Signed-off-by: NTom Warren <twarren@nvidia.com>
Reviewed-by: NStephen Warren <swarren@nvidia.com>

A comparison of registers between our internal NV U-Boot and
u-boot-tegra/next showed some discrepancies in the MSELECT
clock divisor programming. T20 doesn't have a MSELECT clk src reg.
Signed-off-by: NTom Warren <twarren@nvidia.com>
Reviewed-by: NStephen Warren <swarren@nvidia.com>

T114 needs the SYSCTR0 counter initialized so the TSC can be
read by the kernel. Do it in the bootloader since it's a write-once
deal (secure/non-secure mode dependent).
Signed-off-by: NTom Warren <twarren@nvidia.com>
Reviewed-by: NStephen Warren <swarren@nvidia.com>

Without this change, kernel fails at calling function cache_clean_flush
during kernel early boot.

Aprocryphally, intended for T114 only, so I check for a T114 SoC.
Works (i.e. dalmore 3.8 kernel now starts printing to console).
Signed-off-by: NTom Warren <twarren@nvidia.com>

Boot script support brings TEC in line with other Tegra boards. To
enable booting a Linux kernel with initial ramdisk, also include support
for the new FIT image type.
Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: NTom Warren <twarren@nvidia.com>
Reviewed-by: NStephen Warren <swarren@nvidia.com>

Boot script support brings Plutux in line with other Tegra boards. In
order to enable booting a Linux kernel with initial ramdisk, also add
support for the new FIT image type.
Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: NTom Warren <twarren@nvidia.com>
Reviewed-by: NStephen Warren <swarren@nvidia.com>

Boot script support brings Medcom-Wide in line with other Tegra boards.
In order to enable booting a Linux kernel with initial ramdisk, also add
support for the new FIT image type.
Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: NTom Warren <twarren@nvidia.com>
Reviewed-by: NStephen Warren <swarren@nvidia.com>

Move the nand-controller node to the tegra20-tamonten.dtsi so that it
can be shared between all derived boards.
Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: NTom Warren <twarren@nvidia.com>
Reviewed-by: NStephen Warren <swarren@nvidia.com>

A start vector fix was added by AneeshV for OMAP4 (commit 0d479b53),
and caused the old monilithic Tegra builds to hang due to an undefined
instruction trap. Previously, the code needed to run on both the
AVP (ARM7TDI) and A9, and the AVP doesn't have a CP15 register.
I corrected this in commit 6d6c0bae w/#ifndef CONFIG_TEGRA, but
now that we use SPL, and boot the AVP w/o any ARMv7 code, I can
revert my change, and make Aneesh's change apply to Tegra.
Signed-off-by: NTom Warren <twarren@nvidia.com>

Some 3rd-party flash tools use the -v (verify) option of crc32 command.
Signed-off-by: NTom Warren <twarren@nvidia.com>
Acked-by: NSimon Glass <sjg@chromium.org>

Make U-Boot aware of the T33 SKU of Tegra30, and treat it identically
to any other Tegra30.

An alternative would be to simply remove the SKU checking from
tegra_get_chip_type(); most use of the value most likely simply wants
to know the current chip, not the specific SKU. Or, the function could
be split into separate tegra_get_chip() and tegra_get_sku() for the
cases where differentiation really is required.

I wonder whether tegra_get_chip_type() should printf() whenever any
unkown chip/SKU is found, although perhaps the function is called so
early that the printf() wouldn't actually make it to the UART anyway.
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NTom Warren <twarren@nvidia.com>
Acked-by: NSimon Glass <sjg@chromium.org>

The KVM and Xen hypervisors for the Cortex-A15 virtualization
implementation need to be entered in HYP mode. Should the primary
board firmware already enter HYP mode (Calxeda firmware does that),
we should not deliberately drop back to SVC mode.
Since U-boot does not use the MMU, running in HYP mode is just fine.
Signed-off-by: NAndre Przywara <andre.przywara@linaro.org>

Signed-off-by: NTom Rini <trini@ti.com>

Signed-off-by: NAlbert ARIBAUD <albert.u.boot@aribaud.net>

This target wants to check full SPL size, BSS included.
Remove CONFIG_SPL_MAX_SIZE definition and instead define
CONFIG_SPL_MAX_FOOTPRINT.
Signed-off-by: NAlbert ARIBAUD <albert.u.boot@aribaud.net>

This target wants to check full SPL size, BSS included.
Remove CONFIG_SPL_MAX_SIZE definition and instead define
CONFIG_SPL_MAX_FOOTPRINT.
Signed-off-by: NAlbert ARIBAUD <albert.u.boot@aribaud.net>

This target wants to check full SPL size, BSS included.
Remove CONFIG_SPL_MAX_SIZE definition and instead define
CONFIG_SPL_MAX_FOOTPRINT.
Signed-off-by: NAlbert ARIBAUD <albert.u.boot@aribaud.net>

Remove SPL-related ASSERT() in arch/arm/cpu/u-boot.lds
as this file is never used for SPL builds.

Rewrite the ASSERT() in arch/arm/cpu/u-boot-spl.lds
to separately test image (text,data,rodata...) size,
BSS size, and full footprint each against its own max,
and make Tegra boards check full footprint.

Also, output section mmutable is not used in SPL builds.
Remove it.

Finally, update README regarding the (now homogeneous)
semantics of CONFIG_SPL_[BSS_]MAX_SIZE and add the new
CONFIG_SPL_MAX_FOOTPRINT macro.
Signed-off-by: NAlbert ARIBAUD <albert.u.boot@aribaud.net>
Reported-by: NBenoît Thébaudeau <benoit.thebaudeau@advansee.com>

Rework the waiting for transfer completion loop condition
to continue waiting until both Transfer Complete and DMA End
interrupts occur. Checking of DLA bit in Present State register
looks not needed in addition to interrupts status checking,
so it can be removed from the condition. Also, DMA Error
condition is added to the list of data errors, checked in the loop.
Signed-off-by: NAndrew Gabbasov <andrew_gabbasov@mentor.com>

The cache should invalidate the read buffer for
the SD card interface after the transfer complete,
not command-complete.
Tested-by: NAndrew Gabbasov <Andrew_Gabbasov@mentor.com>
Signed-off-by: NEric Nelson <eric.nelson@boundarydevices.com>