- 08 8月, 2020 3 次提交
-
-
由 Tom Rini 提交于
This converts the following to Kconfig: CONFIG_SYS_MMC_ENV_DEV CONFIG_SYS_MMC_ENV_PART Note that with this conversion we now have consistent behavior with respect to ensuring that we have always selected the correct MMC device and hardware partition. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Joao Marcos Costa 提交于
Add Python scripts to test 'ls' and 'load' commands. The scripts generate a SquashFS image and clean the directory after the assertions, or if an exception is raised. Signed-off-by: NJoao Marcos Costa <joaomarcos.costa@bootlin.com>
-
由 Simon Glass 提交于
Add various fixes and improvements to this command that were missed in the original version. Unfortunately I forgot to send v2. - Fix Kconfig name - Use a separate variable for the remaining search length - Correct a minor bug - Move into a separate test suite - Add -q flag to the 'quiet' test to test operation when console is enabled - Enable the feature for sandbox Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 06 8月, 2020 4 次提交
-
-
由 Luka Kovacic 提交于
Update the MikroTik CRS305-1G-4S flash layout to support redundant UBI partitions. Additionally enable the UBI commands in crs305-1g-4s_defconfig. Signed-off-by: NLuka Kovacic <luka.kovacic@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Jakov Petrina <jakov.petrina@sartura.hr> Reviewed-by: NStefan Roese <sr@denx.de>
-
由 Luka Kovacic 提交于
MikroTik CRS328-4C-20S-4S board has a switch chip with an integrated Marvell Prestera 98DX3236 CPU. This commit includes two board variants, namely the factory default one and a Bit variant. The Bit board variant has a bigger Macronix flash. Add basic U-Boot, UART and SPI flash support. Signed-off-by: NLuka Kovacic <luka.kovacic@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Jakov Petrina <jakov.petrina@sartura.hr> Reviewed-by: NStefan Roese <sr@denx.de>
-
由 Luka Kovacic 提交于
MikroTik CRS326-24G-2S board has a switch chip with an integrated Marvell Prestera 98DX3236 CPU. This commit includes two board variants, namely the factory default one and a Bit variant. The Bit board variant has a bigger Macronix flash. Add basic U-Boot, UART and SPI flash support. Signed-off-by: NLuka Kovacic <luka.kovacic@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Jakov Petrina <jakov.petrina@sartura.hr> Reviewed-by: NStefan Roese <sr@denx.de>
-
由 Luka Kovacic 提交于
MikroTik CRS305-1G-4S Bit board has a switch chip with an integrated Marvell Prestera 98DX3236 CPU. The Bit board variant is added, which has a bigger Macronix flash. Add basic U-Boot, UART and Winbond SPI flash support. Signed-off-by: NLuka Kovacic <luka.kovacic@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Jakov Petrina <jakov.petrina@sartura.hr> Reviewed-by: NStefan Roese <sr@denx.de>
-
- 05 8月, 2020 1 次提交
-
-
由 Jonas Smedegaard 提交于
This commit moves CONFIG_PREBOOT="usb start" to common/KConfig for all boards also declaring USB_KEYBOARD. Besides simplifying defconfig files, this also enables support for board-specific CONFIG_PREBOOT for sunxi boards: commit 37304aaf ("Convert CONFIG_USE_PREBOOT and CONFIG_PREBOOT to Kconfig") intended to support CONFIG_PREBOOT, but include/configs/sunxi-common.h hardcodes preboot as part of internally defined CONSOLE_STDIN_SETTINGS, silently ignoring any board-specific CONFIG_PREBOOT. Signed-off-by: NJonas Smedegaard <dr@jones.dk> Reviewed-by: NNeil Armstrong <narmstrong@baylibre.com> Series-Cc: Jagan Teki <jagan@amarulasolutions.com> Series-Cc: Lukasz Majewski <lukma@denx.de> Series-Cc: Andre Przywara <andre.przywara@arm.com>
-
- 04 8月, 2020 3 次提交
-
-
由 Sagar Shrikant Kadam 提交于
Add necessary defconfig and Kconfig entries to enable SiFive SoC's reset driver so as to utilise U-Boot's reset framework. Signed-off-by: NSagar Shrikant Kadam <sagar.kadam@sifive.com> Reviewed-by: NPragnesh Patel <Pragnesh.patel@sifive.com> Reviewed-by: NBin Meng <bin.meng@windriver.com> Tested-by: NBin Meng <bin.meng@windriver.com>
-
由 Soeren Moch 提交于
Migration to DM_VIDEO changed the output device name (in stout, stderr) from 'vga' to 'vidconsole'. This also was adapted in the default environment. However, existing user defined environments still use 'vga'. Enable this workaround to map the 'vga' name to 'vidconsole'. So we get HDMI video output also with existing legacy environments. Signed-off-by: NSoeren Moch <smoch@web.de>
-
由 Stefan Roese 提交于
This patch enables the following options for the Octeon EBB7304 EVB: - PCI & DM_PCI - DM_SPI_FLASH & SPI flash device support - SPI & Octeon SPI driver - GPIO cmd support - I2C cmd support Signed-off-by: NStefan Roese <sr@denx.de>
-
- 03 8月, 2020 5 次提交
-
-
由 Wig Cheng 提交于
Before enable _DM_ETH: Net: FEC [PRIME] After enable DM_ETH: Net: eth0: ethernet@2188000 Here is the test commands: => dhcp BOOTP broadcast 1 DHCP client bound to address 10.88.88.152 (146 ms) *** ERROR: `serverip' not set Cannot autoload with TFTPGET => ping 8.8.8.8 Using ethernet@2188000 device host 8.8.8.8 is alive Signed-off-by: NWig Cheng <wig.cheng@technexion.com>
-
由 Niel Fourie 提交于
Enable CONFIG_SPL_DM_SPI_FLASH to be able to boot from SPI NOR, modify the offset of U-boot proper in the SPI NOR, so the difference in offset matches between SPL and U-boot matches that of the SD Card, allowing u-boot-with-spl.imx to also be copied to SPI NOR at an offset of 0x400. Update the README to reflect this change. Signed-off-by: NNiel Fourie <lusus@denx.de> Cc: Stefano Babic <sbabic@denx.de>
-
由 Parthiban Nallathambi 提交于
MYS-6ULX is single board computer (SBC) comes with eMMC or NAND based on imx6ULL SoC from NXP and provision for expansion board. This commit adds support only for SBC with NAND. CPU: Freescale i.MX6ULL rev1.1 528 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C) at 45C Reset cause: WDOG Model: MYiR i.MX6ULL MYS-6ULX Single Board Computer with NAND Board: MYiR MYS-6ULX 6ULL Single Board Computer DRAM: 256 MiB NAND: 256 MiB MMC: FSL_SDHC: 0 In: serial@2020000 Out: serial@2020000 Err: serial@2020000 Net: FEC0 Working: - Eth0 - MMC/SD - NAND - UART 1 - USB host Signed-off-by: NParthiban Nallathambi <parthiban@linumiz.com>
-
由 Marek Vasut 提交于
Enable these extra PCI ethernet devices, so they can be tested in CI. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
Switch r2dplus to DM and DT probing for serial and clock. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
- 02 8月, 2020 3 次提交
-
-
由 Marek Vasut 提交于
The ethernet on r2dplus is on PCI bus, enumerate the PCI early to get the ethernet operational. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
Enable DM ethernet support for the board, now that rtl8139 is converted. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Walter Lozano 提交于
As both MMC and GPIO driver now supports OF_PLATDATA, enable it in defconfig in order to reduce the SPL footprint. After applying this setting the SPL reduction is 5 KB, which partially compensates the increment due to DM. Signed-off-by: NWalter Lozano <walter.lozano@collabora.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
- 01 8月, 2020 1 次提交
-
-
由 Heinrich Schuchardt 提交于
The K210 has only 8 MiB RAM thereof 2 MiB reserved for AI. Allow only 1 MiB for the stack. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
- 31 7月, 2020 3 次提交
-
-
由 Patrick Delaunay 提交于
Add test for the erase command tested on ENV in EXT4. Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrick Delaunay 提交于
Add support of environment location with the new env command: 'env select' and 'env load' The ENV backend is selected by priority order - 0 = "nowhere" (default at boot) - 1 = "EXT4" To test EXT4 env support, this backend is selected by name: > env select EXT4 Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrick Delaunay 提交于
Activate ENV in EXT4 support in sandbox. The sandbox behavior don't change; the default environment with the nowhere backend (CONFIG_ENV_IS_NOWHERE)is still used: the weak function env_get_location() return ENVL_NOWHERE for priority 0. Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
- 29 7月, 2020 17 次提交
-
-
由 Rayagonda Kokatanur 提交于
Enable tee and optee drivers. Signed-off-by: NVikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: NRayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Rayagonda Kokatanur 提交于
Enable FIT config for NS3. Signed-off-by: NRayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Rayagonda Kokatanur 提交于
Enable sp805 watchdog driver for ns3. Signed-off-by: NRayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Rayagonda Kokatanur 提交于
Enable EXT4 and FAT fs support for ns3. Signed-off-by: NRayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Rayagonda Kokatanur 提交于
Enable gpt commands for ns3. Signed-off-by: NRayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Rayagonda Kokatanur 提交于
Enable mmc commands for NS3. Signed-off-by: NRayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Rayagonda Kokatanur 提交于
Enable BCM IPROC mmc driver ns3. Enable DMA for MMC Host to have better reads and writes. Signed-off-by: NRayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Rayagonda Kokatanur 提交于
Enable pinctrl driver for ns3. Signed-off-by: NRayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Rayagonda Kokatanur 提交于
Add both DRAM banks memory information and the corresponding MMU page table mappings. Signed-off-by: NBharat Kumar Reddy Gooty <bharat.gooty@broadcom.com> Signed-off-by: NRayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Rayagonda Kokatanur 提交于
Enables the Generic Interrupt Controller (GIC) V3 Interrupt Translation Service (ITS) Locality-specific Peripheral Interrupts (LPI) configuration table and LPI table. Signed-off-by: NRayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Signed-off-by: NBharat Kumar Reddy Gooty <bharat.gooty@broadcom.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Rayagonda Kokatanur 提交于
Enable clock subsystem for ns3. Signed-off-by: NRayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Rayagonda Kokatanur 提交于
Add support for Broadcom Northstar 3 SoC. NS3 is a octo-core 64-bit ARMv8 Cortex-A72 processors targeting a broad range of networking applications. Signed-off-by: NRayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 David Woodhouse 提交于
This is an MT7623A-based board, very similar to the Banana Pi R2. http://www.unielecinc.com/q/news/cn/p/product/detail.html?qd_guid=OjXwKCaRlNSigned-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 David Woodhouse 提交于
Rather than hard-coding it to the Banana Pi R2. Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Stefan Bosch 提交于
Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01: - Configuration changed, mainly several "CONFIG_..." moved from s5p4418_nanopi2.h to s5p4418_nanopi2_defconfig and USB related configs removed because USB is not supported yet. - s5p4418_nanopi2.h: "CONFIG_" removed from several s5p4418/nanopi2 specific defines because the appropriate values do not need to be configurable. - pinctrl is supported now, therefore "CONFIG_PINCTRL=y" added to s5p4418_nanopi2_defconfig. Signed-off-by: NStefan Bosch <stefan_b@posteo.net>
-
由 Ard Biesheuvel 提交于
The QEMU/mach-virt targeted port of u-boot currently only runs on QEMU under TCG emulation, which does not model the caches at all, and so no users can exist that are relying on the GRUB hack for EFI boot. We will shortly enable support for running under KVM, but the GRUB hack (which disables all caches without doing cache cleaning by VA during ExitBootServices()) is likely to cause more problems than it solves, given that KVM hosts require correct maintenance if they incorporate non-architected system caches. So let's disable the GRUB hack by default on the QEMU/mach-virt port. Signed-off-by: NArd Biesheuvel <ardb@kernel.org> Reviewed-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Ard Biesheuvel 提交于
QEMU's mach-virt machine only supports selecting CPU models that implement the virtualization extensions, and are therefore guaranteed to support LPAE as well. Initially, QEMU would not allow emulating these CPUs running in HYP mode (or EL2, for AArch64), but today, it also contains a complete implementation of the virtualization extensions themselves. This means we could be running U-Boot in HYP mode, in which case the LPAE long descriptor page table format is the only format that is supported. If we are not running in HYP mode, we can use either. So let's enable CONFIG_ARMV7_LPAE for qemu_arm_defconfig so that we get the best support for running with the MMU and caches enabled at any privilege level. Signed-off-by: NArd Biesheuvel <ardb@kernel.org> Acked-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-