- 01 6月, 2015 2 次提交
-
-
由 Joe Hershberger 提交于
Another shell scripting command that has not been moved. Moved using tools/moveconfig.py using these settings: CMD_SETEXPR bool n y Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
Commit 76ec988b (net: Remove all calls to net_random_ethaddr()) accidentally deleted CONFIG_TARGET_BCT_BRETTL2=y, and since then bct-brettl2 would not build. Since commit a26cd049 (arch: Make board selection choices optional), Kconfig actually allows such a .config file in which no board is selected, but the build never succeeds. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
- 26 5月, 2015 1 次提交
-
-
由 Heiko Schocher 提交于
add support for imx6dl based aristainetos2 board U-Boot 2015.04-rc5-00066-g60f6ed4 (Apr 10 2015 - 08:46:27) CPU: Freescale i.MX6DL rev1.1 at 792 MHz Reset cause: WDOG Board: aristaitenos2 Watchdog enabled I2C: ready DRAM: 1 GiB NAND: 1024 MiB MMC: FSL_SDHC: 0 SF: Detected N25Q128A with page size 256 Bytes, erase size 64 KiB, total 16 MiB Display: lg4573 (480x800) In: serial Out: serial Err: serial Net: FEC [PRIME] Hit any key to stop autoboot: 0 => Signed-off-by: NHeiko Schocher <hs@denx.de>
-
- 25 5月, 2015 2 次提交
-
-
由 Masahiro Yamada 提交于
Prior to this commit, ZC702 and ZC706 shared the same configuration and were built as follows: ZC702: make zynq_zc70x_defconfig && make ZC706: make zynq_zc70x_defconfig && make DEVICE_TREE=zynq-zc706 This commit introduces separate configuration for them, which makes the next commit much easier. Going forward, the recommended build commands are: ZC702: make zynq_zc702_defconfig && make ZC706: make zynq_zc706_defconfig && make Although the old work flow is still supported, CONFIG_TARGET_ZC70X has been marked as deprecated. If used, the warning message is shown to prompt users to switch to the new scheme. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Stefan Agner 提交于
This commit allows users to enable/disable the Freescale NFC controller found in systems like Vybrid (VF610), MPC5125, MCF54418 or Kinetis K70 via Kconfig with more detailed help docs. Signed-off-by: NStefan Agner <stefan@agner.ch> Acked-by: NStefano Babic <sbabic@denx.de> [scottwood: updated vf610twr_nand_defconfig] Signed-off-by: NScott Wood <scottwood@freescale.com>
-
- 22 5月, 2015 1 次提交
-
-
由 Fabio Estevam 提交于
Currently we need to build one U-boot image for each of the wandboard variants: quad, dual-lite and solo. By switching to SPL we can support all these variants with a single binary, which is very convenient. Based on the work from Richard Hu. Tested kernel booting on the three boards. Signed-off-by: NRichard Hu <hakahu@gmail.com> Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Tested-by: NVagrant Cascadian <vagrant@aikidev.net> Reviewed-by: NStefano Babic <sbabic@denx.de>
-
- 21 5月, 2015 7 次提交
-
-
由 Joe Hershberger 提交于
Enable the new env unit tests on sandbox. Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Joe Hershberger 提交于
Make all unit tests selectable as a menu of test suites instead of just sitting in the top-level menu individually. Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Joe Hershberger 提交于
Unify the command for running unit tests further by moving the "ut_time" command over to "ut time". Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
-
由 Joe Hershberger 提交于
Unify the command for running unit tests further by moving the "dm test" command over to "ut dm". Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Joe Hershberger 提交于
Stop using the sandbox arch Kconfig to override defaults for config options. This is a bit of abuse and may be causing build problems. Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
-
由 Joe Hershberger 提交于
The defconfigs should not be edited directly. They should be generated by editing the .config (through menuconfig or whatever) and then run make savedefconfig to have the Kconfig system generate a clean defconfig I did this for sandbox here with no actual changes. Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Joe Hershberger 提交于
Remove the calls to net_random_ethaddr() that some boards and some drivers are calling. This is now implemented inside of net/eth.c Enable the feature for all boards that previously enabled it. Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com> Acked-By: Michael Walle <michael@walle.cc> (for the lsxl board part) Series-changes: 2 -Fixed bfin build errors
-
- 20 5月, 2015 1 次提交
-
-
由 Hans de Goede 提交于
The ga10h is an 10" tablet with an A33 or A23 soc, 1G RAM, 8G or 16G nand, sdio wifi, 2 micro usb ports, 1 otg and 1 host and 1 micro sd slot. This commit adds a defconfig for the v1.1 pcb with an a33 soc. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Acked-by: NIan Campbell <ijc@hellion.org.uk>
-
- 19 5月, 2015 2 次提交
-
-
由 Nikolay Dimitrov 提交于
Signed-off-by: NNikolay Dimitrov <picmaster@mail.bg>
-
由 Nikolay Dimitrov 提交于
Signed-off-by: NNikolay Dimitrov <picmaster@mail.bg>
-
- 16 5月, 2015 2 次提交
-
-
由 Tim Harvey 提交于
Certain features we desire require a larger stack than is available by using iRAM (most notably for us, env_mmc). Relocate the stack to DRAM so that we can use these features. Signed-off-by: NTim Harvey <tharvey@gateworks.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Fabio Estevam 提交于
Hummingboard dual, dual-lite and solo are now supported via SPL mechanism. Remove the previous hummingboard support, which does not use SPL and supported only the solo variant. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
- 15 5月, 2015 2 次提交
-
-
由 Przemyslaw Marczak 提交于
This commit enables: - emulated i2c PMIC driver - sandbox PMIC I/O driver - sandbox PMIC's regulator driver Signed-off-by: NPrzemyslaw Marczak <p.marczak@samsung.com> Acked-by: NSimon Glass <sjg@chromium.org> Tested on sandbox: Tested-by: NSimon Glass <sjg@chromium.org>
-
由 Przemyslaw Marczak 提交于
This change enables the configs required to init and setup max77686 regulator driver, using the new driver model pmic and regulator API. And also changes the old pmic framework calls to the new ones. This commits enables: - CONFIG_ERRNO_STR - CONFIG_DM_PMIC - CONFIG_DM_PMIC_CMD - CONFIG_DM_PMIC_MAX77686 - CONFIG_DM_REGULATOR - CONFIG_DM_REGULATOR_CMD - CONFIG_DM_REGULATOR_MAX77686 And removes the unused: - CONFIG_DM_I2C_COMPAT - CONFIG_POWER - CONFIG_POWER_I2C - CONFIG_POWER_MAX77686 Signed-off-by: NPrzemyslaw Marczak <p.marczak@samsung.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
- 14 5月, 2015 1 次提交
-
-
由 Simon Glass 提交于
Add the PMIC, LCD settings, PWM and also show the board info at the top of the LCD when starting up. Signed-off-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
- 13 5月, 2015 2 次提交
-
-
由 Masahiro Yamada 提交于
Remove board support for afeb9260, tny_a9260, and sbc35_a9g20. They have not been converted into Generic Board yet. See doc/README.generic-board for details. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Cc: Sergey Lapin <slapin@ossfans.org> Cc: Albin Tonnerre <albin.tonnerre@free-electrons.com> Cc: Andreas Bießmann <andreas.devel@googlemail.com>
-
由 Joe Hershberger 提交于
In order to reduce merge conflicts and to maintain the simplest possible defconfig files, we should be using the savedefconfig feature of Kconfig every time a new feature is added. This keeps the defconfig settings to a minimum (only those things not default) and keeps them in the same order as the Kconfig options. Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: NStephen Warren <swarren@wwwdotorg.org> Cc: Tom Rini <trini@konsulko.com>
-
- 10 5月, 2015 4 次提交
-
-
由 Joe Hershberger 提交于
Having this as a Kconfig allows it to be a dependent feature. Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Stefan Roese 提交于
As this board seems to be unmaintained for quite some time, and its not moved to the generic board ingrastructure, lets remove it. This will also enable us to remove the CONFIG_AUTOBOOT_DELAY_STR2 and CONFIG_AUTOBOOT_STOP_STR2 macros, as this sc3 board is the only one using one of this macros. A removal patch will follow soon. Signed-off-by: NStefan Roese <sr@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Juergen Beisert <jbeisert@eurodsn.de> Acked-by: NHeiko Schocher <hs@denx.de>
-
由 Vikas Manocha 提交于
This patch adds device tree for the ST Micro stv0991 board & enables device tree control. Progressively device tree support for the drivers being used will also be added. Signed-off-by: NVikas Manocha <vikas.manocha@st.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Peter Howard 提交于
Signed-off-by: NPeter Howard <phoward@gme.net.au>
-
- 07 5月, 2015 2 次提交
-
-
由 Masahiro Yamada 提交于
Switch to a more standard way of board select; put the SoC select into arch/arm/Kconfig and move the board select menu under arch/arm/mach-socfpga/Kconfig. Also, consolidate SYS_BOARD, SYS_VENDOR, SYS_SOC, SYS_CONFIG_NAME. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Simon Glass 提交于
Enable this command for sandbox. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 06 5月, 2015 1 次提交
-
-
由 Simon Glass 提交于
Enable real-time-clock support in sandbox. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 05 5月, 2015 6 次提交
-
-
由 Stefan Roese 提交于
This patch adds support for the Marvell DB-88F6820-GP Armada A38x evaluation board. Supported peripherals are: - UART - Ethernet (mvneta) - I2C - SPI (including SPI NOR flash) Please note that this board support right now only supports the main U-Boot. Without the bin_hdr integration (DDR training etc). This will be added in a few days / weeks to complete this board port. But till then this U-Boot version can be run on the target via the original Marvell U-Boot via this command: tftpboot 4000000 db-88f6820-gp/u-boot.bin;go 4000000 Signed-off-by: NStefan Roese <sr@denx.de> Tested-by: NKevin Smith <kevin.smith@elecsyscorp.com> Tested-by: NDirk Eibach <dirk.eibach@gdsys.cc>
-
由 Oleksandr G Zhadan 提交于
New QorIQ p1020 based board support from Arcturus Networks Inc. http://www.arcturusnetworks.com/products/ucp1020/Signed-off-by: NMichael Durrant <mdurrant@arcturusnetworks.com> Signed-off-by: NOleksandr G Zhadan <oleks@arcturusnetworks.com> [York Sun: remove patman tags from commit message] Reviewed-by: NYork Sun <yorksun@freescale.com>
-
由 Shaohui Xie 提交于
1. board/freescale/t4qds/t4_rcw.cfg 1.8GHz support is requested as default frequency, so update the rcw. 2. remove un-used configs configs/T4160QDS_SPIFLASH_defconfig configs/T4240QDS_SPIFLASH_defconfig SPI boot is not available on T4QDS, so the configs should be removed. 3. board/freescale/t4qds/MAINTAINERS Updated MAINTAINERS accordingly. Signed-off-by: NShaohui Xie <Shaohui.Xie@freescale.com> [York Sun: revise subject] Reviewed-by: NYork Sun <yorksun@freescale.com>
-
由 Shengzhou Liu 提交于
T1023RDB is a Freescale Reference Design Board that hosts the T1023 SoC. T1023RDB board Overview ----------------------- - T1023 SoC integrating two 64-bit e5500 cores up to 1.4GHz - CoreNet fabric supporting coherent and noncoherent transactions with prioritization and bandwidth allocation - Memory: 2GB Micron MT40A512M8HX unbuffered 32-bit fixed DDR4 without ECC - Accelerator: DPAA components consist of FMan, BMan, QMan, DCE and SEC - Ethernet interfaces: - one 1G RGMII port on-board(RTL8211F PHY) - one 1G SGMII port on-board(RTL8211F PHY) - one 2.5G SGMII port on-board(AQR105 PHY) - PCIe: Two Mini-PCIe connectors on-board. - SerDes: 4 lanes up to 10.3125GHz - NOR: 128MB S29GL01GS110TFIV10 Spansion NOR Flash - NAND: 512MB S34MS04G200BFI000 Spansion NAND Flash - eSPI: 64MB S25FL512SAGMFI010 Spansion SPI flash. - USB: one Type-A USB 2.0 port with internal PHY - eSDHC: support SD/MMC card and eMMC on-board - 256Kbit M24256 I2C EEPROM - RTC: Real-time clock DS1339 on I2C bus - UART: one serial port on-board with RJ45 connector - Debugging: JTAG/COP for T1023 debugging As well updated T1024RDB to add T1023RDB. Signed-off-by: NShengzhou Liu <Shengzhou.Liu@freescale.com> [York Sun: fix defconfig files] Reviewed-by: NYork Sun <yorksun@freescale.com>
-
由 Chunhe Lan 提交于
This patch adds SD boot support for T4240RDB board. SPL framework is used. PBL initializes the internal RAM and copies SPL to it. Then SPL initializes DDR using SPD and copies u-boot from SD card to DDR, finally SPL transfers control to u-boot. Signed-off-by: NChunhe Lan <Chunhe.Lan@freescale.com> [York Sun: Fix T4240RDB_SDCARD_defcofig] Reviewed-by: NYork Sun <yorksun@freescale.com>
-
由 York Sun 提交于
T4240 SoC has been available for a long time. Emulator support is no longer needed. Signed-off-by: NYork Sun <yorksun@freescale.com>
-
- 04 5月, 2015 4 次提交
-
-
由 Hans de Goede 提交于
Now that we've everything prepared for it remove the DM settings from the defconfig(s) and simply always set them for sunxi. This makes all sunxi boards allways use the driver model for gpios and ethernet, and allows us to move over more bits to the driver-model without the need to introduce #ifdef-ery for boards which are not yet using DM. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Acked-by: NIan Campbell <ijc@hellion.org.uk>
-
由 Hans de Goede 提交于
This is a preparation patch for switching all sunxi boards over to using the driver model. Note that rather then defining both CONFIG_DEFAULT_DEVICE_TREE (for u-boot) and CONFIG_FDTFILE (for the kernel), this commit simply replaces all CONFIG_FDTFILE defconfig settings with CONFIG_DEFAULT_DEVICE_TREE and uses CONFIG_DEFAULT_DEVICE_TREE for setting the default fdtfile env value in sunxi-common.h . Signed-off-by: NHans de Goede <hdegoede@redhat.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Acked-by: NIan Campbell <ijc@hellion.org.uk>
-
由 Hans de Goede 提交于
Move the axp-gpio code out of the drivers/power/axp*.c code, and into a new separate axpi-gpio driver. This change drops supports for the gpio3 pin on the axp209, as that requires special handling, and no boards are using it. Besides cleaning things up by moving the code to a separate driver, as a bonus this change also adds support for the (non vusb) gpio pins on the axp221 and the gpio pins on the axp152. The new axp-gpio driver gets its own Kconfig option, and is only enabled on boards which need it. Besides that it only gets enabled in the regular u-boot build and not for the SPL as we never need it in the SPL. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Acked-by: NIan Campbell <ijc@hellion.org.uk>
-
由 Hans de Goede 提交于
Add a defconfig for generic 7" tablets using the Ippo q8h v1.2 pcb, with an A33 SoC (the pcb can take an A23 or an A33), and a 1024x600 LCD. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Acked-by: NIan Campbell <ijc@hellion.org.uk>
-