Turn ioaddr into an unsigned long rather than a sized 32-bit variable.
While at it, fix a couple of pointer to integer cast size mismatch
warnings by casting through unsigned long going from pointers to
integers and vice versa.

Cc: Joe Hershberger <joe.hershberger@gmail.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Acked-by: NJoe Hershberger <joe.hershberger@ni.com>

Some Realtek Ethernet PHYs, like RTL8211D(G/N) and RTL8211E(G), have
interrupts enabled by default. If the interrupt is not treated later by
the OS and the PHY's interrupt line is enabled and shared with other
interrupts, the system will get an interrupt storm. This patch disables
the interrupt for PHY devices that use one of the current Realtek
Ethernet PHY drivers. Some of Realtek Ethernet PHYs, such as RTL8211B(L)
have the interrupt masked. In this case, the functionality of the PHY
should not be afected since this patch brings INER and INSR registers to
their default values.
Signed-off-by: NCodrin Ciubotariu <codrin.ciubotariu@freescale.com>
Acked-by: NJoe Hershberger <joe.hershberger@ni.com>

Signed-off-by: NHeiko Schocher <hs@denx.de>

the ldb clock can be setup in board code (for example set through PLL5).
Update the ldb_clock rate also through board code.

This should be removed, if a clock framework is availiable.
Signed-off-by: NHeiko Schocher <hs@denx.de>
Tested-by: NEric Nelson <eric.nelson@boundarydevices.com>

make the ldb_clock configurable through the new define
CONFIG_SYS_LDB_CLOCK. This is needed as the ldb clock is not
always 650000000, for example on the aristainetos2 board,
where the ldb clock derives from PLL5 clock.
Signed-off-by: NHeiko Schocher <hs@denx.de>
Tested-by: NEric Nelson <eric.nelson@boundarydevices.com>

Make the sandbox setup more generic/examplary by including
config_distro_defaults.h and config_distro_bootcmd.h.

Among other things this makes it easy to test whether images will boot
though with the standard distro bootcmds by running e.g:
  u-boot -c 'host bind 0 myimage.img ; boot'

By default there are 2 target host devices to emulate device with
multiple storage devices (e.g. internal ("host 0") and external
("host 1") and verify that the prioritization and fallbacks do work
correctly.
Signed-off-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed by: Simon Glass <sjg@chromium.org>
Acked-by: NSimon Glass <sjg@chromium.org>

Define default PXE client architecture identifiers for IA32 (0x0 aka
Intel x86PC) and Intel x86-64 (0x9 aka EFI x86-64).

This prepares for usage for config_distro_defaults in the sandbox
architecture
Signed-off-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk>

Properly map memory through map_sysmem so that pxe can be used from the
sandbox.

Tested in sandbox as well as on jetson-tk1, odroid-xu3, snow as peach-pi
boards
Signed-off-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk>
Acked-by: NSimon Glass <sjg@chromium.org>

Define the common shared block environment for the host interface in
preperation for the sandbox build to use config_distro_bootcmd.
Signed-off-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk>
Acked-by: NSimon Glass <sjg@chromium.org>
Acked-by: NStephen Warren <swarren@nvidia.com>

A common pattern to check if a certain device exists (e.g. in
config_distro_bootcmd) is to use: <interface> dev [device]

Implement host dev [device] so this pattern can be used for sandbox host
devices.
Signed-off-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk>
Acked-by: NSimon Glass <sjg@chromium.org>

As suggested by Simon Glass, rename the sb command to host but keep the
old sb command as an alias
Signed-off-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk>
Acked-by: NSimon Glass <sjg@chromium.org>

Add dummy bootz_setup implementation allowing the u-boot sandbox to
run bootz. This recognizes both ARM and x86 zImages to validate a
valid zImage was loaded.
Signed-off-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk>
Acked-by: NSimon Glass <sjg@chromium.org>

Follow the convention of other architectures and move the platform
specific linux bootm code into sandbox/lib/bootm.c.
Signed-off-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk>
Acked-by: NSimon Glass <sjg@chromium.org>

Only do sandbox filesystem access when using the hostfs device
interface, rather then falling back to it in all cases. This prevents
confusion situations due to the fallback being taken rather then an
unsupported error being raised.
Signed-off-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: NSimon Glass <sjg@chromium.org>
Acked-by: NSimon Glass <sjg@chromium.org>

Make cover letter shows like 0/x, 00/xx and 000/xxx etc.
Signed-off-by: NJosh Wu <josh.wu@atmel.com>
Acked-by: NSimon Glass <sjg@chromium.org>

The help text for -V says we will pass V=1 but all it really did was not
pass in -s.  Change the logic to pass make V=1 with given to buildman -V or
-s to make otherwise.

Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: NTom Rini <trini@konsulko.com>
Acked-by: NSimon Glass <sjg@chromium.org>

When told to keep outputs, be much more liberal in what files we keep.
In addition to adding 'MLO', keep anything that matches u-boot-spl.* (so
that we keep the map file as well) and anything we generate about
'u-boot itself.  A large number of bootable formats now match this and
thus it's easier to build many targets and then boot them afterwards
using buildman.

Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: NTom Rini <trini@konsulko.com>
Acked-by: NSimon Glass <sjg@chromium.org>

It is useful to be able to see CONFIG changes made by commits. Add this
feature to buildman using the -K flag so that all CONFIG changes are
reported.

The CONFIG options exist in a number of files. Each is reported
individually as well as a summary that covers all files. The output
shows three parts: green for additions, red for removals and yellow for
changes.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Store all config file output so that we can compare changes if requested.
Signed-off-by: NSimon Glass <sjg@chromium.org>

At present buildman tries to detect an aborted build and doesn't record a
result in that case. This is to make sure that an abort (e.g. with Ctrl-C)
does not mark the build as done. Without this option, buildman would never
retry the build unless -f/-F are provided. The effect is that aborting the
build creates 'fake errors' on whatever builds buildman happens to be
working on at the time.

Unfortunately the current test is not reliable and this detection can
trigger if a required toolchain tool is missing. In this case the toolchain
problem is never reported.

Adjust the logic to continue processing the build result, mark the build as
done (and failed), but with a return code which indicates that it should be
retried.

The correct fix is to fully and correctly detect an aborted build, quit
buildman immediately and not write any partial build results in this case.
Unfortunately this is currently beyond my powers and is left as an exercise
for the reader (and patches are welcome).
Signed-off-by: NSimon Glass <sjg@chromium.org>

When a verbose build it selected, show the make command before the output of
that command.
Signed-off-by: NSimon Glass <sjg@chromium.org>

At present CONFIG options are split across Kconfig and board config headers
files. Also we have multiple files containing these CONFIG options.

In order to see exactly what is being used for building, create a .cfg
file which holds these options as reported by the C preprocessor.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Don't store it in a u32.

Don't dereference the bus address as if it were a virtual address
(fixes 284231e4 ("ahci: Support splitting of read transactions
into multiple chunks")).

Fixes crash on boot in MPC8641HPCN_36BIT target.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Cc: Vadim Bendebury <vbendeb@chromium.org>
Acked-by: NYork Sun <yorksun@freescale.com>

Move this over to Kconfig and tidy up.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Move this over to Kconfig and tidy up.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Move this over to Kconfig and tidy up.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Move this over to Kconfig and tidy up.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Move this over to Kconfig and tidy up.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Move this over to Kconfig and tidy up.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Move this over to Kconfig and tidy up.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Move this over to Kconfig and tidy up.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Move this over to Kconfig and tidy up.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Move this over to Kconfig and tidy up.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Move this over to Kconfig and tidy up.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Acked-by: Heiko Schocher<hs@denx.de>

Move this over to Kconfig and tidy up.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Move these over to Kconfig and tidy up.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Move CONFIG_BOOT_STAGE and its associated options to Kconfig. Adjust
existing users and code.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Switch this board over to use driver model for Ethernet.
Signed-off-by: NSimon Glass <sjg@chromium.org>