Added USB host and device config for host (MSC, Keyboard) and
device (ACM) functionalities.
Signed-off-by: NAjay Kumar Gupta <ajay.gupta@ti.com>

OMAP3EVM uses ISP1504 phy and so twl4030 related init is not required.
Submitted-by: NAjay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: NTom Rix <Tom.Rix@windriver.com>

The preferred serial output comes from the debug board.
When the debug board is disconnected, fall back on using
usbtty from the usb connector on the Zoom2 board.

This shows up as /dev/ttyACM0 in a linux host.
Signed-off-by: NTom Rix <Tom.Rix@windriver.com>

Zoom2 needs to use these declarations and the include directory is a
better place from them than in the middle of the driver directory.
It did not make sense to create a new file for just a couple of
lines so they were appended to the serial.h
Signed-off-by: NTom Rix <Tom.Rix@windriver.com>

The primary console of beagle is the serial header.

A secondary console is to use the usbtty.  The user can set this
manually by doing

setenv stdout usbtty; setenv stdin usbtty; setenv stderr usbtty
saveenv

usbtty will be usable by accessing the /dev/ttyACM0 on a linux host.
Signed-off-by: NTom Rix <Tom.Rix@windriver.com>

The primary console of zoom1 is the serial out from the jumpers
accessed by removing the back panel.

A secondary console is to use the usbtty.  The user can set this
manually by doing

setenv stdout usbtty; setenv stdin usbtty; setenv stderr usbtty
saveenv

usbtty will be usable by accessing the /dev/ttyACM0 on a linux host.
Signed-off-by: NTom Rix <Tom.Rix@windriver.com>

This change adds the usb device support for musb.

Omap3 platform support added at the same level as davinci.

The interface for usbtty to use the musb device support was added.

Verified on omap3 beagle, zoom1 and zoom2.
Signed-off-by: NTom Rix <Tom.Rix@windriver.com>

The twl4030 provides a PHY device for connecting a link device,
like musb, to physical connection.

This change adds the twl4030 usb registers and functions for
initializing the PHY as required by omap3.
Signed-off-by: NTom Rix <Tom.Rix@windriver.com>

When developing usb device features, it is useful to print out
common usb structures.
Signed-off-by: NTom Rix <Tom.Rix@windriver.com>

The header files usb.h and usbdescriptors.h have the same nameed
structure definitions for

usb_config_descriptor
usb_interface_descriptor
usb_endpoint_descriptor
usb_device_descriptor
usb_string_descriptor

These are out right duplicates in usb.h

usb_device_descriptor
usb_string_descriptor

This one has extra unused elements

usb_endpoint_descriptor

	unsigned char	bRefresh
	unsigned char	bSynchAddress;

These in usb.h have extra elements at the end of the usb 2.0
specified descriptor and are used.

usb_config_descriptor
usb_interface_descriptor

The change is to consolidate the definition of the descriptors
to usbdescriptors.h.  The dublicates in usb.h are removed.
The extra element structure will have their name shorted by
removing the '_descriptor' suffix.

So

usb_config_descriptor -> usb_config
usb_interface_descriptor -> usb_interface

For these, the common descriptor elements are accessed now
by an element 'desc'.

As an example

-	if (iface->bInterfaceClass != USB_CLASS_HUB)
+	if (iface->desc.bInterfaceClass != USB_CLASS_HUB)

This has been compile tested on MAKEALL arm, ppc and mips.
Signed-off-by: NTom Rix <Tom.Rix@windriver.com>

Signed-off-by: NWolfgang Denk <wd@denx.de>

The gd->cpu pointer is set to an address located in flash when the
probecpu() function is called while U-Boot is executing from flash.
This pointer needs to be updated to point to an address in RAM after
relocation has occurred otherwise Linux may not be able to boot due to
"fdt board" crashing if flash has been erased or changed.

This bug was introduced in commit
a0e2066f.
Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>
Reported-by: NEd Swarthout <Ed.Swarthout@freescale.com>
Tested-by: NKumar Gala <galak@kernel.crashing.org>
Tested on MPC8527DS.
Tested by: Ed Swarthout <Ed.Swarthout@freescale.com>

Neither the MVBLUE nor its underlying architecture implement the
do_irqinfo() function which is required when CONFIG_CMD_IRQ is defined.
This change fixes the following MVBLUE compiler error:

-> ./MAKEALL MVBLUE
Configuring for MVBLUE board...
common/libcommon.a(cmd_irq.o):(.u_boot_cmd+0x24): undefined reference to `do_irqinfo'
make: *** [u-boot] Error 1
Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>
Acked-by: NAndre Schwarz <andre.schwarz@matrix-vision.de>

The support for this was silently dropped by a configuration
split during the merge of the imx27lite board support in commit
864aa034 (cmd_mtdparts: Move to common
handling of FLASH devices via MTD layer).
Signed-off-by: NDetlev Zundel <dzu@denx.de>

Currently, the last block of NAND devices can't be accessed. This patch
fixes this issue by correcting the boundary checking (off-by-one error).
Signed-off-by: NStefan Roese <sr@denx.de>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Wolfgang Denk <wd@denx.de>

Commit c7190f02 (retain POR values of non-configured ACR, SPCR, SCCR,
and LCRR bitfields) moved the LCRR assignment to after relocation
to RAM because of the potential problem with changing the local bus
clock while executing from flash.

This change unfortunately adversely affects the boot time, as running
all code up to cpu_init_r can cause significant slowdown.

E.G. on a 8347 board a bootup time increase of ~600ms has been observed:

   0.020 CPU:   e300c1, MPC8347_PBGA_EA, Rev: 3.0 at 400 MHz, CSB: 266.667 MHz
   0.168 RS:    232
   0.172 I2C:   ready
   0.176 DRAM:  64 MB
   1.236 FLASH: 32 MB

Versus:

   0.016 CPU:   e300c1, MPC8347_PBGA_EA, Rev: 3.0 at 400 MHz, CSB: 266.667 MHz
   0.092 RS:    232
   0.092 I2C:   ready
   0.096 DRAM:  64 MB
   0.644 FLASH: 32 MB

So far no boards have needed the late LCRR setup, so simply revert it
for now - If it is needed at a later time, those boards can either do
their own final LCRR setup in board code (E.G. in board_early_init_r),
or we can introduce a CONFIG_SYS_LCRR_LATE config option to only do
the setup in cpu_init_r.
Signed-off-by: NPeter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>

There is more and more usage of printing 64bit values,
so enable this feature generally, and delete the
CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL
defines.
Signed-off-by: NHeiko Schocher <hs@denx.de>

u-boot updates, before starting Linux, the memory node in the
DTS. As this is a "standard" feature, move this functionality
to the cpu.c file for mpc5xxx and mpc512x processors.
Signed-off-by: NHeiko Schocher <hs@denx.de>

We are using generic implementation of ffs. This should
be part of Simon's commit 0413cfec

Here is warning message which this patch removes.

In file included from /tmp/u-boot-microblaze/include/common.h:38,
                 from cmd_mtdparts.c:87:
/tmp/u-boot-microblaze/include/linux/bitops.h:123:1: warning: "ffs" redefined
In file included from /tmp/u-boot-microblaze/include/linux/bitops.h:110,
                 from /tmp/u-boot-microblaze/include/common.h:38,
                 from cmd_mtdparts.c:87:
/tmp/u-boot-microblaze/include/asm/bitops.h:269:1:
warning: this is the location of the previous definition
Signed-off-by: NMichal Simek <monstr@monstr.eu>

A typo caused the stack and malloc regions to overlap, which prevented
mem_malloc_init() from returning. This commit makes the memory layout match
the example described in include/configs/microblaze-generic.h
Signed-off-by: NGraeme Smecher <graeme.smecher@mail.mcgill.ca>
Signed-off-by: NMichal Simek <monstr@monstr.eu>

Signed-off-by: NWolfgang Denk <wd@denx.de>

Previously MAKEALL would always return a value of 0, even if 1 or more
boards did not compile.  This change causes MAKEALL to return 0 if all
boards were able to build, otherwise 1.

This change also requires changing the script interpreter from sh to
bash to support bash's PIPESTATUS variable.
Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>

Recent commits 1a99de2c and
6a590c5f both fixed the same bug in the
same manner.  Unfortunately git was "smart" enough to merge both changes
which resulted in some duplicate code.
Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>

Reordered code and comment a bit.
Signed-off-by: NWolfgang Denk <wd@denx.de>

commit bd3784df deleted some unused
code in do_i2c_mw(), but missed to also remove the respective
commment. This patch fixes this.
Signed-off-by: NHeiko Schocher <hs@denx.de>

add the following commands for the manroland boards:

CONFIG_CMDLINE_EDITING
CONFIG_COMMAND_HISTORY
CONFIG_AUTO_COMPLETE
Signed-off-by: NHeiko Schocher <hs@denx.de>

Conflicts:
	lib_generic/zlib.c
Signed-off-by: NWolfgang Denk <wd@denx.de>

This patch introduces a weak default function for post_hotkey_pressed(),
returning 0, for boards without hotkey support. The long-running tests
won't be started on those boards. This default function was implemented
in many board directories. By implementing this weak default we can
remove all those duplicate versions.

Boards with hotkey support, can override this weak default function
by defining one in their board specific code.
Signed-off-by: NStefan Roese <sr@denx.de>

To update the real memory size in the memory node on the
uc101 and mucmc52 boards call fdt_fixup_memory() in
ft_board_setup().
Signed-off-by: NHeiko Schocher <hs@denx.de>

Depending on offset, flash size and the number of bad blocks,
get_len_incl_bad may return a too small value which may lead to:

1) If there are no bad blocks, nand_{read,write}_skip_bad chooses the
bad block aware read/write code. This may hurt performance, but does
not have any adverse effects.

2) If there are bad blocks, the nand_{read,write}_skip_bad may choose
the bad block unaware read/write code (if len_incl_bad == *length)
which leads to corrupted data.
Signed-off-by: NDaniel Hobi <daniel.hobi@schmid-telecom.ch>

- NfsTimeout() does not correctly update the NFS timeout value which
  results in NfsTimeout() only being called once in certain situations.
  This can result in the 'nfs' command hanging indefinetly.  For
  example, the command:

    nfs 192.168.0.1:/home/user/file

  will not exit until ctrl-c is pressed if 192.168.0.1 does not have an
  NFS server running.

  This issue is resolved by reinitializting the NFS timeout value inside
  NfsTimeout() when a timeout occurs.

- Make the 'nfs' command print the 'T' character when a timeout occurs.
  Previously there was no indication that timeouts were occuring.

- Mimic the 'tftpboot' command and when a download fails print "Retry
  count exceeded; starting again", and restart the download taking the
  'netretry' environment variable into account.
Signed-off-by: NEvan Samanas <esamanas@xes-inc.com>
Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>

Tested on TQM8xxL.

Tested by: Wolfgang Denk <wd@denx.de>

Tested on MPC8527DS.

Tested by: Ed Swarthout <Ed.Swarthout@freescale.com>

The help message for the 'bootm' command listed the 'cmdline' and 'bdt'
sub-commands in the wrong order which resulted in the error below when
following the 'help' command's instructions:

  "Trying to execute a command out of order"
Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>

"nandecc" help output should not reproduce the command name, nor have
a trailing newline.
Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca>

Since commit 736fead8 "Convert SMC911X
Ethernet driver to CONFIG_NET_MULTI API" SMC911X configration options
are called CONFIG_SMC911X rather than CONFIG_DRIVER_SMC911X. Update
README to reflect that change.
Signed-off-by: NMike Rapoport <mike@compulab.co.il>

Signed-off-by: NMike Rapoport <mike@compulab.co.il>

An off by one error may cause nfs readlink lookup fail if
nfs_path_buff has non-zero data from a previous use.

Loading: *** ERROR: File lookup fail
Signed-off-by: NEd Swarthout <Ed.Swarthout@freescale.com>

Signed-off-by: NWolfgang Denk <wd@denx.de>

Signed-off-by: NWolfgang Denk <wd@denx.de>

Commit dce3d797 updated the zlib code to v0.95; this caused
conflicts when building for the "cradle" board, because the (pretty
generic) preprocessor variable "OFF" was used in multiple files.
Make sure to avoid further conflicts by #undef'ing it in zlib.c
before redefining it.
Signed-off-by: NWolfgang Denk <wd@denx.de>
cc: Giuseppe Condorelli <giuseppe.condorelli@st.com>
cc: Angelo Castello <angelo.castello@st.com>
cc: Alessandro Rubini <rubini-list@gnudd.com>