This is required for the bdinfo command to work.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Fix syntax error.
Signed-off-by: NWolfgang Denk <wd@denx.de>

This adds basic files for the sandbox board. The lds file is very simple
since we can rely mostly on the linker defaults.
Signed-off-by: NSimon Glass <sjg@chromium.org>

These files are taken from the ARM board implementation and then reduced
to remove unneeded cruft.

Ideally we would work towards unifying arch/xxx/lib files, particularly
board.c.
Signed-off-by: NSimon Glass <sjg@chromium.org>

This is an initial implementation with all functions defined but not working.

The lds file is very simple since we can mostly rely on the linker defaults.
Signed-off-by: NSimon Glass <sjg@chromium.org>

This sets __WORDSIZE to 8 correctly on 64-bit machines.
Signed-off-by: NSimon Glass <sjg@chromium.org>

We won't actually load an image with this architecture, but we still need to
define it.
Signed-off-by: NSimon Glass <sjg@chromium.org>

It is better to use %p in this case.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Acked-by: NMike Frysinger <vapier@gentoo.org>

This adds required header files for the sandbox architecture, and a basic
description of what sandbox is (README.sandbox).
Signed-off-by: NSimon Glass <sjg@chromium.org>

Signed-off-by: NJason Hobbs <jason.hobbs@calxeda.com>
Cc: Matt Waddel <matt.waddel@linaro.org>

Signed-off-by: NJason Hobbs <jason.hobbs@calxeda.com>
Cc: Matt Waddel <matt.waddel@linaro.org>

Signed-off-by: NJason Hobbs <jason.hobbs@calxeda.com>
Cc: Matt Waddel <matt.waddel@linaro.org>

These options are required to be present in RFC 4578 compliant DHCP
requests. They give more information to DHCP servers to allow serving

different DHCP responses to different systems based on client
architecture, client capabilities, UUID, or vendor.
Signed-off-by: NJason Hobbs <jason.hobbs@calxeda.com>

Add pxe command, which is intended to mimic PXELINUX functionality.
'pxe get' uses tftp to retrieve a file based on UUID, MAC address or IP
address. 'pxe boot' interprets the contents of PXELINUX config like file
to boot using a specific initrd, kernel and kernel command line.

This patch also adds a README.pxe file - see it for more details on the
pxe command.
Signed-off-by: NJason Hobbs <jason.hobbs@calxeda.com>

Signed-off-by: NJason Hobbs <jason.hobbs@calxeda.com>

With these documented, we can start pushing towards standardizing their
use across boards.
Signed-off-by: NJason Hobbs <jason.hobbs@calxeda.com>
Cc: Mike Frysinger <vapier@gentoo.org>

These are various places I found that checked for conditions equivalent
to isblank.
Signed-off-by: NJason Hobbs <jason.hobbs@calxeda.com>

This prevents a checkpatch warning in the patch to use isblank
Signed-off-by: NJason Hobbs <jason.hobbs@calxeda.com>

Existing ctype checks are implemented using a 256 byte lookup table,
allowing each character to be in any of 8 character classes. Since there
are 8 existing character classes without the blank class, I implemented
isblank without using the lookup table.  Since there are only two blank
characters - tab and space - this is a more reasonable approach than
doubling the size of the lookup table to accommodate one more class.
Signed-off-by: NJason Hobbs <jason.hobbs@calxeda.com>

Signed-off-by: NJason Hobbs <jason.hobbs@calxeda.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Acked-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NJason Hobbs <jason.hobbs@calxeda.com>

This will be used first by the pxe code, but is intended to be
generic and reusable for other jobs in U-boot.
Signed-off-by: NJason Hobbs <jason.hobbs@calxeda.com>

commit a45dde22 changed the dm9000
direct register access to standard IO. This should work
on the ColdFire platform as there are corresponding macros for
the LE devices. But the hardware settings on some ColdFire boards had
swapped the byte order which make the original macros such as out_le16
cannot work. To avoid changing the common io access code on ColdFire
platform, the DM9000_BYTE_SWAPPED define was added to make the dm9000 use
__raw* IO access on some ColdFire boards.
Signed-off-by: NJason Jin <Jason.jin@freescale.com>

The function kw_gpio_is_valid returns zero on success, so
adapt the error check accordingly.
Signed-off-by: NHolger Brunck <holger.brunck@keymile.com>
cc: Prafulla Wadaskar <prafulla@marvell.com>
cc: Dieter Kiermaier <dk-arm-linux@gmx.de>

The new debug() changes pointed out debug code that rotted a little.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Common U-Boot API wants this define, so import asm/cache.h from Linux
to provide suitable defines.
Acked-by: NAnton Staaf <robotboy@chromium.org>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

mx3fb.c was based on CONFIG_LCD and is moved by this patch to
CONFIG_VIDEO, which has greater freedom in selecting videomodes
even at runtime.

This renders the accumulating list of display defines
(CONFIG_DISPLAY_VBEST..., CONFIG_DISPLAY_C057...) obsolete as
these may be setup through env variables:

uboot> setenv mydisplay 'video=ctfb:x:240,y:320,depth:16,mode:0,pclk:185925,
	le:9,ri:17,up:7,lo:10,hs:1,vs:1,sync:100663296,vmode:0'
uboot> setenv videomode ${mydisplay}

This commit also fixes the board config files for qong and
imx31_phycore boards as needed. The videomode settings of
previously supported displays are added to CONFIG_EXTRA_ENV_SETTINGS
now. CONFIG_SYS_MALLOC_LEN for imx31_phycore board is increased
to make the frame buffer allocation working with the changed
driver.
Signed-off-by: NHelmut Raiger <helmut.raiger@hale.at>
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
Cc: Stefano Babic <sbabic@denx.de>

This additionally updates mx31/generic.c by
- replacing __REG() macro accesses with readl() and writel()
- providing macros for PDR0 and PLL bit accesses
Signed-off-by: NHelmut Raiger <helmut.raiger@hale.at>
Acked-by: NMarek Vasut <marek.vasut@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Acked-by: NStefano Babic <sbabic@denx.de>
Signed-off-by: NAnatolij Gustschin <agust@denx.de>

Signed-off-by: NMarek Vasut <marek.vasut@gmail.com>
Signed-off-by: NStefano Babic <sbabic@denx.de>
Tested-by: NStefano Babic <sbabic@denx.de>
Signed-off-by: NAnatolij Gustschin <agust@denx.de>

Pixel format defines must be available for boards to set up
the right display. Move them and export in a new file.
Signed-off-by: NStefano Babic <sbabic@denx.de>
CC: Anatolij Gustschin <agust@denx.de>
CC: Marek Vasut <marek.vasut@gmail.com>
Tested-by: NStefano Babic <sbabic@denx.de>
Signed-off-by: NAnatolij Gustschin <agust@denx.de>

The framebuffer driver for MX5 is based on CONFIG_LCD.
In the current implementation, there is a serious bug
because the required memory is allocated before
relocation, but the driver knows only later which is
the resolution of the display. The patch switches the driver
to CONFIG_VIDEO and the memory is allocated by the driver itself.

We also need to switch the vision2 board code and config file
in the same commit so that this commit will be bisectable.
Signed-off-by: NStefano Babic <sbabic@denx.de>
CC: Anatolij Gustschin <agust@denx.de>
Tested-by: NStefano Babic <sbabic@denx.de>
Signed-off-by: NAnatolij Gustschin <agust@denx.de>

Update the Freescale DIU video driver (fsl_diu_fb.c) to use linux/fb.h.
Some data structures from this header file were just copied into
fsl_diu_fb.c.
Signed-off-by: NTimur Tabi <timur@freescale.com>

In the recent dropping of !NET_MULTI code (commit e2a53458),
I misread the logic in include/net.h.  Some of it was used by NET_MULTI
code as glue between the multi/non-multi worlds for cpm2 boards.

Rather than restore the block of code, push the logic to the board config
headers where it all belongs.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

If compressed data is located in sectors at the end of the flash and
it's offset + input stream size > 0xFFFFFFFF, the uncompressing time
is very long, since processing of the stream is done bytewise (and
not blockwise) due to overflow in inflate_fast() while calculation
and checking for enough input available.

Check for this overflow condition and limit the available stream
input size to the actually max. possible input size. This fixes
the problem.

The issue is easily reproduceable by placing a gziped bitmap in flash,
e.g. at FFF80000, and running 'bmp' commands like 'bmp info FFF80000'
or 'bmp display FFF80000'. The uncompressing can take up to 3 sec.
whereas it should normaly take a fraction of a second. If the
'splashimage' environment variable points to this address, the
booting time also increases significantly.
Signed-off-by: NAnatolij Gustschin <agust@denx.de>

No code defines or calls this, so drop the prototype.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Acked-by: NSimon Glass <sjg@chromium.org>

The top level Makefile does not do any recursion into subdirs when
cleaning, so these clean/distclean targets in random arch/board dirs
never get used.  Punt them all.

MAKEALL didn't report any errors related to this that I could see.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

The command auto-completion does not work on architectures relying
on CONFIG_NEEDS_MANUAL_RELOC like MIPS. Cause is the missing function
pointer fixup for cmd_tbl_t::complete function in fixup_cmdtable().

This patch adds the missing pointer fixup in case of CONFIG_AUTO_COMPLETE
is defined.
Signed-off-by: NDaniel Schwierzeck <daniel.schwierzeck@googlemail.com>

A delay of approximately 250 ms after PCI bus reset in
pci_mpc5xxx_init() is needed to recognize the Coral-PA
controller on the graphic extention board.
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
Acked-by: NDetlev Zundel <dzu@denx.de>

PCI cards might need some time after reset to respond. On some
boards (mpc5200 or mpc8260 based) the PCI bus reset is deasserted
at pci_init_board() time, so we currently can not use available
"pcidelay" option for waiting before PCI bus scan since this
waiting takes place before calling pci_init_board(). By moving
the pcidelay code to the new location using of the "pcidelay"
option is possible on mpc5200 or mpc8260 based boards, too.

Since pci_hose_scan() could be called multiple times, restrict
the function to wait only during its first call and to ignore
pcidelay for any further call (as pointed out by Matthias).
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
Cc: Matthias Fuchs <matthias.fuchs@esd.eu>
Acked-by: NStefan Roese <sr@denx.de>
Acked-by: NMatthias Fuchs <matthias.fuchs@esd.eu>
Tested-by: NMatthias Fuchs <matthias.fuchs@esd.eu>

Add axi_ethernet driver for little-endian Microblaze.

RX/TX BDs and rxframe buffer are shared among all axi_ethernet MACs.
Only one MAC can work in one time.
Signed-off-by: NMichal Simek <monstr@monstr.eu>
Acked-by: NMike Frysinger <vapier@gentoo.org>

Coding style should follow linux coding style.
Signed-off-by: NMichal Simek <monstr@monstr.eu>