- 14 8月, 2018 29 次提交
-
-
由 Patrice Chotard 提交于
As cd-inverted property is no more used by arm_pl180_mmci driver, remove it. Update cd-gpios active level accordingly. Reported-by: NTuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
-
由 Patrice Chotard 提交于
As cd-inverted property is no more used by arm_pl180_mmci driver, remove it. Update cd-gpios active level accordingly. Reported-by: NTuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
-
由 Derald D. Woods 提交于
This commit enables CONFIG_BLK and removes USB_STORAGE which is awaiting proper implementation for current U-Boot interfaces. Additionally the console selection is now handled by Kconfig and no longer needs to be in the config header. CONFIG_SYS_MALLOC_F_LEN=0x2000 was added to sync with other boards. CONFIG_SPL_BLK and CONFIG_SPL_DM_MMC are disabled because they currently do not allow the OMAP3-EVM (OMAP34XX) to actually boot. Signed-off-by: NDerald D. Woods <woods.technical@gmail.com>
-
由 Miquel Raynal 提交于
The recv variable in sandbox_tpm2_fill_buf() is a pointer on a pointer of a char array. It means accessing *recv is the char array pointer itself while **recv is the first character of that array. There is no need for such indirection here, so simplify the code. Simplifying things will make the last assignment right: "*recv = NULL" is now correct. The issue has been found by the following Coverity Scan report: CID 183371: Incorrect expression (UNUSED_VALUE) Assigning value "4UL" to "*recv" here, but that stored value is overwritten before it can be used. 232 *recv += sizeof(rc); 233 234 /* Add trailing \0 */ 235 *recv = NULL; While at simplifying things, use '\0' instead of NULL when adding an empty char at the end of the buffer. Reported-by: NTom Rini <trini@konsulko.com> Signed-off-by: NMiquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Miquel Raynal 提交于
The second check on pcr_map in sandbox_tpm2_xfer() is wrong. It should check for pcr_map not being empty. Instead, it is a pure copy/paste of the first check which is redundant. This has been found thanks to a Coverity Scan report: CID 183370: Memory - illegal accesses (UNINIT) Using uninitialized value "pcr_index". put_unaligned_be32(tpm->pcr_extensions[pcr_index], recv); This is because pcr_index is initialized only if the user input is correct, ie. at least one valid bit is set in pcr_map. Fix the second check and also initialize pcr_index to 0 (which is harmless in case of error) to make Coverity Scan happy. Reported-by: NTom Rini <trini@konsulko.com> Signed-off-by: NMiquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Ramon Fried 提交于
Add scattered driver files around the source tree that belongs to Snapdragon arch. Not sure why they were not included in the first place. Signed-off-by: NRamon Fried <ramon.fried@gmail.com>
-
由 Ramon Fried 提交于
1. Add FIT support for DB410c defconfig. 2. Don't overwrite bootargs (they're already defined in Linux device tree for DB410c. Signed-off-by: NRamon Fried <ramon.fried@gmail.com>
-
由 Ramon Fried 提交于
Change the way MAC address fixup is done: 1. Stop using LK handed device-tree and calculate the MAC address our own. 2. Allow overriding the generated MACS with environment variables: "wlanaddr" and "btaddr". Signed-off-by: NRamon Fried <ramon.fried@gmail.com>
-
由 Ramon Fried 提交于
Add support for generation of unique MAC address that is derived from board serial. Algorithm for generation of MAC taken from LK. Signed-off-by: NRamon Fried <ramon.fried@gmail.com>
-
由 Ramon Fried 提交于
This commit adds a function to get the board serial number. In snapdragon it's actually the eMMC serial number. Function added in a new file misc.c that will include further snapdragon miscellaneous functions. Signed-off-by: NRamon Fried <ramon.fried@gmail.com>
-
由 Patrice Chotard 提交于
Commit 1473b12a ("lib: fdtdec: Update ram_base to store ram start adddress") brings regression on STM32F7 which can't boot. Use fdtdec_setup_mem_size_base() to setup memory base and size. Use fdtdec_setup_memory_banksize() to setup memory bank base and size. Reported-by: NMark Olsson <mark@markolsson.se> Signed-off-by: NPatrice Chotard <patrice.chotard@st.com> Cc: Mark Olsson <mark@markolsson.se> Reviewed-by: NVikas Manocha <vikas.manocha@st.com>
-
由 Patrice Chotard 提交于
Add DISTRO_DEFAULT support to be able to boot on mmc by default on boot. Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
-
由 Patrice Chotard 提交于
Add DISTRO_DEFAULT support to be able to boot on mmc by default on boot. Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
-
由 Patrice Chotard 提交于
Add DISTRO_DEFAULT support to be able to boot on mmc by default on boot. Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
-
由 Patrice Chotard 提交于
Add DISTRO_DEFAULT support to be able to boot on mmc by default on boot. Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
-
由 Patrice Chotard 提交于
Since commit bfea69ad ("stm32f7: sdram: correct sdram configuration as per micron sdram"), CONFIG_SYS_RAM_FREQ_DIV flag is no more used, remove it. Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
-
由 Patrice Chotard 提交于
Remove CONFIG_CMD_CACHE from include/configs/stm32h7xx.h and enable it in stm32h7xx_defconfig Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
-
由 Patrice Chotard 提交于
Remove CONFIG_CMD_CACHE from include/configs/stm32f746-disco.h and enable it in stm32f746-disco_defconfig Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
-
由 Patrice Chotard 提交于
Enable instruction and data caches. Fix boot_sd command as since commit d409c962 ("armv7m: disable icache before linux booting"), instruction cache is automatically disable before linux booting. "icache off" from boot_sd command becomes useless, remove it. Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
-
由 Patrice Chotard 提交于
This flag is not used, remove it. Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
-
由 Patrice Chotard 提交于
Since commit aa5e3e22 ("board: stm32: switch to DM STM32 timer") SYS_CLK_FREQ is useless, remove it from stm32f4 and stm32f7 boards. Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
-
由 Patrice Chotard 提交于
Use gd->bd->bi_dram[0].start initialized from DT instead of using hardcoded CONFIG_SYS_SDRAM_BASE from config file. Remove unused CONFIG_SYS_RAM_BASE and CONFIG_SYS_SDRAM_BASE defines. Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
-
由 Eugen Hristev 提交于
In case the slow clock is not properly configured, the UTMI clock cannot lock the PLL, because UPLLCOUNT will "wait X slow clock cycles". In this case U-boot will loop indefinitely. Added a timeout in this case, to start U-boot even if UTMI clock is not enabled, so the user can use different media if needed, or investigate. Signed-off-by: NEugen Hristev <eugen.hristev@microchip.com>
-
由 Thomas Fitzsimmons 提交于
Move some configuration #defines that do not apply to other bcmstb boards from bcmstb.h to bcm7445.h. Signed-off-by: NThomas Fitzsimmons <fitzsim@fitzsim.org>
-
由 Thomas Fitzsimmons 提交于
Move the contents of prior_stage.h into bcmstb.h to prevent a build failure when bcmstb.h is #include'ed before the asm/arch symbolic link is present. Signed-off-by: NThomas Fitzsimmons <fitzsim@fitzsim.org>
-
由 Caliph Nomble 提交于
Fix LibreSSL compilation for versions before v2.7.0. Signed-off-by: NCaliph Nomble <nomble@palism.com> Reviewed-by: NJonathan Gray <jsg@jsg.id.au>
-
由 Heinrich Schuchardt 提交于
%s/dumm /dummy / Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Igor Opaniuk 提交于
Implement get_size_of_partition() operation, which is required by the latest upstream libavb [1]. [1] https://android.googlesource.com/platform/external/avb/+/android-p-preview-5Signed-off-by: NIgor Opaniuk <igor.opaniuk@linaro.org> Acked-by: NAndrew F. Davis <afd@ti.com> Reviewed-by: NSam Protsenko <semen.protsenko@linaro.org>
-
-
- 12 8月, 2018 2 次提交
-
-
- 11 8月, 2018 9 次提交
-
-
由 Mario Six 提交于
Add driver for the IHS IO endpoint on IHS FPGAs. Signed-off-by: NMario Six <mario.six@gdsys.cc>
-
由 Mario Six 提交于
Add a set of tests for the misc uclass. Signed-off-by: NMario Six <mario.six@gdsys.cc> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Mario Six 提交于
Add generic enable/disable function to the misc uclass. Reviewed-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NMario Six <mario.six@gdsys.cc>
-
由 Mario Six 提交于
The comments in misc.h are not in kernel-doc format. Correct the format. Signed-off-by: NMario Six <mario.six@gdsys.cc>
-
由 Mario Six 提交于
Add a driver for the Xilinx LogiCORE DisplayPort IP core, which is a pure DP transmitter core for Xiling FPGA (no display capabilities). Signed-off-by: NMario Six <mario.six@gdsys.cc>
-
由 Mario Six 提交于
The entries of Makefiles should be sorted, which is not the case in the video driver Makefile. Sort the entries alphabetically as far as this makes sense. Signed-off-by: NMario Six <mario.six@gdsys.cc>
-
由 Mario Six 提交于
Add a command to debug the AXI bus. Reviewed-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NMario Six <mario.six@gdsys.cc>
-
由 Mario Six 提交于
Add tests for the AXI uclass. Reviewed-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NMario Six <mario.six@gdsys.cc>
-
由 Mario Six 提交于
Add test AXI drivers to the sandbox. Reviewed-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NMario Six <mario.six@gdsys.cc>
-