Removed boot_flash_* extern variables.
boot_flash_type was totally unused. The other ones were actually constants, so
they have been replaced with #defines in the board config files.
Signed-off-by: NLuca Ceresoli <luca.ceresoli@comelit.it>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Albert Aribaud <albert.aribaud@free.fr>
Cc: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>

Signed-off-by: NTom Warren <twarren@nvidia.com>

Signed-off-by: NTom Warren <twarren@nvidia.com>

Signed-off-by: NTom Warren <twarren@nvidia.com>

Since addr_sp is a byte address, it should be adjusted by 12 here.
Signed-off-by: NEric Cooper <ecc@cmu.edu>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Acked-by: NWolfgang Denk <wd@denx.de>

Signed-off-by: NTom Warren <twarren@nvidia.com>

Signed-off-by: NLuca Ceresoli <luca.ceresoli@comelit.it>
Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>

CONFIG_OMAP34XX must be checked for existence, not value.
Signed-off-by: NLuca Ceresoli <luca.ceresoli@comelit.it>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Albert Aribaud <albert.aribaud@free.fr>
Cc: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>

The reset sequence/configuration for ehci is highly board specific,
so this will be done in the source for the board, instead of
introducing several CONFIG_* which would be needed to make those
few lines in beagle.c usable across different OMAP boards.
Signed-off-by: NAlexander Holler <holler@ahsoftware.de>
Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>

Signed-off-by: NAlexander Holler <holler@ahsoftware.de>
Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>

Signed-off-by: NAlexander Holler <holler@ahsoftware.de>
Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>

The default IGEP configuration doesn't do anything useful; using some
boot.scr search logic like BeagleBoard is much more useful.
Signed-off-by: NEnric Balletbo i Serra <eballetbo@iseebcn.com>
Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>

configuration

The default IGEP configuration doesn't do anything useful; using some
boot.scr search logic like BeagleBoard is much more useful.
Signed-off-by: NLoïc Minier <loic.minier@linaro.org>
Signed-off-by: NEnric Balletbo i Serra <eballetbo@iseebcn.com>
Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>

Signed-off-by: NAlbert ARIBAUD <albert.u.boot@aribaud.net>

Fix include path of timer fttmr010 in a320evb.
Signed-off-by: NMacpaul Lin <macpaul@andestech.com>

Move the header file and definitions of fttmr010
power control unit from a320 SoC folder to
"include/faraday" folder.

This change will let other SoC which also use fttmr010
could share the same header file.
Signed-off-by: NMacpaul Lin <macpaul@andestech.com>

Add asm support which is ususally used in lowlevel_init to set
power related parameters to sdram controller and static memory controller.
Signed-off-by: NMacpaul Lin <macpaul@andestech.com>

1. ftpmu010.h: fix and add definitions
   Enhanced for more features and asm related support
   according to datasheet.

   Note:
    - FTPMU010_PDLLCR0_HCLKOUTDIS is "incorrect" in datasheet.
    - FTPMU010_PDLLCR0_DLLFRANG is only 1 bit at bit #19. (not 20-19)
    - FTPMU010_PDLLCR0_HCLKOUTDIS is 4 bits at bit #20. (not 24-21)

2. ftpmu010.c: enhance features and fix relocation
   - The following functions is added for pmu features.
     ftpmu010_mfpsr_select_dev()
     ftpmu010_sdramhtc_set()
   - This patch also fix the declare statement for relocation.
Signed-off-by: NMacpaul Lin <macpaul@andestech.com>

Add i2c support to aspenite board with Armada100 soc.
Acked-by: NHeiko Schocher <hs@denx.de>
Acked-by: NPrafulla Wadaskar <prafulla@marvell.com>
Signed-off-by: NLei Wen <leiwen@marvell.com>

Add the ability to support multiple i2c bus for mv_i2c
Acked-by: NHeiko Schocher <hs@denx.de>
Acked-by: NPrafulla Wadaskar <prafulla@marvell.com>
Signed-off-by: NLei Wen <leiwen@marvell.com>

Add i2c support to dkb board with pantheon soc.
Acked-by: NHeiko Schocher <hs@denx.de>
Acked-by: NPrafulla Wadaskar <prafulla@marvell.com>
Signed-off-by: NLei Wen <leiwen@marvell.com>

Add i2c_clk_enable in the cpu specific code, since previous platform it,
while new platform don't need. In the pantheon and armada100 platform,
this function is defined as NULL one.
Acked-by: NHeiko Schocher <hs@denx.de>
Acked-by: NPrafulla Wadaskar <prafulla@marvell.com>
Signed-off-by: NLei Wen <leiwen@marvell.com>

The original 10000 value would be 100ms, which is not
the comments said.
Acked-by: NHeiko Schocher <hs@denx.de>
Acked-by: NPrafulla Wadaskar <prafulla@marvell.com>
Signed-off-by: NLei Wen <leiwen@marvell.com>

For better sharing with other platform other than pxa's,
it is more convenient to put the driver to the common place.
Acked-by: NHeiko Schocher <hs@denx.de>
Acked-by: NPrafulla Wadaskar <prafulla@marvell.com>
Signed-off-by: NLei Wen <leiwen@marvell.com>

Commit f326cbba (arm: fix incorrect monitor protection region in FLASH) missed to update
nand_spl/board/karo/tx25/u-boot.lds.

Add the _end section.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>

Commit f326cbba breaks mx31pdk,
as the _end section in u-boot.lds is missing for the nand_spl
production.
Signed-off-by: NStefano Babic <sbabic@denx.de>
CC: Fabio Estevam <fabio.estevam@freescale.com>
Tested-by: NFabio Estevam <fabio.estevam@freescale.com>

Remove obsolete board config.mk.
Signed-off-by: NMatt Waddel <matt.waddel@linaro.org>

ftpmu010 related code has been moved to drivers/power/.
Signed-off-by: NPo-Yu Chuang <ratbert@faraday-tech.com>
Signed-off-by: NAlbert Aribaud <albert.aribaud@free.fr>

Also add API declarations.
Signed-off-by: NPo-Yu Chuang <ratbert@faraday-tech.com>
Signed-off-by: NAlbert Aribaud <albert.aribaud@free.fr>

Using optimized versions of memset and memcpy from linux brings a quite
noticeable speed (x2 or better) improvement for these two functions.

Here are some numbers for test done with jadecpu

                           | HEAD(1)| HEAD(1)| HEAD(2)| HEAD(2)|
                           |        | +patch |        | +patch |
---------------------------+--------+--------+--------+--------+
Reset to prompt            |  438ms |  330ms |  228ms |  120ms |
                           |        |        |        |        |
TFTP a 3MB img             | 4782ms | 3428ms | 3245ms | 2820ms |
                           |        |        |        |        |
FATLOAD USB a 3MB img*     | 8515ms | 8510ms | ------ | ------ |
                           |        |        |        |        |
BOOTM LZO img in RAM       | 3473ms | 3168ms |  592ms |  592ms |
 where CRC is              |  615ms |  615ms |   54ms |   54ms |
 uncompress                | 2460ms | 2462ms |  450ms |  451ms |
 final boot_elf            |  376ms |   68ms |   65ms |   65ms |
                           |        |        |        |        |
BOOTM LZO img in FLASH     | 3207ms | 2902ms | 1050ms | 1050ms |
 where CRC is              |  600ms |  600ms |  135ms |  135ms |
 uncompress                | 2209ms | 2211ms |  828ms |  828ms |
                           |        |        |        |        |
Copy 1.4MB from NOR to RAM |  134ms |   72ms |  120ms |   70ms |

(1) No dcache
(2) dcache enabled in board_init
*Does not work when dcache is on

Size impact:

C version:
   text    data     bss     dec     hex filename
 202862   18912  266456  488230   77326 u-boot

ASM version:
   text    data     bss     dec     hex filename
 203798   18912  266288  488998   77626 u-boot
222712  u-boot.bin
Signed-off-by: NMatthias Weisser <weisserm@arcor.de>

CM-T3730 is exactly the same board as CM-T35, but it has
TI DM3730 SoC onboard and therefore some changes have to take place
Signed-off-by: NIgor Grinberg <grinberg@compulab.co.il>
Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>

Signed-off-by: NIgor Grinberg <grinberg@compulab.co.il>
Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>

Signed-off-by: NIgor Grinberg <grinberg@compulab.co.il>
Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>

Use CONFIG_OMAP3_MMC in cm-t35 configuration file.
Signed-off-by: NIgor Grinberg <grinberg@compulab.co.il>
Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>

Signed-off-by: NIgor Grinberg <grinberg@compulab.co.il>
Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>

Signed-off-by: NIgor Grinberg <grinberg@compulab.co.il>
Acked-by: NMike Rapoport <mike@compulab.co.il>
Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>

Signed-off-by: NIgor Grinberg <grinberg@compulab.co.il>
Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>

update config for OMAP3 CM-T35
Signed-off-by: NIgor Grinberg <grinberg@compulab.co.il>
Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>

Move DECLARE_GLOBAL_DATA_PTR to file scop
Signed-off-by: NIgor Grinberg <grinberg@compulab.co.il>
Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>