This tool provides the facility to decode U-Boot trace data and write out
a text file in Linux ftrace format for use with pytimechart.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Add hooks for tracing to generic board, including:

- allow early tracing to start early as possible in U-Boot
- reserve memory for trace buffer
- copy early trace buffer to main trace buffer after relocation
- setup full tracing support after relocation
Signed-off-by: NSimon Glass <sjg@chromium.org>

Use -finstrument-functions when tracing is enabled (make FTRACE=1).
Tracing is not currently supported by SPL even if sufficient memory is
available.

When tracing is enabled, we #define FTRACE. This can be used by
board config files to conditionally enable the tracing options.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Add a trace command with sub-commands to start/stop tracing, print out
statistics and dump trace information to memory for later upload to a host.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Add a library which supports tracing of execution using built-in gcc
features and a microsecond timer. This can be used to record a list of
function which are executed, along with a timestamp for each. Later
this information can be sent to the host for processing.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Move bootstage's numbering printing code into a generic place so that it can
be used by tracing also.
Signed-off-by: NSimon Glass <sjg@chromium.org>

The unstash code is a bit loose with its printf() types, which gives
warnings on sandbox. Correct this.
Signed-off-by: NSimon Glass <sjg@chromium.org>

When this test fails it is useful to see the output from U-Boot. Add
printing of this information on failure.
Signed-off-by: NSimon Glass <sjg@chromium.org>

For some reason this does not normally cause a compiler warning, but the code
seems to be incorrect. Add the missing return.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Enabling FIT produces a compile error. Fix this.
Signed-off-by: NSimon Glass <sjg@chromium.org>

I am not sure of the meaning of extern inline, but this gives errors
when building with function instrumenting enabled. Change these functions
to static inline.
Signed-off-by: NSimon Glass <sjg@chromium.org>

This patch initiates cros-ec in board_init() to enable it for smdk5250.

This patch depends on the patch in the MMC series that brings in exynos5-dt.c.
Refer to http://patchwork.ozlabs.org/patch/240084.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NVincent Palatin <vpalatin@chromium.org>
Signed-off-by: NHung-ying Tyan <tyanh@chromium.org>
Acked-by: NSimon Glass <sjg@chromium.org>

This patch adds cros-ec related device nodes to exynos5250-snow.dts.
It also adds a gpio node to exynos5250.dtsi.
Signed-off-by: NHung-ying Tyan <tyanh@chromium.org>
Acked-by: NSimon Glass <sjg@chromium.org>

This patch adds the driver for keyboard that's controlled by ChromeOS EC.
Signed-off-by: NRandall Spangler <rspangler@chromium.org>
Signed-off-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NVincent Palatin <vpalatin@chromium.org>
Signed-off-by: NHung-ying Tyan <tyanh@chromium.org>
Acked-by: NSimon Glass <sjg@chromium.org>

This patch adds LPC support for carrying out the cros_ec protocol.
Signed-off-by: NRandall Spangler <rspangler@chromium.org>
Signed-off-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NHung-ying Tyan <tyanh@chromium.org>
Acked-by: NSimon Glass <sjg@chromium.org>
Tested-by: NSimon Glass <sjg@chromium.org>

This patch adds SPI support for carrying out the cros_ec protocol.
Signed-off-by: NHung-ying Tyan <tyanh@chromium.org>
Signed-off-by: NRandall Spangler <rspangler@chromium.org>
Signed-off-by: NSimon Glass <sjg@chromium.org>
Acked-by: NSimon Glass <sjg@chromium.org>

This patch adds I2C support for carrying out the cros_ec protocol.
Signed-off-by: NRandall Spangler <rspangler@chromium.org>
Signed-off-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NHung-ying Tyan <tyanh@chromium.org>
Acked-by: NSimon Glass <sjg@chromium.org>
Tested-by: NSimon Glass <sjg@chromium.org>

This patch adds the cros_ec driver that implements the protocol for
communicating with Google's ChromeOS embedded controller.
Signed-off-by: NBernie Thompson <bhthompson@chromium.org>
Signed-off-by: NBill Richardson <wfrichar@chromium.org>
Signed-off-by: NChe-Liang Chiou <clchiou@chromium.org>
Signed-off-by: NDoug Anderson <dianders@chromium.org>
Signed-off-by: NGabe Black <gabeblack@chromium.org>
Signed-off-by: NHung-ying Tyan <tyanh@chromium.org>
Signed-off-by: NLouis Yung-Chieh Lo <yjlou@chromium.org>
Signed-off-by: NRandall Spangler <rspangler@chromium.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NVincent Palatin <vpalatin@chromium.org>
Acked-by: NSimon Glass <sjg@chromium.org>
Tested-by: NSimon Glass <sjg@chromium.org>

add atheros ar803x phy, used on the upcoming siemens boards.
Signed-off-by: NHeiko Schocher <hs@denx.de>
Cc: Andy Fleming <afleming@freescale.com>
Cc: Joe Hershberger <joe.hershberger@gmail.com>

add natsemi dp83630 phy, used on the upcoming siemens boards.
Signed-off-by: NHeiko Schocher <hs@denx.de>
Cc: Andy Fleming <afleming@freescale.com>
Cc: Joe Hershberger <joe.hershberger@gmail.com>

Signed-off-by: NKuo-Jung Su <dantesu@faraday-tech.com>
CC: Joe Hershberger <joe.hershberger@gmail.com>
CC: Tom Rini <trini@ti.com>

Faraday FTMAC110 10/100Mbps supports half-word data transfer for Linux.
However it has a weird DMA alignment issue:

(1) Tx DMA Buffer Address:
    1 bytes aligned: Invalid
    2 bytes aligned: O.K
    4 bytes aligned: O.K

(2) Rx DMA Buffer Address:
    1 bytes aligned: Invalid
    2 bytes aligned: O.K
    4 bytes aligned: Invalid!!!
Signed-off-by: NKuo-Jung Su <dantesu@faraday-tech.com>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
Cc: Tom Rini <trini@ti.com>

Add function ksz9031_phy_extended_write and ksz9031_phy_extended_read
Signed-off-by: NLeo Sartre <lsartre@adeneo-embedded.com>

Add gigabit MAC support in macb driver
  - using IP version to distinguish whether MAC is GMAC
Signed-off-by: NBo Shen <voice.shen@atmel.com>

using phylib to configure phy device in macb driver
Signed-off-by: NBo Shen <voice.shen@atmel.com>

Using CONFIG_AT91FAMILY replace #ifdeferry for atmel SoC
Signed-off-by: NBo Shen <voice.shen@atmel.com>
Acked-by: NAndreas Bießmann <andreas.devel@googlemail.com>

add network support with ksz8851_16mll on at91sam9n12ek board
Signed-off-by: NBo Shen <voice.shen@atmel.com>
Acked-by: NAndreas Bießmann <andreas.devel@googlemail.com>

The device interface is 16 bits wide.
All the available packets are read from the incoming fifo.
Signed-off-by: NRoberto Cerati <roberto.cerati@bticino.it>
Signed-off-by: NRaffaele Recalcati <raffaele.recalcati@bticino.it>
[voice.shen@atmel.com: address comments from review results]
[voice.shen@atmel.com: clean up for submit]
Signed-off-by: NBo Shen <voice.shen@atmel.com>
Tested-by: NRaffaele Recalcati <raffaele.recalcati@bticino.it>

Signed-off-by: NXie Xiaobo <X.Xie@freescale.com>

commit 39695029bc15041c809df3db4ba19bd729c447fa
Author: Charles Coldwell <coldwell@ll.mit.edu>
Date:   Tue Feb 19 08:27:33 2013 -0500

    Changes to support the Xilinx 1000BASE-X phy (GTX/MGT)
Signed-off-by: NCharles Coldwell <coldwell@ll.mit.edu>

Make the link-local code conform more completely with the RFC.

This will prevent ARP queries for the target (such as while it is
rebooting) from causing the device to choose a different link-local
address, thinking that its address is in use by another machine.
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>

Add support for Micrel PHY KSZ9031 in phylib,
including small rework for KSZ9021 to avoid
code duplication
Signed-off-by: NDavid Andrey <david.andrey@netmodule.com>
Cc: Troy Kisky <troy.kisky@boundarydevices.com>
Cc: Joe Herschberger <joe.hershberger@gmail.com>
Cc: Andy Fleming <afleming@freescale.com>
Acked-by: NStefan Roese <sr@denx.de>

tftp.c:464:17: warning: cast to restricted __be16
tftp.c:552:29: warning: cast to restricted __be16
tftp.c:640:33: warning: cast to restricted __be16
tftp.c:642:25: warning: cast to restricted __be16
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Cc: Joe Hershberger <joe.hershberger@gmail.com>

for use with sparse.
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Cc: Joe Hershberger <joe.hershberger@gmail.com>

The added weak symbol must not be static.

This was introduced in 416ce623Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>

SPEAr310 and SPEAr320 Ethernet interfaces share same MDIO lines to control their
respective phys. Currently there is a fixed configuration in which only a
particular MAC can use the MDIO lines.

Call an arch specific function to take control of specific mdio lines at
runtime.
Signed-off-by: NShiraz Hashim <shiraz.hashim@st.com>
Signed-off-by: NVipin Kumar <vipin.kumar@st.com>
Acked-by: NStefan Roese <sr@denx.de>

Do not select MIIPORT for RGMII interface
Signed-off-by: NVipin Kumar <vipin.kumar@st.com>
Acked-by: NStefan Roese <sr@denx.de>

This patch tackles the time out problem which leads to break the
boot process, when loading file over nfs. The patch does two things.

First of all, we just ignore messages that arrive with a rpc_id smaller
then the client id. We just interpret this messages as answers to
formaly timed out messages.

Second, when a time out occurs we double the time to wait, so that we
do not stress the server resending the last message.
Signed-off-by: NMatthias Brugger <matthias.bgg@gmail.com>
Tested-by: NEnric Balletbo i Serra <eballetbo@gmail.com>

Marvell Dove also uses mvgbe as ethernet driver, therefore add support
for Dove to reuse the current driver.
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>