- 05 11月, 2010 6 次提交
-
-
由 Sanjeev Premi 提交于
This patch adds relocation support for omap3evm. Content of the patch is based on changes for Beagleboard. Signed-off-by: NSanjeev Premi <premi@ti.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Enric Balletbo i Serra 提交于
This patch switches from the legacy mmc driver to the new generic mmc driver Signed-off-by: NEnric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Enric Balletbo i Serra 提交于
This patch switches from the legacy mmc driver to the new generic mmc driver Signed-off-by: NEnric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Steve Sakoman 提交于
This patch fixes the issue by defining and using CONFIG_SYS_INIT_RAM_SIZE and CONFIG_SYS_INIT_RAM_ADDR. Based on an email discussion with Wolfgang Denk and Heiko Schocher. Signed-off-by: NSteve Sakoman <steve.sakoman@linaro.org> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Koen Kooi 提交于
Beagle expansion boards contain an i2c eeprom to identify themselves. This patch adds code to read and parse the eeprom contents. It prints the expansion board name and revision and modifies environment variables as appropriate. This patch is based on the Overo expansion board code. Signed-off-by: NKoen Kooi <k-kooi@ti.com> Signed-off-by: NSteve Sakoman <steve.sakoman@linaro.org> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Steve Sakoman 提交于
Overo expansion boards contain an i2c eeprom to identify themselves. This patch adds code to read and parse the eeprom contents. It prints the expansion board name and revision and modifies environment variables as appropriate. Signed-off-by: NSteve Sakoman <steve@sakoman.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
- 30 10月, 2010 2 次提交
-
-
由 Wolfgang Denk 提交于
For ARM systems, before ELF relocation was introduced, CONFIG_SKIP_RELOCATE_UBOOT coul be used to prevent *COPYING* the U-Boot image from whereever it was loaded to it's link address (CONFIG_SYS_TEXT_BASE). The name was badly chosen, as no relocation was performed at all, it was just a memcpy(). With ELF relocation, this does not work like that any more, and related boards need to be fixed anyway. So don't keep this relict any longer. Signed-off-by: NWolfgang Denk <wd@denx.de> Tested-by: NHeiko Schocher <hs@denx.de> Tested-by: NReinhard Meyer <u-boot@emk-elektronik.de>
-
由 Wolfgang Denk 提交于
When this define was introduced, the idea was to provide a soft migration path for ARM boards to get adapted to the new relocation support. However, other recent changes led to a different implementation (ELF relocation), where this no longer works. By now CONFIG_SYS_ARM_WITHOUT_RELOC does not only not help any more, but it actually hurts because it obfuscates the actual code by sprinkling it with lots of dead and non-working debris. So let's make a clean cut and drop CONFIG_SYS_ARM_WITHOUT_RELOC. Signed-off-by: NWolfgang Denk <wd@denx.de> Tested-by: NHeiko Schocher <hs@denx.de> Tested-by: NReinhard Meyer <u-boot@emk-elektronik.de>
-
- 28 10月, 2010 5 次提交
-
-
由 Prafulla Wadaskar 提交于
After moving the definition of CONFIG_SYS_TEXT_BASE to the respective board config files, all Marvell kirkwood board have just a single and common entry in their config.mk files: KWD_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/kwbimage.cfg Replace the only reference to KWD_CONFIG in the top level Makefile by an equivalent setting, and remove all kirkwood config.mk files. Signed-off-by: Wolfgang Denk <wd at denx.de> Cc: Prafulla Wadaskar <prafulla at marvell.com> Cc: Siddarth Gore <gores at marvell.com> Cc: Simon Kagstrom <simon.kagstrom at netinsight.net> Cc: Heiko Schocher <hs at denx.de> Cc: Eric Cooper <ecc at cmu.edu> Acked-by: Wolfgang Denk <wd at denx.de> Signed-off-by: NPrafulla Wadaskar <prafulla@marvell.com>
-
由 Gray Remlin 提交于
Current default options increase u-boot size to overlap the location of the environment in NAND, move environment higher up Signed-off-by: NGray Remlin <g_remlin@rocketmail.com>
-
由 Shawn Guo 提交于
This patch is to fix build breakage and support new relocation scheme for mx51evk. - Correct IRAM base address and add size definition The IRAM starts from 0x1FFE0000 on final revsion i.mx51 than 0x1FFE8000 which is for older revision. - Include imx-regs.h in mx51evk.h Definitions like CSD0_BASE_ADDR and IRAM_BASE_ADDR can be referred to. - Define CONFIG_SYS_INIT_RAM_ADDR and CONFIG_SYS_INIT_RAM_SIZE They are used to define init RAM layout. - Remove comment for CONFIG_SYS_GBL_DATA_SIZE which has been buried by Wolfgang's commit below 25ddd1fb: Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value Signed-off-by: NShawn Guo <shawn.gsc@gmail.com>
-
由 Shawn Guo 提交于
This patch is to consolidate default mx51evk env for two primary boot modes, mmcboot and netboot. It also cleans some unused env like netdev, uboot and redundant env like loadaddr since CONFIG_LOADADDR already defines it. Signed-off-by: NShawn Guo <shawn.gsc@gmail.com>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
- 27 10月, 2010 3 次提交
-
-
由 Sughosh Ganu 提交于
Move CONFIG_SYS_TEXT_BASE to the board's config file, and remove the now unnecessary config.mk file. Signed-off-by: NSughosh Ganu <urwithsughosh@gmail.com> Tested-by: NBen Gardiner <bengardiner@nanometrics.ca>
-
由 Wolfgang Denk 提交于
CONFIG_SYS_GBL_DATA_SIZE has always been just a bad workarond for not being able to use "sizeof(struct global_data)" in assembler files. Recent experience has shown that manual synchronization is not reliable enough. This patch renames CONFIG_SYS_GBL_DATA_SIZE into GENERATED_GBL_DATA_SIZE which gets automatically generated by the asm-offsets tool. In the result, all definitions of this value can be deleted from the board config files. We have to make sure that all files that reference such data include the new <asm-offsets.h> file. No other changes have been done yet, but it is obvious that similar changes / simplifications can be done for other, related macro definitions as well. Signed-off-by: NWolfgang Denk <wd@denx.de> Acked-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Wolfgang Denk 提交于
CONFIG_SYS_INIT_RAM_END was a misnomer as it suggests this might be some end address; to make the meaning more clear we rename it into CONFIG_SYS_INIT_RAM_SIZE No other code changes are performed in this patch, only minor editing of white space (due to the changed length) and the comments was done, where noticed. Note that the code for the PATI and cmi_mpc5xx board configurations looks seriously broken. Last known maintainers on Cc: Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Denis Peter <d.peter@mpl.ch> Cc: Martin Winistoerfer <martinwinistoerfer@gmx.ch> Acked-by: NKumar Gala <galak@kernel.crashing.org>
-
- 26 10月, 2010 1 次提交
-
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
- 25 10月, 2010 1 次提交
-
-
由 Dirk Eibach 提交于
Board support for the Guntermann & Drunck CATCenter Io. Board support for the Guntermann & Drunck IoCon. Signed-off-by: NDirk Eibach <eibach@gdsys.de> Signed-off-by: NStefan Roese <sr@denx.de>
-
- 24 10月, 2010 2 次提交
-
-
由 Andre Schwarz 提交于
SICRH has been misconfigured, i.e. TSEC2 clock + D[0:3] are GPIOs. Fix this to be RGMII signals again. Signed-off-by: NAndre Schwarz <andre.schwarz@matrix-vision.de>
-
由 Ilya Yanok 提交于
This patch adds CONFIG_SYS_FLASH_BANKS_SIZES define to make use of new cfi_flash driver ability to detect flash chips that are bigger than a corresponding address window (we have such situation on some revs of a4m072). Signed-off-by: NIlya Yanok <yanok@emcraft.com>
-
- 22 10月, 2010 20 次提交
-
-
由 John Schmoller 提交于
Initial support for Extreme Engineering Solutions XPedite5500 - a P2020-based PMC/XMC single board computer. Signed-off-by: NJohn Schmoller <jschmoller@xes-inc.com> Signed-off-by: NPeter Tyser <ptyser@xes-inc.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Peter Tyser 提交于
Add memory and I2C posts to the XPedite517x/520x/537x board families. Signed-off-by: NPeter Tyser <ptyser@xes-inc.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Peter Tyser 提交于
Signed-off-by: NPeter Tyser <ptyser@xes-inc.com> Acked-by: NHeiko Schocher <hs@denx.de> Acked-by: NWolfgang Denk <wd@denx.de> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Peter Tyser 提交于
Some U-Boot images for X-ES boards support multiple products in the same family. For example, the XPedite5370, XPedite5371, and XPedite5372 are similar enough that one U-Boot image can work on all 3 cards. To make it clear that a U-Boot image can work on boards of the same family, rename the boards with the least significant digit of 'x'. While we're at it, change the board config file and make targets to be lowercase. Also change the default uImage and fdt filenames to "board.uImage" and "board.dtb" to be more generic. Signed-off-by: NPeter Tyser <ptyser@xes-inc.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 John Schmoller 提交于
Add board_flash_wp_on() to check a pca9557 gpio pin to see if non-volatile memory write protection is enabled. Previously, write protected NOR flashes would fail initialization which resulted in a bootup error such as: ... DTT: 53 C local / 64 C remote (adt7461@4c) DTT: 54 C local (ds1621@48) FLASH: Executed from FLASH1 POST memory PASSED FLASH: ## Unknown FLASH on Bank 1 - Size = 0x00000000 = 0 MB ## Unknown FLASH on Bank 2 - Size = 0x00000000 = 0 MB *** failed *** ### ERROR ### Please RESET the board ### With this patch, NOR flash initialization is skipped: ... DTT: 53 C local / 64 C remote (adt7461@4c) DTT: 54 C local (ds1621@48) FLASH: Executed from FLASH1 POST memory PASSED FLASH: Uninitialized - Write Protect On L2: 1024 KB enabled NAND: 1024 MiB ... Note that flash related commands such as flinfo and saveenv will error out when flash write protection is enabled. Signed-off-by: NJohn Schmoller <jschmoller@xes-inc.com> Signed-off-by: NPeter Tyser <ptyser@xes-inc.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 John Schmoller 提交于
Create a common checkboard() function to support all X-ES's Freescale boards. Also, add a get_board_derivative() function which reads hardware strapping resistors to determine what model a board is. This allows one U-Boot image to support multiple boards. Signed-off-by: NJohn Schmoller <jschmoller@xes-inc.com> Signed-off-by: NPeter Tyser <ptyser@xes-inc.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 John Schmoller 提交于
Add a new 'pci enum' command which re-enumerates the PCI buses. This command is enabled via the CONFIG_CMD_PCI_ENUM define and can be useful in boards with FPGAs connected via PCI/PCIe, boards that support PCI hot-plugging, or during PCI debug. Also enable the 'pci enum' command for X-ES's Freescale-based boards. Signed-off-by: NJohn Schmoller <jschmoller@xes-inc.com> Signed-off-by: NPeter Tyser <ptyser@xes-inc.com> Acked-by: NKumar Gala <galak@kernel.crashing.org> Acked-by: NWolfgang Denk <wd@denx.de>
-
由 Peter Tyser 提交于
Common Freescale code for PCI initialization now exists, so migrate X-ES boards to use it. Signed-off-by: NPeter Tyser <ptyser@xes-inc.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
The recent change the env code added an additional 32 bytes into gd_t and that causes to grow pass the previous CONFIG_SYS_GBL_DATA_SIZE size. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Marek Vasut 提交于
This board is broken and it's not possible to repair it. Signed-off-by: NMarek Vasut <marek.vasut@gmail.com>
-
由 Marek Vasut 提交于
This board is broken and impossible to repair without deep knowledge or availability of the hardware. Signed-off-by: NMarek Vasut <marek.vasut@gmail.com>
-
由 Marek Vasut 提交于
Signed-off-by: NMarek Vasut <marek.vasut@gmail.com>
-
由 Marek Vasut 提交于
Signed-off-by: NMarek Vasut <marek.vasut@gmail.com>
-
由 Marek Vasut 提交于
Signed-off-by: NMarek Vasut <marek.vasut@gmail.com>
-
由 Marek Vasut 提交于
Signed-off-by: NMarek Vasut <marek.vasut@gmail.com>
-
由 Marek Vasut 提交于
Signed-off-by: NMarek Vasut <marek.vasut@gmail.com>
-
由 Marek Vasut 提交于
Signed-off-by: NMarek Vasut <marek.vasut@gmail.com>
-
由 Marek Vasut 提交于
Signed-off-by: NMarek Vasut <marek.vasut@gmail.com>
-
由 Marek Vasut 提交于
Signed-off-by: NMarek Vasut <marek.vasut@gmail.com>
-
由 Marek Vasut 提交于
Signed-off-by: NMarek Vasut <marek.vasut@gmail.com>
-