This option isn't used for anything, so get rid of it.
Signed-off-by: NSam Protsenko <semen.protsenko@linaro.org>

Signed-off-by: NSam Protsenko <semen.protsenko@linaro.org>
[trini: Fix sniper and kc1 migration]
Signed-off-by: NTom Rini <trini@konsulko.com>

Patch queue for efi - 2016-11-17

Highlights this time around:

  - x86 efi_loader support
  - hello world efi test case
  - network device name is now representative
  - terminal output reports modes correctly
  - fix psci reset for ls1043/ls1046
  - fix efi_add_runtime_mmio definition for x86
  - efi_loader support for ls2080

Most new systems in U-Boot these days make use of the generic "distro"
framework which allows a user to have U-Boot scan for a bootable OS
on all available media types.

This patch extends the LS2080ARDB board to use that framework if the
hard coded NOR flash location does not contain a bootable image.
Signed-off-by: NAlexander Graf <agraf@suse.de>

When implementing efi loader support, we can expose runtime services
for payloads. One such service is CPU reset.

This patch implements RTS CPU reset support for layerscape systems.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NYork Sun <york.sun@nxp.com>

The efi loader code has its own memory map, so it needs to be aware where
the spin tables are located, to ensure that no code writes into those
regions.
Signed-off-by: NAlexander Graf <agraf@suse.de>

The DP-DDR shouldn't be exposed as conventional memory to an OS, so let's
rather claim it's a reserved region in the EFI memory map
Signed-off-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NYork Sun <york.sun@nxp.com>

On ls2080 we have a separate network fabric component which we need to
shut down before we enter Linux (or any other OS). Along with that also
comes configuration of the fabric using a description file.

Today we always stop and configure the fabric in the boot script and
(again) exit it on device tree generation. This works ok for the normal
booti case, but with bootefi the payload we're running may still want to
access the network.

So let's add a new fsl_mc command that defers configuration and stopping
the hardware to when we actually exit U-Boot, so that we can still use
the fabric from an EFI payload.

For existing boot scripts, nothing should change with this patch.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NYork Sun <york.sun@nxp.com>
[agraf: Fix x86 build]

The efi_add_runtime_mmio prototype for disabled CONFIG_EFI_LOADER
was different from the enabled one. Sync them.
Signed-off-by: NAlexander Graf <agraf@suse.de>

The NXP ls1043 and ls1046 systems do not (yet) have PSCI enablement
for reset. Don't enable generic PSCI reset code on them.
Signed-off-by: NAlexander Graf <agraf@suse.de>

Some boards decided not to run ATF or other secure firmware in EL3, so
they instead run U-Boot there. The uEFI spec doesn't know what EL3 is
though - it only knows about EL2 and EL1. So if we see that we're running
in EL3, let's get into EL2 to make payloads happy.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NYork Sun <york.sun@nxp.com>

The SinA33 comes with an optional 7" display. Enable it in the
configuration.
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: NHans de Goede <hdegoede@redhat.com>

The SinA33 has an 4GB Toshiba eMMC connected to the MMC2 controller.
Enable it.
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: NChen-Yu Tsai <wens@csie.org>
Reviewed-by: NHans de Goede <hdegoede@redhat.com>

The sun8i SoCs also have a 8 bits capable MMC2 controller. Enable the
support for those too.
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: NChen-Yu Tsai <wens@csie.org>
Reviewed-by: NHans de Goede <hdegoede@redhat.com>

Some eMMC will fail at the first switch, but would succeed in a subsequent
one.

Make sure we try several times to cover those cases. The number of retries
(and the behaviour) is currently what is being used in Linux.
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: NHans de Goede <hdegoede@redhat.com>
Reviewed-by: NTom Rini <trini@konsulko.com>

Adding prefetchable memory space to pcie device tree node.
Shifting configuration space to 64-bit address space.
Removing pcie device tree node from amba as it requires size-cells=<2>
in order to access 64-bit address space.
Signed-off-by: NBharat Kumar Gogada <bharatku@xilinx.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Zynqmp DMA driver expects two clocks (main clock and apb clock)
For LPDDMA channels the two clocks are missing in the
Dma node resulting probe failure.

xilinx-zynqmp-dma ffa80000.dma: main clock not found.
xilinx-zynqmp-dma ffa80000.dma: Probing channel failed
xilinx-zynqmp-dma: probe of ffa80000.dma failed with error -2

This patch fixes this issue.
Signed-off-by: NKedareswara rao Appana <appanad@xilinx.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

LPDDMA default allows only secured access.
inorder to enable these dma channels,
one should ensure that it allows non secure access.
This patch updates the same.
Reported-by: NSai Pavan Boddu <saipava@xilinx.com>
Signed-off-by: NKedareswara rao Appana <appanad@xilinx.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Use 64bit size cell for main amba bus instead of 32bit because PCIe
node requires it Change 64bit sizes also for all others IPs.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

This patch adds ocm controller node in zynqmp.dtsi.
needed for OCM edac support.
Signed-off-by: NNaga Sureshkumar Relli <nagasure@xilinx.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

This patch adds the ZynqMP GT core device-tree properties for
zynqmp.dtsi file.
Signed-off-by: NAnurag Kumar Vulisha <anuragku@xilinx.com>
Tested-by: NHyun Kwon <hyunk@xilinx.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

This reverts commit bd750e7a

Implemented the new workaround for auto tuning based on
zynqmp compatible string, so removed the 'broken-tuning'
property.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

This patch changes the compatible string for sdhci node,
adds "xlnx,device_id" and "xlnx,mio_bank" property to sdhci node.
Signed-off-by: NSai Krishna Potthuri <lakshmis@xilinx.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Add SMMU description for all tested IPs.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Add support for zynqmp fpga manager.
Signed-off-by: NNava kishore Manne <navam@xilinx.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

This patch adds edac node for arm cortexa53 to report
errors on L1 and L2 caches.
Signed-off-by: NNaga Sureshkumar Relli <nagasure@xilinx.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

This reverts commit 786db82b.

Since we are using serdes driver , no need of mapping serdes register
space into DP driver.
Signed-off-by: NAnurag Kumar Vulisha <anuragku@xilinx.com>
Tested-by: NHyun Kwon <hyunk@xilinx.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Each plane can be associated with multiple DMA channels. So add
index for each DMA channel.
Signed-off-by: NHyun Kwon <hyun.kwon@xilinx.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Keep dtsi in sync with mainline kernel.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Remove unused xlnx,id property because it is not the part of
DT binding.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Updating required device tree changes as per mainlined driver
from 4.6 kernel.
Signed-off-by: NBharat Kumar Gogada <bharatku@xilinx.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Previously, it was assumed that there is a 1:1 mapping between
PM ID defined in the platform firmware and a PM domain. However, there
can be a situation where multiple PM IDs belong to a single PM domain
(e.g. PM IDs for GPU and two pixel processors correspond to a single
PM domain).

This patch adds support for assigning more than one PM ID to
a single PM domain.

Updated documentation accordingly.

Assigned pixel processors PM IDs to GPU PM domain.
Signed-off-by: NFilip Drazic <filip.drazic@aggios.com>
Signed-off-by: NSoren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Signed-off-by: NFilip Drazic <filip.drazic@aggios.com>
Signed-off-by: NSoren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Signed-off-by: NFilip Drazic <filip.drazic@aggios.com>
Acked-by: NSoren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

DDR power states are handled by the PM firmware, so this domain is
redundant. Also, since there is no device using this PM domain,
it will be powered off during boot, which is wrong.
Signed-off-by: NFilip Drazic <filip.drazic@aggios.com>
Acked-by: NSoren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

i2c device is just level shifter. Remove reference from dts.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Add dcc to dtsi for supporting system without serial port.
DCC is enabled by default on ZynqMP.
Adding dcc to zcu100 and zcu102 which were tested.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

There is gpio push button on MIO22. Add it to DTS to have full board
description.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Show user that Linux is alive on the board.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>