- 10 1月, 2020 19 次提交
-
-
由 Holger Brunck 提交于
The M25P80 and M25P32 SPI flashes from Numonix/Micron will be replaced by Marconix MX25L80 and MX25L32 flashes. Signed-off-by: NHolger Brunck <holger.brunck@ch.abb.com> CC: Stefan Roese <sr@denx.de> CC: Valentin Longchamp <valentin.longchamp@ch.abb.com> Reviewed-by: NStefan Roese <sr@denx.de>
-
由 Holger Brunck 提交于
This target is out of maintenance and can be removed. Signed-off-by: NHolger Brunck <holger.brunck@ch.abb.com> CC: Stefan Roese <sr@denx.de> CC: Valentin Longchamp <valentin.longchamp@ch.abb.com> Reviewed-by: NStefan Roese <sr@denx.de>
-
由 Holger Brunck 提交于
For upcoming SECU board we have different MAC address offsets depending on which functional unit we are running. In this case we need to pass this value to the ivm_populate_env function instead of using the hard coded config option there. Signed-off-by: NHolger Brunck <holger.brunck@ch.abb.com> CC: Stefan Roese <sr@denx.de> CC: Valentin Longchamp <valentin.longchamp@ch.abb.com> CC: Marek Vasut <marex@denx.de> Reviewed-by: NStefan Roese <sr@denx.de>
-
由 Holger Brunck 提交于
This patch only fixes a typo. Signed-off-by: NHolger Brunck <holger.brunck@ch.abb.com> CC: Stefan Roese <sr@denx.de> CC: Valentin Longchamp <valentin.longchamp@ch.abb.com> Reviewed-by: NStefan Roese <sr@denx.de>
-
由 Frank Wunderlich 提交于
this adds poweroff to bananapi r2 / mt7623 / mt6323 pmic Signed-off-by: NFrank Wunderlich <frank-w@public-files.de>
-
由 Han Nandor 提交于
DS3232 is an i2c RTC with 236 bytes of battery-backed SRAM. Add an RTC driver for DS3232 device, which provides time and date support. Also read and write functions are provided, which can be used to access the SRAM memory. Signed-off-by: NNandor Han <nandor.han@vaisala.com>
-
由 Simon Goldschmidt 提交于
Most platforms do not set up gd->start_addr_sp in SPL. Since this is required for CONFIG_SPL_SYS_REPORT_SACK_F_USAGE to work correctly, set up gd->start_addr_sp in SPL to the value passed to board_init_f_init_reserve if it is not set yet. Fixes: d8c03320 ("spl: implement stack usage check") Signed-off-by: NSimon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
-
由 Tom Rini 提交于
All platforms currently use the "MCFTMR" DMA timer rather than the PIT timer, so drop the MCFPIT code. Cc: Huan Wang <alison.wang@nxp.com> Cc: Angelo Dureghello <angelo@sysam.it> Cc: TsiChung Liew <Tsi-Chung.Liew@nxp.com> Cc: Wolfgang Wegner <w.wegner@astro-kom.de> Signed-off-by: NTom Rini <trini@konsulko.com> Reviewed-by: NAngelo Dureghello <angelo@sysam.it>
-
由 Robert Beckett 提交于
This driver allows the use of i2c eeprom device or partition as backing store for boot counter values with DM enabled. Signed-off-by: NRobert Beckett <bob.beckett@collabora.com>
-
由 Angelo Durgehello 提交于
Add specific dm code, but maintaining this driver as is, so more in the shape of a mii library. Can be moved to dm in a further step. Signed-off-by: NAngelo Durgehello <angelo.dureghello@timesys.com>
-
由 Angelo Durgehello 提交于
Full conversion to dm for all boards, legacy code removed. Signed-off-by: NAngelo Durgehello <angelo.dureghello@timesys.com>
-
由 Angelo Durgehello 提交于
Full conversion to dm for all boards, legacy code removed. Signed-off-by: NAngelo Durgehello <angelo.dureghello@timesys.com>
-
由 Angelo Durgehello 提交于
Add ColdFire fec to Kconfig. Signed-off-by: NAngelo Durgehello <angelo.dureghello@timesys.com>
-
由 Angelo Durgehello 提交于
Add architecture-related code for dm fec support. Signed-off-by: NAngelo Durgehello <angelo.dureghello@timesys.com>
-
由 Angelo Durgehello 提交于
Remove unneeded fec-related defines after fec moved as dm. Signed-off-by: NAngelo Durgehello <angelo.dureghello@timesys.com>
-
由 Angelo Durgehello 提交于
Add dm eth config options for all involved ColdFire-based boards. Signed-off-by: NAngelo Durgehello <angelo.dureghello@timesys.com>
-
由 Angelo Durgehello 提交于
Add ethernet controller overrides for all involved boards. Signed-off-by: NAngelo Durgehello <angelo.dureghello@timesys.com>
-
由 Angelo Durgehello 提交于
Add basic ethernet controller devicetree nodes for all ColdFire families. Signed-off-by: NAngelo Durgehello <angelo.dureghello@timesys.com>
-
https://gitlab.denx.de/u-boot/custodians/u-boot-mpc83xx由 Tom Rini 提交于
- A small PR with MC8309 fixes from Rasmus.
-
- 09 1月, 2020 10 次提交
-
-
git://git.denx.de/u-boot-dm由 Tom Rini 提交于
dm: Increased separation of ofdata_to_platdata() and probe methods
-
-
https://gitlab.denx.de/u-boot/custodians/u-boot-efi由 Tom Rini 提交于
Pull request for UEFI sub-system for efi-2020-04-rc1 This pull request provides: * support for FIT images for UEFI binaries * drivers for hardware random number generators * an implementation of the EFI_RNG_PROTOCOL * a sub-command for efidebug to display configuration tables
-
https://gitlab.denx.de/u-boot/custodians/u-boot-uniphier由 Tom Rini 提交于
UniPhier SoC updates for v2020.04 - add pinmux nodes for I2C ch5, ch6 - enable SPI driver and command
-
https://gitlab.denx.de/u-boot/custodians/u-boot-imx由 Tom Rini 提交于
```------------------------------------------------------------------ Add i.MX8MP SoC and EVK board Update README for i.MX8MN EVK and fix mmc env Add pca9450 driver ``` ----------------------------------------------------------------- Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/634211885
-
-
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic由 Tom Rini 提交于
- Khadas VIM3L based on Amlogic S905D3 support - Various fixups for amlogic boards - Unnecessary header includes drop into video/meson
-
由 Tom Rini 提交于
- DT overlay support in FIT images in SPL - remoteproc update - Assorted SATA fixes - Other assorted fixes
-
由 Masahiro Yamada 提交于
Compile drivers/spi/uniphier_spi.c and cmd/spi.c Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
The next generation SoC can connect on-board slave devices via I2C ch5 and ch6. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
- 08 1月, 2020 11 次提交
-
-
由 Peng Ma 提交于
In the initialization of sata driver, we want to initialize all port probes, Therefore, any detection failure between of them should continue initialization by skipping the current port instead of exit. Signed-off-by: NPeng Ma <peng.ma@nxp.com>
-
由 Peng Ma 提交于
In the initialization of sata driver, we want to initialize all port probes, Therefore, any detection failure between of them should continue initialization by skipping the current port instead of exit. Signed-off-by: NPeng Ma <peng.ma@nxp.com>
-
由 Patrice Chotard 提交于
As previous CONFIG_SYS_UBOOT_START is now set by default to CONFIG_SYS_TEXT_BASE when not defined, CONFIG_SYS_UBOOT_START can be removed from include/configs board files. Signed-off-by: NPatrice Chotard <patrice.chotard@st.com> Acked-by: NLukasz Majewski <lukma@denx.de>
-
由 Patrice Chotard 提交于
This patches restores boot on boards which rely on CONFIG_SYS_UBOOT_START equal to CONFIG_SYS_TEXT_BASE when using SPL Fixes: d3e97b53 ("spl: fix entry_point equal to load_addr") Signed-off-by: NPatrice Chotard <patrice.chotard@st.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Tom Rini 提交于
Per Enea OSE documentation, it supports some classes of ARM, PowerPC and X86. Limit the option to those platforms. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Peng Fan 提交于
enable CONFIG_CMD_ERASEENV to make it easy to erase env. Use savedefconfig to generate new defconfig. Reviewed-by: NFabio Estevam <festevam@gmail.com> Signed-off-by: NPeng Fan <peng.fan@nxp.com>
-
由 Peng Fan 提交于
Add board_mmc_get_env_dev, otherwise, Loading Environment from MMC... MMC Device 0 not found *** Warning - No MMC card found, using default environment Reviewed-by: NFabio Estevam <festevam@gmail.com> Signed-off-by: NPeng Fan <peng.fan@nxp.com>
-
由 Peng Fan 提交于
Add a README for users to build a workable image. Reviewed-by: NFabio Estevam <festevam@gmail.com> Signed-off-by: NPeng Fan <peng.fan@nxp.com>
-
由 Peng Fan 提交于
Add basic i.MX8MP EVK board support U-Boot SPL 2020.01-rc4-00388-gb1bf40c0ae-dirty (Dec 30 2019 - 17:55:33 +0800) power_pca9450b_init DDRINFO: start DRAM init DDRINFO:ddrphy calibration done DDRINFO: ddrmix config done Normal Boot Failed to find clock node. Check device tree WDT: Not found! Trying to boot from BOOTROM image offset 0x8000, pagesize 0x200, ivt offset 0x0 U-Boot 2020.01-rc4-00388-gb1bf40c0ae-dirty (Dec 30 2019 - 17:55:33 +0800) CPU: Freescale i.MX8MP rev1.0 at 1000 MHz Reset cause: POR Model: NXP i.MX8MPlus EVK board DRAM: 6 GiB MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 0 u-boot=> mmc list FSL_SDHC: 1 (SD) FSL_SDHC: 2 Signed-off-by: NPeng Fan <peng.fan@nxp.com>
-
由 Peng Fan 提交于
Add imximage-8mp-lpddr4.cfg for imximage usage, almost same as i.MX8MN ddr4 cfg, but with different ddr firmware Signed-off-by: NPeng Fan <peng.fan@nxp.com>
-
由 Peng Fan 提交于
Add i.MX8MP clk driver for i.MX8MP CLK driver model usage Signed-off-by: NPeng Fan <peng.fan@nxp.com>
-