- 23 11月, 2011 8 次提交
-
-
由 Anatolij Gustschin 提交于
Fix: syncflash.c: In function 'SF_SR': syncflash.c:60:10: warning: variable 'tmp1' set but not used [-Wunused-but-set-variable] syncflash.c: In function 'SF_PrechargeAll': syncflash.c:96:6: warning: variable 'tmp' set but not used [-Wunused-but-set-variable] mx1ads.c: In function 'board_early_init_f': mx1ads.c:83:24: warning: variable 'tmp' set but not used [-Wunused-but-set-variable] syncflash.c: In function 'SF_Erase': syncflash.c:112:6: warning: variable 'tmp' set but not used [-Wunused-but-set-variable] syncflash.c: In function 'flash_init': syncflash.c:155:6: warning: variable 'tmp' set but not used [-Wunused-but-set-variable] Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
由 Anatolij Gustschin 提交于
Fix: flash.c: In function 'flash_erase': flash.c:223:6: warning: variable 'flag' set but not used [-Wunused-but-set-variable] flash.c: In function 'write_data': flash.c:392:6: warning: variable 'flag' set but not used [-Wunused-but-set-variable] Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
由 Anatolij Gustschin 提交于
Fix: cs8900.c: In function 'get_reg_init_bus': cs8900.c:69:14: warning: variable 'c' set but not used [-Wunused-but-set-variable] Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
由 Anatolij Gustschin 提交于
Fix: cpuinfo.c: In function 'print_cpuinfo': cpuinfo.c:155:6: warning: variable 'system_serial_low' set but not used [-Wunused-but-set-variable] cpuinfo.c:154:6: warning: variable 'system_serial_high' set but not used [-Wunused-but-set-variable] Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
由 Anatolij Gustschin 提交于
Fix: lan91c96.c: In function 'dump_memory_info': lan91c96.c:157:7: warning: variable 'mem_info' set but not used [-Wunused-but-set-variable] lan91c96.c: In function 'smc_send_packet': lan91c96.c:320:16: warning: variable 'ioaddr' set but not used [-Wunused-but-set-variable] Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
由 Anatolij Gustschin 提交于
Fix: pm9263.c: In function 'pm9263_lcd_hw_psram_init': pm9263.c:167:20: warning: variable 'x' set but not used [-Wunused-but-set-variable] Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
由 Anatolij Gustschin 提交于
Fix: samsung.c: In function 's3c_onenand_check_lock_status': samsung.c:486:6: warning: variable 'tmp' set but not used [-Wunused-but-set-variable] Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
由 Anatolij Gustschin 提交于
Fix: musb_hcd.c: In function 'submit_control_msg': musb_hcd.c:851:6: warning: variable 'csr' set but not used [-Wunused-but-set-variable] Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
- 08 11月, 2011 32 次提交
-
-
git://git.denx.de/u-boot-mpc83xx由 Wolfgang Denk 提交于
* 'master' of git://git.denx.de/u-boot-mpc83xx: powerpc/mpc83xx: Add 33.33MHz support for mpc8360emds powerpc/mpc83xx: Add 512MB DDR support for mpc8360emds mpc83xx: Rename CONFIG_SYS_DDR_CONFIG and cleanup DDR csbnds code mpc83xx: Cleanup usage of LBC constants mpc83xx: Cleanup usage of DDR constants mpc83xx: Cleanup usage of BAT constants mpc83xx: cosmetic: vme8349.h checkpatch compliance mpc83xx: cosmetic: ve8313.h checkpatch compliance mpc83xx: cosmetic: sbc8349.h checkpatch compliance mpc83xx: cosmetic: mpc8308_p1m.h checkpatch compliance mpc83xx: cosmetic: kmeter1.h checkpatch compliance mpc83xx: cosmetic: TQM834x.h checkpatch compliance mpc83xx: cosmetic: SIMPC8313.h checkpatch compliance mpc83xx: cosmetic: MVBLM7.h checkpatch compliance mpc83xx: cosmetic: MPC837XERDB.h checkpatch compliance mpc83xx: cosmetic: MPC837XEMDS.h checkpatch compliance mpc83xx: cosmetic: MPC8360ERDK.h checkpatch compliance mpc83xx: cosmetic: MPC8360EMDS.h checkpatch compliance mpc83xx: cosmetic: MPC8349ITX.h checkpatch compliance mpc83xx: cosmetic: MPC8349EMDS.h checkpatch compliance mpc83xx: cosmetic: MPC832XEMDS.h checkpatch compliance mpc83xx: cosmetic: MPC8323ERDB.h checkpatch compliance mpc83xx: cosmetic: MPC8315ERDB.h checkpatch compliance mpc83xx: cosmetic: MPC8313ERDB.h checkpatch compliance mpc83xx: cosmetic: MPC8308RDB.h checkpatch compliance mpc83xx: cosmetic: MERGERBOX.h checkpatch compliance mpc83xx: Fix ipic structure definition powerpc, mpc83xx: add DDR SDRAM Timing Configuration 3 definitions cosmetic, powerpc, mpc83xx: checkpatch cleanup powerpc/83xx: move km 83xx specific i2c code to km83xx_i2c mpc83xx: fix global timer structure definition
-
由 Jerry Huang 提交于
The new MPC8360EMDS board changes the oscillator to 33.33MHz in order to support QE 500MHz since 2008. Signed-off-by: NJerry Huang <Chang-Ming.Huang@freescale.com> Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
-
git://git.denx.de/u-boot-arm由 Wolfgang Denk 提交于
* 'master' of git://git.denx.de/u-boot-arm: Arm: re-introduce the MACH_TYPE_XXXXXX for EB_CPUX9K2 board arm: jadecpu: Readd MACH_TYPE_JADECPU at91: defined mach-types for otc570 board in board config file at91: defined mach-types for meesc board in board config file mx31pdk: Enable D and I caches ehci-mxc: remove incorrect comment README: Fix supported i.MX SoC list for CONFIG_MXC_SPI mx53: Turn off child clocks before reconfigure perclk_root qong: enable support for compressed images imx: imx31_phycore.h: fix checkpatch warnings vision2: Remove unused get_board_rev function mx53smd: Remove unused get_board_rev function mx53ard: Remove unused get_board_rev function mx53evk: Remove unused get_board_rev function mx53evk: Add RTC support mx53loco: Remove unused get_board_rev function mx53evk: Remove unneeded '1' from mx53evk.h OMAP3: mvblx: Initial support for mvBlueLYNX-X ARM: dig297: Define MACH_TYPE_OMAP3_CPS and CONFIG_MACH_TYPE omap3: mem: Move comments next to definitions omap3: mem: Clean-up whitespaces omap3: mem: Define and use common macros Davinci: ea20: added PREBOOT to configuration Davinci: ea20: added I2C support Davinci: ea20: added video support VIDEO: davinci: add framebuffer to da8xx ARM: Davinci: added missing registers to hardware.h Davinci: ea20: add gpios for LCD backlight control Davinci: ea20: add gpio for keeping power on in board_late_init Davinci: ea20: Add default U-Boot environment Davinci: ea20: Add early init to get early output from console Davinci: ea20: Add NAND support Davinci: ea20: set GPIOs to hold MII-Phy in reset and set UART0-Switch for console Davinci: ea20: set console on UART0 arm, davinci: add cam_enc_4xx support arm926ejs, davinci: add missing spi defines for dm365 arm926ejs, davinci: add cpuinfo for dm365 arm, davinci: add lowlevel function for dm365 soc arm, davinci: add header files for dm365 spl, nand: add 4bit HW ecc oob first nand_read_page function arm, davinci: add support for new spl framework spl: add option for adding post memory test to the SPL framework net, davinci_emac: make clock divider in MDIO control register configurable arm, usb, davinci: make USBPHY_CTL register configurable usb, davinci: add enable_vbus() weak function omap3evm: fix errors caused by multiple definitions omap3evm: Add (quick) configuration for NAND only omap3evm: Add (quick) configuration for MMC/SD only omap3evm: move common config options to new file omap3evm: Prepare to split configuration omap3evm: Reorder related config options omap/spl: actually enable the console davinci_emac: compilation fix, phy is array now omap3evm: Set environment variable 'ethaddr' arm, arm926: fix missing symbols in NAND_SPL mode arm, davinci: Add function lpsc_syncreset() arm, davinci: replace CONFIG_PRELOADER with CONFIG_SPL_BUILD arm/km: portl2 environment address update to P1B arm/km: adapt bootcounter evaluation arm/km: enable jffs2 cmds arm/km: trigger reconfiguration for the Xilinx FPGA arm/km: add boardid and hwkey to kernel command line ARM: Reintroduce MACH_TYPE_KM_KIRKWOOD for keymile ARM boards netspace_v2: enable I2C EEPROM support netspace_v2: fix SDRAM configuration armada100: define CONFIG_SYS_CACHELINE_SIZE pantheon: define CONFIG_SYS_CACHELINE_SIZE kirkwood: define CONFIG_SYS_CACHELINE_SIZE kirkwood: drop empty asm-offsets.s file arm/km/mgcoge3un: enhance "waitforne" feature arm/km: add variable waitforne to mgcoge3un gplugD: Fix for error:MACH_TYPE_SHEEVAD undeclared ARM: dreamplug: fix compilation ARM: DockStar: fix compilation ARM: netspace_v2: fix warnings am335x: Drop board_sysinfo struct am335x: Temporarily add MACH_TYPE define misc:pmic:samsung Enable PMIC driver at C210 Universal target dcache:s5p CONFIG_SYS_CACHELINE_SIZE added for s5p UNIVERSAL C210 target dcache:s5p CONFIG_SYS_CACHELINE_SIZE added for s5p GONI target smdkv310: use macro for mmc data read function address smdkv310: use spl framework for mmc spl SMDKV310: use get_ram_size() to validate dram size SMDKV310: Initialize board id using CONFIG_MACH_TYPE ORIGEN : use absolute paths and fix tool naming ORIGEN : enable device tree support MX25: tx25: Fix building due to missing MACH_TYPE mx31: Add board support for HALE TT-01 mx31: add ESD control registers mx31: define pins and init for UART2 and CSPI3 MX35: add support for flea3 board MX51: vision2: add MACH_TYPE in config file vision2: Remove unused header file mx51evk: Remove unused get_board_rev function mx51evk: Remove unneeded '1' from mx51evk.h I2C: Fix mxc_i2c.c problem on imx31_phycore mx35pdk: Add RTC support mx51evk: Use GPIO API for configuring the IOMUX mx51evk: Add RTC support rtc: Make mc13783-rtc driver generic qong: remove unneeded IOMUX settings qong: Use mx31_set_gpr to setup USBH2 pins mx31: Introduce mx31_set_gpr function mx31pdk: Add MC13783 PMIC support qong: remove unneeded "1" from qong.h misc: pmic: fix regression in pmic_fsl.c (SPI) mx5 configs: CONFIG_PRIME should really be CONFIG_ETHPRIME MX35: Drop unnecessary prototypes from imx-regs.h I2C: added I2C-2 and I2C-3 to MX35 MX35: factorize common assembly code MX35: add reset cause as provided by other i.MX MX35: add pins definition for UART3 MX35: added ESDC structure to imx-regs
-
git://git.denx.de/u-boot-coldfire由 Wolfgang Denk 提交于
* 'master' of git://git.denx.de/u-boot-coldfire: ColdFire: The EB+MCF-EV123 boards config update ColdFire: Fix the compile issue for M52277 ColdFire:Moving the remaining coldfire boards to boards.cfg
-
git://git.denx.de/u-boot-i2c由 Wolfgang Denk 提交于
* 'master' of git://git.denx.de/u-boot-i2c: Powerpc/i2c: Use the same initialize codes
-
由 Wolfgang Denk 提交于
Fix: scm.c: In function 'config_scoh_cs': scm.c:400:16: warning: variable 'tmp' set but not used [-Wunused-but-set-variable] Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
Fix: vovpn-gw.c: In function 'misc_init_r': vovpn-gw.c:266:16: warning: variable 'temp' set but not used [-Wunused-but-set-variable] Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
Fix: mpc8266ads.c: In function 'initdram': mpc8266ads.c:278:9: warning: variable 'spd_size' set but not used [-Wunused-but-set-variable] Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
Make (mostly) checkpatch clean. Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Rune Torgersen <runet@innovsys.com>
-
由 Wolfgang Denk 提交于
Fix: sacsng.c: In function 'initdram': sacsng.c:180:9: warning: variable 'spd_size' set but not used [-Wunused-but-set-variable] Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Jerry Van Baren <gerald.vanbaren@smiths-aerospace.com>
-
由 Wolfgang Denk 提交于
Make (mostly) checkpatch clean. Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Jerry Van Baren <gerald.vanbaren@smiths-aerospace.com>
-
由 Wolfgang Denk 提交于
Fix: flash.c: In function 'flash_init': flash.c:52:19: warning: variable 'size' set but not used [-Wunused-but-set-variable] Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
Really minimal and local, just good enough to make checkpatch not complain about the changes in the following commit. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
Fix: ids8247.c: In function 'initdram': ids8247.c:284:14: warning: variable 'lsize' set but not used [-Wunused-but-set-variable] Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Heiko Schocher <hs@denx.de>
-
由 Wolfgang Denk 提交于
Fix: input.c: In function 'hymod_get_ethaddr': input.c:79:10: warning: variable 'ea' set but not used [-Wunused-but-set-variable] Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Murray Jensen <Murray.Jensen@csiro.au>
-
由 Wolfgang Denk 提交于
Fix: ep82xxm.c: In function 'initdram': ep82xxm.c:233:16: warning: variable 'ramtmp' set but not used [-Wunused-but-set-variable] Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
Fix: flash.c: In function 'flash_init': flash.c:81:16: warning: variable 'size' set but not used [-Wunused-but-set-variable] Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Oliver Brown <obrown@adventnetworks.com>
-
由 Wolfgang Denk 提交于
Really minimal and local, just good enough to make checkpatch not complain about the changes in the following commit. Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Oliver Brown <obrown@adventnetworks.com>
-
由 Wolfgang Denk 提交于
Fix: flash.c: In function 'flash_init': flash.c:295:16: warning: variable 'fip' set but not used [-Wunused-but-set-variable] Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Murray Jensen <Murray.Jensen@csiro.au>
-
由 Wolfgang Denk 提交于
Fix: spi.c: In function 'spi_init_r': spi.c:279:22: warning: variable 'cp' set but not used [-Wunused-but-set-variable] spi.c: In function 'spi_xfer': spi.c:361:22: warning: variable 'cp' set but not used [-Wunused-but-set-variable] Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
Fix: cmd_flash.c:355:32: warning: 'info' may be used uninitialized in this function [-Wuninitialized] cmd_flash.c:354:10: warning: 'sect_first' may be used uninitialized in this function [-Wuninitialized] cmd_flash.c:354:10: warning: 'sect_last' may be used uninitialized in this function [-Wuninitialized] cmd_flash.c: In function 'do_protect': cmd_flash.c:540:9: warning: 'info' may be used uninitialized in this function [-Wuninitialized] cmd_flash.c:538:9: warning: 'sect_first' may be used uninitialized in this function [-Wuninitialized] cmd_flash.c:538:9: warning: 'sect_last' may be used uninitialized in this function [-Wuninitialized] Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
Fix: rtl8139.c: In function 'rtl8139_probe': rtl8139.c:256:15: warning: variable 'fullduplex' set but not used [-Wunused-but-set-variable] rtl8139.c:256:6: warning: variable 'speed10' set but not used [-Wunused-but-set-variable] rtl8139.c: In function 'rtl_transmit': rtl8139.c:419:16: warning: variable 'txstatus' set but not used [-Wunused-but-set-variable] Change code to use new debug macros; also fix the new errors and warnigns popping up now, like "error: 'to' undeclared" and some "warning: format '%X' expects argument of type 'unsigned int', but argument X has type 'long unsigned int'" Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
Fix: ide.c: In function 'ide_preinit': ide.c:69:21: warning: array subscript is above array bounds [-Warray-bounds] ide.c:69:21: warning: array subscript is above array bounds [-Warray-bounds] ide.c:70:17: warning: array subscript is above array bounds [-Warray-bounds] Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Reviewed-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
-
由 Wolfgang Denk 提交于
Fix: rtl8169.c: In function 'rtl_init': rtl8169.c:742:13: warning: variable 'printed_version' set but not used [-Wunused-but-set-variable] Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
Fix: flash.c: In function 'flash_erase': flash.c:780:18: warning: variable 'l_sect' set but not used [-Wunused-but-set-variable] flash.c:779:11: warning: variable 'addr' set but not used [-Wunused-but-set-variable] Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Sangmoon Kim <dogoil@etinsys.com>
-
由 Wolfgang Denk 提交于
Fix: pcnet.c: In function 'pcnet_probe': pcnet.c:247:8: warning: variable 'chipname' set but not used [-Wunused-but-set-variable] Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Wolfgang Grandegger <wg@denx.de>
-
由 Wolfgang Denk 提交于
Fix: flash.c: In function 'flash_erase': flash.c:409:21: warning: variable 'last' set but not used [-Wunused-but-set-variable] flash.c:408:6: warning: variable 'flag' set but not used [-Wunused-but-set-variable] flash.c: In function 'write_data': flash.c:669:6: warning: variable 'flag' set but not used [-Wunused-but-set-variable] flash.c: In function 'write_data_block': flash.c:709:6: warning: variable 'flag' set but not used [-Wunused-but-set-variable] Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
Fix: bat_rw.c: In function 'write_bat': bat_rw.c:38:6: warning: variable 'batn' set but not used [-Wunused-but-set-variable] Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Andy Fleming <afleming@gmail.com>
-
由 Wolfgang Denk 提交于
Fix: i2c.c: In function 'wait_for_bb': i2c.c:109:16: warning: variable 'temp' set but not used [-Wunused-but-set-variable] Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Heiko Schocher <hs@denx.de>
-
由 Wolfgang Denk 提交于
This also fixes some GCC 4.6 build warnings like: i2c.c: In function 'i2c_init': i2c.c:221:26: warning: variable 'txbd' set but not used [-Wunused-but-set-variable] i2c.c:221:19: warning: variable 'rxbd' set but not used [-Wunused-but-set-variable] Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Heiko Schocher <hs@denx.de>
-
由 Wolfgang Denk 提交于
Make (mostly) checkpatch clean (don't convert to use I/O accessors yet, so there will be "Use of volatile is usually wrong" warnings left. Also accept some other harmless checkpatch warnings. Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Heiko Schocher <hs@denx.de>
-