- 14 9月, 2013 1 次提交
-
-
- 12 9月, 2013 3 次提交
-
-
由 Tom Rini 提交于
After further testing, this patch has two problems. First, examples/standalone/Makefile was already inherting PLATFORM_LIBS from the top-level Makefile so this lead to duplicating the private libgcc. Second, currently the private libgcc has a reference to 'hang' that is not being fulfilled. This reverts commit 4412db46. Signed-off-by: NTom Rini <trini@ti.com>
-
由 Albert ARIBAUD 提交于
Put all informations about targets, including state (active or orphan) and maintainers, in boards.cfg; remove MAINTAINERS; adjust the build system accordingly. Signed-off-by: NAlbert ARIBAUD <albert.u.boot@aribaud.net>
-
-
- 11 9月, 2013 6 次提交
-
-
由 Albert ARIBAUD 提交于
Conflicts: tools/Makefile
-
由 Przemyslaw Marczak 提交于
This change allow to use sd card on Goni the same like mmc 0. SD card is mmc dev 1, so it can be used like this: "fatls mmc 1:2". SD card is inited even if eMMC initialization fails. Signed-off-by: NPrzemyslaw Marczak <p.marczak@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> CC: Minkyu Kang <mk7.kang@samsung.com> Acked-by: NJaehoon Chung <jh80.chung@samsung.com> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Przemyslaw Marczak 提交于
On s5pc1xx mmc devices offset is multiply of 0x100000, wrong value was 0x10000. Register offset always points to mmc 0 before this change. Add macro definition of mmc dev register offset to s5pc1xx and exynos mmc. Signed-off-by: NPrzemyslaw Marczak <p.marczak@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> CC: Minkyu Kang <mk7.kang@samsung.com> Acked-by: Jaehoon Chung <jh80.chung at samsung.com> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Chander Kashyap 提交于
As per new convention ARCH_CPU_DTS is not defined in "dtc/Makefile". Hence Arndale comilation is failing. Fix this by adding proper include file in "board/samsung/dts/exynos5250-arndale.dts". Signed-off-by: NChander Kashyap <chander.kashyap@linaro.org> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 York Sun 提交于
In a very rare condition, a system hang is possible when the e500 core initiates a guarded load to PCI / PCIe /SRIO performs a coherent write to memory. Please refer to errata document for more details. This erratum applies to the following SoCs and their variants, if any. BSC9132 BSC9131 MPC8536 MPC8544 MPC8548 MPC8569 MPC8572 P1010 P1020 P1021 P1022 P1023 P2020 C29x Signed-off-by: NYork Sun <yorksun@freescale.com> CC: Scott Wood <scottwood@freescale.com>
-
由 Shaohui Xie 提交于
Without this patch, SPD access will fail which leads to DDR init fail. Signed-off-by: NShaohui Xie <Shaohui.Xie@freescale.com> Tested-by: NChris Packham <judge.packham@gmail.com> Acked-by: NYork Sun <yorksun@freescale.com>
-
- 09 9月, 2013 4 次提交
-
-
-
-
由 Tang Yuantian 提交于
The source clock frequency of I2C bus on p1022 is the platform(CCB) clock, not CCB/2. The wrong source clock frequency leads to wrong I2C bus speed setting. so, fixed it. Signed-off-by: NTang Yuantian <Yuantian.Tang@freescale.com>
-
由 Ying Zhang 提交于
- Added section "u_boot_list" in arch/powerpc/cpu/mpc85xx/u-boot-spl.lds - Use the function i2c_init_all instead of i2c_init Signed-off-by: NYing Zhang <b40530@freescale.com>
-
- 07 9月, 2013 20 次提交
-
-
由 Stefan Roese 提交于
LCD4 needs a slightly different GPIO configuration than the original LWMON5 variant. GPIO49 needs to be configured to a default output value of 0 (permanent voltage supply). Additionally lcd4 also needs to enable the LSB transmitter. Signed-off-by: NStefan Roese <sr@denx.de>
-
-
由 Masahiro Yamada 提交于
For most boards which define CONFIG_SPL_PAD_TO, it is defined in config header files. Currently, there exists only one exception, cam_enc_4xx board. This patch moves CONFIG_SPL_PAD_TO definition from board/ait/cam_enc_4xx/config.mk to include/configs/cam_enc_4xx.h. With this modification, we can delete a glue code in the top level config.mk: ifneq ($(CONFIG_SPL_PAD_TO),) CPPFLAGS += -DCONFIG_SPL_PAD_TO=$(CONFIG_SPL_PAD_TO) endif Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Heiko Schocher <hs@denx.de>
-
由 Masahiro Yamada 提交于
Currently no makefiles (board-specific config.mk) set the following variables: CONFIG_SPL_TEXT_BASE CONFIG_UBOOT_PAD_TO CONFIG_RESET_VECTOR_ADDRESS CONFIG_TPL_PAD_TO For all target boards using above macros they are set in header files (include/configs/*.h), so we do not need to set them as CPPFLAGS. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Oliver Metz 提交于
Signed-off-by: NOliver Metz <oliver@freetz.org> Tested-by: NLuka Perkov <luka@openwrt.org>
-
由 Oliver Metz 提交于
Signed-off-by: NOliver Metz <oliver@freetz.org> Tested-by: NLuka Perkov <luka@openwrt.org>
-
由 Marek Vasut 提交于
Fix my email address. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Tom Rini <trini@ti.com>
-
由 Henrik Nordström 提交于
Use of uImage formatted u-boot have long been preferred, and recent changes to better support Falcon mode on MMC now enforces it on MMC. Signed-off-by: NHenrik Nordstrom <henrik@henriknordstrom.net>
-
由 Rob Herring 提交于
libata already has similar functions as implemented in the ahci code. Refactor the code to use the libata variants and remove the dependency on ata.h. Convert some defines to use the version from libata.h. Also, remove some unnecessary memset's of bss data. This is a step toward hopefully merging ahci.c and dw_ahsata.c which are essentially the same driver. Signed-off-by: NRob Herring <rob.herring@calxeda.com> Reviewed-by: NTom Rini <trini@ti.com>
-
由 Rob Herring 提交于
Based on Linux libata code, most drives are less than 10 sec, but some need up to 20 sec. Signed-off-by: NRob Herring <rob.herring@calxeda.com> Reviewed-by: NTom Rini <trini@ti.com>
-
由 Rob Herring 提交于
Some Intel SSDs can send a COMINIT after the initial COMRESET. This causes the link to go down and we need to re-initialize the link. Signed-off-by: NRob Herring <rob.herring@calxeda.com>
-
由 Rob Herring 提交于
Move the link bring-up handling to a separate weak function in order to allow platforms to override it. This is needed on highbank platform which needs special phy handling. Signed-off-by: NRob Herring <rob.herring@calxeda.com>
-
由 Rob Herring 提交于
Replace hard-coded register values with proper defines for PORT_SCR_STAT register. Signed-off-by: NRob Herring <rob.herring@calxeda.com>
-
由 Rob Herring 提交于
This fixes a memory leak when scsi inquiry fails. Signed-off-by: NRob Herring <rob.herring@calxeda.com> Reviewed-by: NTom Rini <trini@ti.com>
-
由 Rob Herring 提交于
gcc 4.7 will generate unaligned accesses to local char arrays, so make them static to avoid that. Signed-off-by: NRob Herring <rob.herring@calxeda.com> Reviewed-by: NTom Rini <trini@ti.com>
-
由 Richard Gibbs 提交于
The AHCI driver was incorrectly using the Capabilities register NP (number of ports) field to determine which ports to activate. This commit changes it to correctly use the PORTS_IMPL register as a port map. Signed-off-by: NRichard Gibbs <richard.gibbs@calxeda.com> Reviewed-by: NTom Rini <trini@ti.com>
-
由 Jack Mitchell 提交于
Add support for defining the gcc lib in standalone examples as is done in the main u-boot Makefile Signed-off-by: NJack Mitchell <jack.mitchell@dbbroadcast.co.uk>
-
由 Wu, Josh 提交于
In the set_cluster() function, it will convert the buffer size to sector numbers. Then call disk_write() to write by sector. For remaining buffer, the size is less than a sector, call disk_write() again to write them in one sector. But if the total buffer size is less then one sector, the original code will call disk_write() with zero sector number. It is unnecessary. So this patch fix this. Now it will not call disk_write() if total buffer size is less than one sector. Signed-off-by: NJosh Wu <josh.wu@atmel.com>
-
由 Jeroen Hofstee 提交于
gcc allows extensions to be non compiler specific by defining __* macros for the attributes supported by gcc. Having a different definition causes many warnings during the build (cdefs.h on FreeBSD uses __attribute((__pure__)) where u-boot uses __attribute__((pure)) for example). Do not redefine these macros to suppress these warnings. This patch ignores the checkpatch warning: WARNING: __packed is preferred over __attribute__((packed)) Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>
-
由 Pantelis Antoniou 提交于
Update git-mailrc with my nick and replace afleming as mmc custodian. Signed-off-by: NPantelis Antoniou <panto@antoniou-consulting.com>
-
- 06 9月, 2013 5 次提交
-
-
-
由 Robert P. J. Day 提交于
Somewhere along the line of refactoring the am335x header files, the kernel image load was lost, so put it back in. Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca>
-
由 Chin Liang See 提交于
Consolidating reset code into reset_manager.c. Also separating reset configuration for virtual target and real hardware Cyclone V development kit Signed-off-by: NChin Liang See <clsee@altera.com> Reviewed-by: NPavel Machek <pavel@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Tom Rini <trini@ti.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net>
-
由 Chin Liang See 提交于
Separating the configuration file for Virtual Target and real hardware Cyclone V development kit Signed-off-by: NChin Liang See <clsee@altera.com> Reviewed-by: NPavel Machek <pavel@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Tom Rini <trini@ti.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net>
-
由 Thomas Chou 提交于
The commit 1a459660 Add GPL-2.0+ SPDX-License-Identifier to source files generated a warning due to a missing comment terminator. longlong.h:7:1: warning: "/*" within comment Signed-off-by: NThomas Chou <thomas@wytron.com.tw>
-
- 05 9月, 2013 1 次提交
-
-
由 Michal Simek 提交于
Remove ARM eabi exception handling tables (for frame unwinding). AFAICT, u-boot stubs away the frame unwiding routines, so the tables will more or less just consume space. It should be OK to remove them. Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-