- 21 1月, 2016 40 次提交
-
-
由 Bin Meng 提交于
Convert ls1021atwr_nor_lpuart to driver model support. As a start, enable lpuart serial port driver. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NAlison Wang <alison.wang@nxp.com> Tested-by: NAlison Wang <alison.wang@nxp.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
Move /chosen node out of the board device tree. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
This adds driver model support to lpuart serial driver. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NBhuvanchandra DV <bhuvanchandra.dv@toradex.com> Tested-by: NBhuvanchandra DV <bhuvanchandra.dv@toradex.com>
-
由 Bin Meng 提交于
Create internal routines which take lpuart's register base as a parameter, in preparation for driver model conversion. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
There is no need to go through serial driver subsystem, instead call the driver's setbrg and putc routines directly. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
Clean up the driver codes a little bit, by: - Use tab instead of space in the macro defines - Use single line comment whenever possible - Fix insertion of blank lines Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
LPUART is seen on Freescale VF610 and QorIQ Layerscape devices. Create a Kconfig option and move it to defconfig for all boards that have this serial driver. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Acked-by: NStefan Agner <stefan.agner@toradex.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
Convert ls1021atwr_nor to driver model support. As a start, enable ns16550 serial port driver. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
This reverts commit 3e303f74. The fix up in the /aliases node does not work under the following scenarios: - Not every non-DM serial driver was written to have a driver name that conforms the format of "serial%d" or "eserial%d". - With driver model serial, the stdio_devices[] stores the serial device node name in the device tree. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Stephen Warren 提交于
Execute "sleep", and validate that it sleeps for approximately the correct amount of time. Signed-off-by: NStephen Warren <swarren@nvidia.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Stephen Warren 提交于
This test invokes the "ums" command in U-Boot, and validates that a USB storage device is enumerated on the test host system, and can be read from. Signed-off-by: NStephen Warren <swarren@nvidia.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Stephen Warren 提交于
Migrate all most tests from command_ut.c into the Python test system. This allows the tests to be run against any U-Boot binary that supports the if command (i.e. where hush is enabled) without requiring that binary to be permanently bloated with the code from command_ut. Some tests in command_ut.c can only be executed from C code, since they test internal (more unit-level) features of various U-Boot APIs. The migrated tests can all operate directly from the U-Boot console. Signed-off-by: NStephen Warren <swarren@nvidia.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Stephen Warren 提交于
This tests whether the following features of the U-Boot shell: - Execution of a directly entered command. - Compound commands (; delimiter). - Quoting of arguments containing spaces. - Executing commands from environment variables. Signed-off-by: NStephen Warren <swarren@nvidia.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Stephen Warren 提交于
This tests whether md/mw work, and affect each-other. Command repeat is also tested. test/cmd_repeat.sh is removed, since the new Python-based test does everything it used to. Signed-off-by: NStephen Warren <swarren@wwwdotorg.org> Signed-off-by: NStephen Warren <swarren@nvidia.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Stephen Warren 提交于
This tests basic environment variable functionality. Signed-off-by: NStephen Warren <swarren@wwwdotorg.org> Signed-off-by: NStephen Warren <swarren@nvidia.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Stephen Warren 提交于
Test the sandbox port's implementation of the reset command and SIGHUP handling. These should both cause the U-Boot process to exit gracefully. Signed-off-by: NStephen Warren <swarren@wwwdotorg.org> Signed-off-by: NStephen Warren <swarren@nvidia.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Stephen Warren 提交于
This tool aims to test U-Boot by executing U-Boot shell commands using the console interface. A single top-level script exists to execute or attach to the U-Boot console, run the entire script of tests against it, and summarize the results. Advantages of this approach are: - Testing is performed in the same way a user or script would interact with U-Boot; there can be no disconnect. - There is no need to write or embed test-related code into U-Boot itself. It is asserted that writing test-related code in Python is simpler and more flexible that writing it all in C. - It is reasonably simple to interact with U-Boot in this way. A few simple tests are provided as examples. Soon, we should convert as many as possible of the other tests in test/* and test/cmd_ut.c too. The hook scripts, relay control utilities, and udev rules I use for my own HW setup are published at https://github.com/swarren/uboot-test-hooks. See README.md for more details! Signed-off-by: NStephen Warren <swarren@wwwdotorg.org> Signed-off-by: NStephen Warren <swarren@nvidia.com> Tested-by: NMichal Simek <michal.simek@xilinx.com> Tested-by: NSimon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org> #v3
-
由 Mateusz Kulikowski 提交于
Add option to create threaded series of patches. With it, it will be possible to create patch threads like this: [PATCH 0/10] Add support for time travel [PATCH 1/10] Add Flux Capacitor driver [PATCH 2/10] Add Mr. Fusion driver (...) Internally it will call git send-email with --thread option Signed-off-by: NMateusz Kulikowski <mateusz.kulikowski@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Masahiro Yamada 提交于
The most basic thing for clock is to enable it, but it is missing in this uclass. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Masahiro Yamada 提交于
This header uses ulong, so it needs to include <linux/types.h>. Likewise, "struct udevice" must be declared before it is used. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Masahiro Yamada 提交于
The comment about get_periph_rate() is the same as that of set_periph_rate(). I am fixing typos here and there while I am in this file. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
We can define this in the header file and use it in usb_storage.c. There is no need to define it twice. Remove the #define from usb_storage.c. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NMarek Vasut <marex@denx.de>
-
由 Stephen Warren 提交于
A default invocation of sandbox U-Boot apparently uses no device tree, which means that no timer is registers, which in turn means that the sleep shell command hangs. Fix the sandbox timer code to register a device when there's no DT, just like e.g. the sandbox reset driver does. When there's no DT, the DM uclass can't initialize clock_rate from DT, so set a default value in the timer code instead. Signed-off-by: NStephen Warren <swarren@nvidia.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Stephen Warren 提交于
If a timer has a zero clock_rate, get_tbclk() will return zero for it, which will cause tick_to_time() to perform a division-by-zero, which will crash U-Boot. Signed-off-by: NStephen Warren <swarren@nvidia.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Add the missing code to allow bzip2 compression to be used. This is useful for sandbox tests. These files are taken from the bzip2 1.0.6 release. The license text is copied to the top of each file as is done with other bzip2 files in U-Boot. The only other change is to squash a compiler warning with nBytes. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Simon Glass 提交于
At present the uclass's post_bind() method is called before the driver's bind() method. This means that the uclass cannot use any of the information set up by the driver. Move it later in the sequence to permit this. This is an ordering change which is always fairly major in nature. The main impact is that devices which have children will not see them appear in their bind() method. From what I can see, existing drivers do not look at their children in the bind() method, so this should be safe. Conceptually this change seems to result in a 'more correct' ordering, since the uclass (which is broader than the device) gets the last word. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Simon Glass 提交于
Adjust this command to use map_sysmem() correctly so that it works on sandbox. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Simon Glass 提交于
At present this does not print zero values in numeric format (hex and decimal). Add a special case for this. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NStefan Roese <sr@denx.de> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Simon Glass 提交于
This can create a large number of pinctrl devices. It chews up early malloc() memory and takes time. Only bind those which are marked as needed before relocation. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
We should not return a -ve error code from command functions. Instead, return CMD_RET_FAILURE. This avoids the "exit not allowed from main input shell" error messages from the hush shell. Signed-off-by: NSimon Glass <sjg@chromium.org> Acked-by: NHeiko Schocher <hs@denx.de>
-
由 Simon Glass 提交于
At present we add driver-model MMC devices in the order we find them. The 'alias' order is not honoured. It is difficult to fix this for the case where we have holes in the sequence. But for the common case where the devices are numbered from 0 without any gaps, we can add the devices to the internal data structures in this order. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
For SPL we don't really need sprintf() and with tiny-printf this is not available. Allow this to be dropped in SPL when using tiny-printf. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Add a check for NULL strings to avoid printing junk to the console. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NStefan Roese <sr@denx.de>
-
由 Mugunthan V N 提交于
Enable timer driver model for dra74_evm_defconfig as omap-timer supports driver model. Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Mugunthan V N 提交于
Specify timer2 to be used as tick-timer in chosen node. Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Mugunthan V N 提交于
Enable timer driver model for dra72_evm_defconfig as omap-timer supports driver model. Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Mugunthan V N 提交于
Specify timer2 to be used as tick-timer in chosen node. Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Mugunthan V N 提交于
Since OMAP's spl doesn't support DM currently, do not define CONFIG_TIMER for spl build. Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-