- 20 11月, 2014 2 次提交
-
-
由 Zhao Qiang 提交于
add qe support to ls1021aqds Signed-off-by: NZhao Qiang <B45475@freescale.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-
由 Zhao Qiang 提交于
ls1021 is arm-core and support qe which is u-qe. add u-qe init for arm board. Signed-off-by: NZhao Qiang <B45475@freescale.com> [York Sun: Fix compiling error caused by u_qe_init()] Reviewed-by: NYork Sun <yorksun@freescale.com>
-
- 17 11月, 2014 30 次提交
-
-
由 Bo Shen 提交于
The code for this board supports following features: - Boot media support: NAND flash/SD card/SPI flash - Support LCD display (optional, disabled by default) - Support ethernet - Support USB mass storage Signed-off-by: NBo Shen <voice.shen@atmel.com> Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Bo Shen 提交于
The code for this board supports following features: - Boot media support: NAND flash/SD card/SPI flash - Support LCD display - Support ethernet - Support USB mass storage Signed-off-by: NBo Shen <voice.shen@atmel.com> Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Bo Shen 提交于
The User Register in GMAC IP is used to select interface type. When with GE feature, it is used to select interface between RGMII and GMII. If without GE feature, it is used to select interface between MII and RMII. Signed-off-by: NBo Shen <voice.shen@atmel.com> Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Josh Wu 提交于
As in SAMA5D4 SoC, the gf table in ROM code can not be seen. So, when we try to use PMECC, we need to build it when do initialization. Add a macro NO_GALOIS_TABLE_IN_ROM in soc header file. If it is defined we will build gf table runtime. The PMECC use the BCH algorithm, so based on the build_gf_tables() function in lib/bch.c, we can build the Galois Field lookup table. Signed-off-by: NJosh Wu <josh.wu@atmel.com> Signed-off-by: NBo Shen <voice.shen@atmel.com> Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Heiko Schocher 提交于
replaces the at91bootstrap code with SPL code. make the spl image with: ./tools/mkimage -T atmelimage -d spl/u-boot-spl.bin spl/boot.bin this writes the length of the spl image into the 6th execption vector. This is needed from the ROM bootloader. Signed-off-by: NHeiko Schocher <hs@denx.de> Reviewed-by: NBo Shen <voice.shen@atmel.com> Reviewed-by: NAndreas Bießmann <andreas.devel@googlemail.com> Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Heiko Schocher 提交于
replaces the at91bootstrap code with SPL code. make the spl image with: ./tools/mkimage -T atmelimage -d spl/u-boot-spl.bin spl/boot.bin this writes the length of the spl image into the 6th execption vector. This is needed from the ROM bootloader. Signed-off-by: NHeiko Schocher <hs@denx.de> Reviewed-by: NBo Shen <voice.shen@atmel.com> Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Heiko Schocher 提交于
add support for using spl code on at91sam9260 and at91sam9g45 based boards. Signed-off-by: NHeiko Schocher <hs@denx.de> Reviewed-by: NBo Shen <voice.shen@atmel.com> Reviewed-by: NAndreas Bießmann <andreas.devel@googlemail.com> [adopt Bo's change in spl.c] Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Heiko Schocher 提交于
device ready pin is signalling that the device is ready on state 1 not on 0. Simmiliar as it is in drivers/mtd/nand/nand_spl_simple.c Signed-off-by: NHeiko Schocher <hs@denx.de> Reviewed-by: NAndreas Bießmann <andreas.devel@googlemail.com> Reviewed-by: NBo Shen <voice.shen@atmel.com> Acked-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Heiko Schocher 提交于
erase one nand block in spl code. keep it simple, as size matters This is used on the upcoming taurus spl support. Signed-off-by: NHeiko Schocher <hs@denx.de> Acked-by: NScott Wood <scottwood@freescale.com> Reviewed-by: NBo Shen <voice.shen@atmel.com> Reviewed-by: NAndreas Bießmann <andreas.devel@googlemail.com> Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Heiko Schocher 提交于
using this driver in SPL code with CONFIG_SPL_NAND_ECC configured leads in an compileerror. Fix this. Signed-off-by: NHeiko Schocher <hs@denx.de> Reviewed-by: NAndreas Bießmann <andreas.devel@googlemail.com> Reviewed-by: NBo Shen <voice.shen@atmel.com> [fix subject] Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Heiko Schocher 提交于
enable to boot only a raw u-boot.bin image from nand with the CONFIG_SPL_NAND_RAW_ONLY define. This option saves space on boards where spl space is low. Signed-off-by: NHeiko Schocher <hs@denx.de> Reviewed-by: NAndreas Bießmann <andreas.devel@googlemail.com> Reviewed-by: NBo Shen <voice.shen@atmel.com> Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Heiko Schocher 提交于
Signed-off-by: NHeiko Schocher <hs@denx.de> Reviewed-by: NBo Shen <voice.shen@atmel.com> Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Heiko Schocher 提交于
- compile mpddrc ram init code also for AT91SAM9M10G45 based boards. - in CONFIG_SAMA5D3 case, look for the ATMEL_MPDDRC_CR_DECOD_INTERLEAVED in the cr configuration Signed-off-by: NHeiko Schocher <hs@denx.de> Reviewed-by: NAndreas Bießmann <andreas.devel@googlemail.com> Reviewed-by: NBo Shen <voice.shen@atmel.com> Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Heiko Schocher 提交于
use the configure value for computing the ba_off value not the value from the cr register. This leaded in a wrong ram configuration on the upcoming corvus spl board support. Signed-off-by: NHeiko Schocher <hs@denx.de> Reviewed-by: NAndreas Bießmann <andreas.devel@googlemail.com> Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Heiko Schocher 提交于
Signed-off-by: NHeiko Schocher <hs@denx.de> Reviewed-by: NBo Shen <voice.shen@atmel.com> Reviewed-by: NJagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Heiko Schocher 提交于
move CONFIG_SYS_SPI_WRITE_TOUT into drivers/spi/atmel_spi.h and define a default value. Delete this define in the board config files, where it is possible (all boards use currently the same value). Signed-off-by: NHeiko Schocher <hs@denx.de> Reviewed-by: NJagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> Reviewed-by: NAndreas Bießmann <andreas.devel@googlemail.com> Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Heiko Schocher 提交于
generate the boot.bin file for all atmel SoC (arm920, arm926, armv7) Signed-off-by: NHeiko Schocher <hs@denx.de> Reviewed-by: NAndreas Bießmann <andreas.devel@googlemail.com> Reviewed-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> [fix subject] Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Bo Shen 提交于
The clock source for master clock can be slow clock, main clock, plla clock or upll clock. So, make the clock source selection field in mckr can be configured. Signed-off-by: NBo Shen <voice.shen@atmel.com> Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Bo Shen 提交于
We need to make sure the main clock ready field in MCFR is set after switch to main crystal oscillator. Signed-off-by: NBo Shen <voice.shen@atmel.com> Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Bo Shen 提交于
Signed-off-by: NBo Shen <voice.shen@atmel.com> Reviewed-by: NAndreas Bießmann <andreas.devel@googlemail.com> Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Bo Shen 提交于
When boot up without mac address setting, it will give the warning message like: "Warning: failed to set MAC address", however when execute network related command, it still execute them without any warning information. With this patch, it will exit directly with following information: "gmac0: mac address is not valid" It also solve the problem after bootup then set mac address and the mac address won't set to net device issue. Signed-off-by: NBo Shen <voice.shen@atmel.com> Tested-by: NBoris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
-
-
由 Nobuhiro Iwamatsu 提交于
Common part of config for lager, koelsch, alt and gose board will be able to replace rcar-gen2-common.h. Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Nobuhiro Iwamatsu 提交于
The lager, koelsch, alt, gose board supported in rmobile is distinguished as the R-Car Gen2 series and has much common setting. This collect up the common part of config as rcar-gen2-common.h. Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Nobuhiro Iwamatsu 提交于
Gose board is defined CONFIG_SYS_SDRAM_BASE, and this can use a basic function of dram_init_banksize instead. Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Nobuhiro Iwamatsu 提交于
Lager board is defined CONFIG_SYS_SDRAM_BASE, and this can use a basic function of dram_init_banksize instead. Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Nobuhiro Iwamatsu 提交于
Koesch board is defined CONFIG_SYS_SDRAM_BASE, and this can use a basic function of dram_init_banksize instead. Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Nobuhiro Iwamatsu 提交于
Alt board is defined CONFIG_SYS_SDRAM_BASE, and this can use a basic function of dram_init_banksize instead. Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Nobuhiro Iwamatsu 提交于
This moves SH_32BIT to Kconfig, and removes SH_32BIT from config files. Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
- 15 11月, 2014 8 次提交
-
-
-
-
由 Yangbo Lu 提交于
Enable these boards mtdparts for nor flash: p1020rdb-pd, p1021rdb-pc, p1022ds, p1025twr, and p2020rdb-pc. Signed-off-by: NXie Xiaobo <X.Xie@freescale.com> Signed-off-by: NYangbo Lu <yangbo.lu@freescale.com> Cc: York Sun <yorksun@freescale.com> Cc: Scott Wood <scottwood@freescale.com>
-
由 Valentin Longchamp 提交于
This converts all the Keymile powerpc boards to the generic board initialization. This includes the 3 Keymile powerpc subsystems: km82xx, km83xx, and kmp204x. Signed-off-by: NValentin Longchamp <valentin.longchamp@keymile.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-
由 Valentin Longchamp 提交于
The argument boot_flags of board_init_f() is not used at all in the powerpc specific board.c init sequence. Now with the generic init sequence, this boot_flags arg is used by board_init_f(). This patch sets the r3 register that is used to pass the boot_flags argument from the start.S board_init_f() call to 0 prior to the function call to avoid unknown content to end up in gd->flags. Signed-off-by: NValentin Longchamp <valentin.longchamp@keymile.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-
由 Ashish Kumar 提交于
* fdt_fixup_mtdparts is called from ft_board_setup * Run "mtdparts default" to create NAND partition on uboot * Use mtdparts to create partitions dynamically rather than using static partitions in device tree Signed-off-by: NAshish Kumar <Ashish.Kumar@freescale.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-
由 Ashish Kumar 提交于
* fdt_fixup_mtdparts is called from ft_board_setup * run "mtdparts default" to create NAND, NOR partition on uboot * Use mtdparts to create partitions dynamically rather than using static partitions in device tree Signed-off-by: NAshish Kumar <Ashish.Kumar@freescale.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-
由 Prabhakar Kushwaha 提交于
IFC registers can be of type Little Endian or big Endian depending upon Freescale SoC. Here SoC defines the register type of IFC IP. So use IFC acessor functions instead of in_be32(). Signed-off-by: NPrabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-