RK3399 needs reserve 0x200000 at the beginning of DRAM, for ATF bl31.
Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
Acked-by: NSimon Glass <sjg@chromium.org>

Update MAINTAINER files for kylin_rk3036, evb_rk3036.
Signed-off-by: NZiyuan Xu <xzy.xu@rock-chips.com>
Acked-by: NSimon Glass <sjg@chromium.org>

Add an entry for the mx7dsabresd_secure_defconfig target.
Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>

Remove unused define constant.
Signed-off-by: NDiego Dorta <diego.dorta@nxp.com>
Reviewed-by: NFabio Estevam <fabio.estevam@nxp.com>

imx_ddr_size() can be used to calculate the DDR size in runtime.

By using this function we no longer need to define PHYS_SDRAM_SIZE.

Cc: Martin Donnelly <martin.donnelly@ge.com>
Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>

imx_ddr_size() can be used to calculate the DDR size in runtime.

By using this function we no longer need to define PHYS_SDRAM_SIZE.

Cc: Heiko Schocher <hs@denx.de>
Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
Acked-by: NHeiko Schocher <hs@denx.de>

imx_ddr_size() can be used to calculate the DDR size in runtime.

By using this function we no longer need to define PHYS_SDRAM_SIZE.
Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>

This commit adds support for the Toradex Computer on Modules
Colibri iMX7S/iMX7D. The two modules/SoC's are very similar hence
can be easily supported by one board. The board code detects RAM
size at runtime which is one of the differences between the two
boards. The board also uses the UART's in DTE mode, hence making
use of the new DTE support via serial DM.
Signed-off-by: NStefan Agner <stefan.agner@toradex.com>

It's not necessary to implement the is_mx6q function, there is a macro in
sys_proto.h already implemented.
Signed-off-by: NBreno Lima <breno.lima@nxp.com>
Reviewed-by: NFabio Estevam <fabio.estevam@nxp.com>

It's not necessary to implement the is_mx6q function, there is a macro in
sys_proto.h already implemented.
Signed-off-by: NBreno Lima <breno.lima@nxp.com>
Reviewed-by: NFabio Estevam <fabio.estevam@nxp.com>

It's not necessary to use the is_cpu_type function, there is a macro in
sys_proto.h already implemented.
Signed-off-by: NBreno Lima <breno.lima@nxp.com>
Reviewed-by: NFabio Estevam <fabio.estevam@nxp.com>

Added removal of the fsl,ext-reset-output property in the wdog node for board
revisions that pre-date the addition of the external watchdog reset signal.

This property is a recent addition to mainline linux kernel in order to
specify that the IMX watchdog external reset should be used instead of the
internal chip-level reset.
Signed-off-by: NTim Harvey <tharvey@gateworks.com>

Re-factor the board-specific dt fixups so that they are easier to follow
and extend in the future:
 - use defines for DT paths
 - use switch/case per board
 - order models numerically

There is no functional change in the code
Signed-off-by: NTim Harvey <tharvey@gateworks.com>

The hwconfig env var allows user to control hardware specific configuration
of board specific features but not all Ventana boards have the same features.

We will use the magic default value of "_UNKNOWN_" to signify that the
bootloader should create this based on detected board model.
Signed-off-by: NTim Harvey <tharvey@gateworks.com>

The GW5520 has 10 DIO's instead of the typical 4 found on the Ventana
product family.
Signed-off-by: NTim Harvey <tharvey@gateworks.com>

Replace the static list of board-specific digital I/O's with a dynamic list.
Signed-off-by: NTim Harvey <tharvey@gateworks.com>

Not all Ventana boards have an RS232 transceiver, make it board specific.
Signed-off-by: NTim Harvey <tharvey@gateworks.com>

Ventana boards with a PCI Marvell Sky2 GigE MAC require the MAC address to
be placed in a DT node in order for the mainline linux driver to obtain it.
Signed-off-by: NTim Harvey <tharvey@gateworks.com>

The GW16082 mini-PCI expansion mezzanine uses a TI XIO2001 PCIe-to-PCI
bridge with legacy INTA/B/C/D interrupts. These interrupts are assigned
in the reverse order according to the PCI spec.

If the TI bridge is found on the Ventana PCI bus, add device-tree nodes
according to bus enumeration explicitly defining the interrupt mapping
to override the default PCI mapping in the Linux kernel. This allows
the GW16082 to work with upstream kernels that support device-tree
irq parsing.
Signed-off-by: NTim Harvey <tharvey@gateworks.com>

Signed-off-by: NStefano Babic <sbabic@denx.de>
CC: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: NFabio Estevam <fabio.estevam@nxp.com>

There is a new Orange Pi PC *Plus* version available now,
this is an extended version of the regular Orange Pi PC
with sdio wifi and an eMMC.

The upstream kernel devs have decided that they want a separate
dts for the PC Plus rather then sharing a single dts between the
regular PC and the PC Plus. So add a new orangepi_pc_plus_defconfig
to match.

The added dts file matches the one submitted to the upstream kernel.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>

QSPI and IFC are pin-multiplexed on LS1043AQDS board. If QSPI is
enabled, IFC would not be initialized correctly. So disable the IFC
node for Linux.
Signed-off-by: NGong Qianyu <Qianyu.Gong@nxp.com>
Reviewed-by: NYork Sun <york.sun@nxp.com>

This patch implements PSCI functions for ls102xa SoC following PSCI v1.0,
they are as the list:
    psci_version,
    psci_features,
    psci_cpu_suspend,
    psci_affinity_info,
    psci_system_reset,
    psci_system_off.

Tested on LS1021aQDS, LS1021aTWR.
Signed-off-by: NWang Dongsheng <dongsheng.wang@nxp.com>
Signed-off-by: NHongbo Zhang <hongbo.zhang@nxp.com>
Reviewed-by: NYork Sun <york.sun@nxp.com>

Add ls1043aqds_lpuart_defconfig to file list.
Signed-off-by: NYork Sun <york.sun@nxp.com>

Add ls2080aqds_qspi_defconfig to file list.
Signed-off-by: NYork Sun <york.sun@nxp.com>

Add SD secure boot target for ls1021atwr.
Implement board specific spl_board_init() to setup CAAM stream ID and
corresponding stream ID in SMMU. Change the u-boot size defined by a
macro for copying the main U-Boot by SPL to also include the u-boot
Secure Boot header size as header is appended to u-boot image. So header
will also be copied from SD to DDR.
Reviewed-by: NAneesh Bansal <aneesh.bansal@nxp.com>
Signed-off-by: NSumit Garg <sumit.garg@nxp.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NYork Sun <york.sun@nxp.com>

Override jump_to_image_no_args function to include validation of
u-boot image using spl_validate_uboot before jumping to u-boot image.
Also define macros in SPL framework to enable crypto operations.
Reviewed-by: NAneesh Bansal <aneesh.bansal@nxp.com>
Signed-off-by: NSumit Garg <sumit.garg@nxp.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NYork Sun <york.sun@nxp.com>

Add a README to guide people flash the ATF and U-Boot
with Rockchip tools to bring up to board.
Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
Acked-by: NSimon Glass <sjg@chromium.org>

RK3399 is a SoC from Rockchip with dual-core Cortex-A72
and quad-core Cortex-A53 CPU. It supports two USB3.0
type-C ports and two USB2.0 EHCI ports. Other interfaces
are very much like RK3288, the DRAM are 32bit width address
and support address from 0 to 4GB-128MB range.
Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
Acked-by: NSimon Glass <sjg@chromium.org>

The 'evb_rk3036' and 'kylin' is not a vendor name, let's replace them
to 'rockchip' which is a real _vendor_ name, and meet the architecure
'board/<vendor>/<board-name>/'.

More boards from rockchip like evb_rk3288, evb_rk3399 will comes later.
Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
Reviewed-by: NEddie Cai <eddie.cai.kernel@gmail.com>

evb-3288 board RK3288-based development board with 2 USB ports, HDMI,
VGA, micro-SD card, audio, WiFi and Gigabit Ethernet. It also includes
on-board 8G eMMC and 2GB of SDRAM. Expansion connector provide access to
display pins, I2C, SPI, UART and GPIOs. This add some basic files
required to allow the board to output serial messaged and can run
command(mmc info etc).

evb-rk3288 also supports booting from eMMC or SD card, the default is eMMC.
Signed-off-by: NZiyuan Xu <xzy.xu@rock-chips.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Sandbox is built with 64-bit ints by default. This doesn't work properly on
32-bit machines.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NTom Rini <trini@konsulko.com>

We already have an SPL driver for the sunxi NAND controller, now add
the normal/standard one.

The source has been copied from Linux 4.6 with a few changes to make
it work in u-boot.
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: NHans de Goede <hdegoede@redhat.com>

On most platforms the print_fpga_state function is never called.  Only
on dlvision-10g do we, so in that case inline it.  Drop it from
everywhere else to avoid extra strings.
Signed-off-by: NTom Rini <trini@konsulko.com>
Acked-by: NReinhard Pfau <reinhard.pfau@gdsys.cc>
Acked-by: NDirk Eibach <dirk.eibach@gdsys.cc>

Implement spl_start_uboot to let Falcon mode work.
Signed-off-by: NLadislav Michl <ladis@linux-mips.org>
Reviewed-by: NHeiko Schocher <hs@denx.de>
Acked-by: NEnric Balletbo i Serra <enric.balletbo@collabora.com>

Signed-off-by: NLadislav Michl <ladis@linux-mips.org>

Signed-off-by: NLadislav Michl <ladis@linux-mips.org>

Signed-off-by: NLadislav Michl <ladis@linux-mips.org>

Signed-off-by: NLadislav Michl <ladis@linux-mips.org>

Signed-off-by: NLadislav Michl <ladis@linux-mips.org>