- 05 11月, 2021 2 次提交
-
-
由 Tom Rini 提交于
This converts the following to Kconfig: CONFIG_FEC_MXC Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 10 10月, 2021 1 次提交
-
-
由 Anatolij Gustschin 提交于
Move CONFIG_VIDEO_MXS from board headers to Kconfig and drop it from obsolete cfb_console driver. Signed-off-by: NAnatolij Gustschin <agust@denx.de> Reviewed-by: NFabio Estevam <festevam@gmail.com>
-
- 01 9月, 2021 2 次提交
-
-
由 Tom Rini 提交于
This converts the following to Kconfig: CONFIG_SYS_MALLOC_LEN Signed-off-by: NTom Rini <trini@konsulko.com> Acked-by: NSean Anderson <seanga2@gmail.com> Reviewed-by: NRick Chen <rick@andestech.com>
-
由 Tom Rini 提交于
- In most of the codebase, we reference CONFIG_SYS_LOAD_ADDR and not CONFIG_LOADADDR. - Generally, CONFIG_SYS_LOADADDR is set to CONFIG_LOADADDR and then as noted, we use CONFIG_SYS_LOADADDR. Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 31 8月, 2021 2 次提交
-
-
由 Tom Rini 提交于
This converts the following to Kconfig: CONFIG_SYS_I2C_MXC CONFIG_SYS_I2C_MXC_I2C1 CONFIG_SYS_I2C_MXC_I2C2 CONFIG_SYS_I2C_MXC_I2C3 CONFIG_SYS_I2C_MXC_I2C4 Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
This converts the following to Kconfig: CONFIG_SYS_I2C_SPEED CONFIG_SYS_I2C_SLAVE Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 09 6月, 2021 1 次提交
-
-
由 Aswath Govindraju 提交于
Currently the config options CONFIG_SYS_DFU_DATA_BUF_SIZE and CONFIG_SYS_DFU_MAX_FILE_SIZE are being set in include/configs/<board>.h files and also in <board_name>_defconfig files without a Kconfig option. It is easier for users to set these configs in defconfig files than in config header files as they are a part of the source code. Add Kconfig symbols, and update the defconfigs by using tools/moveconfig.py script. Suggested-by: NPratyush Yadav <p.yadav@ti.com> Signed-off-by: NAswath Govindraju <a-govindraju@ti.com> Acked-by: NOleksandr Suvorov <oleksandr.suvorov@toradex.com> Acked-by: NMatthias Brugger <mbrugger@suse.com> Acked-by: NLukasz Majewski <lukma@denx.de>
-
- 18 10月, 2020 2 次提交
-
-
由 Patrick Delaunay 提交于
Done with: ./tools/moveconfig.py BMP_16BPP BMP_24BPP BMP_32BPP Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Patrick Delaunay 提交于
Done with: ./tools/moveconfig.py VIDEO_BMP_RLE8 Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
- 24 8月, 2020 1 次提交
-
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_SPLASH_SCREEN CONFIG_SPLASH_SCREEN_ALIGN CONFIG_SPLASHIMAGE_GUARD CONFIG_SPLASH_SOURCE Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 08 8月, 2020 1 次提交
-
-
由 Tom Rini 提交于
This converts the following to Kconfig: CONFIG_SYS_MMC_ENV_DEV CONFIG_SYS_MMC_ENV_PART Note that with this conversion we now have consistent behavior with respect to ensuring that we have always selected the correct MMC device and hardware partition. Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 17 7月, 2020 1 次提交
-
-
由 Tom Rini 提交于
This converts the following to Kconfig: CONFIG_MXC_UART Signed-off-by: NTom Rini <trini@konsulko.com> Acked-by: NPeng Fan <peng.fan@nxp.com>
-
- 19 5月, 2020 1 次提交
-
-
由 Simon Glass 提交于
Move this uncommon header out of the common header. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 09 5月, 2020 1 次提交
-
-
由 Ashok Reddy Soma 提交于
Move below defines which are used by mtest utility to Kconfig. CONFIG_SYS_MEMTEST_START CONFIG_SYS_MEMTEST_END Signed-off-by: NAshok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com> [trini: Fix kmcoge5ne board, re-run migration as well] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 21 11月, 2019 1 次提交
-
-
由 Tom Rini 提交于
- In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: NTom Rini <trini@konsulko.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com> Reviewed-by: NSimon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
-
- 08 10月, 2019 3 次提交
-
-
由 Fabio Estevam 提交于
Add support for the VXT VL050-8048NT-C01 panel connected through the 24 bit parallel LCDIF interface. Signed-off-by: NFabio Estevam <festevam@gmail.com> Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>
-
由 Fabio Estevam 提交于
U-Boot binary has grown in such a way that it goes beyond the reserved area for the environment variables. Running "saveenv" causes U-Boot to hang because of this overlap. Fix this problem by increasing the CONFIG_ENV_OFFSET size. Also, in order to prevent this same problem in the future, use CONFIG_BOARD_SIZE_LIMIT, which will detect the overlap in build-time. CONFIG_BOARD_SIZE_LIMIT does not accept math expressions, so declare CONFIG_ENV_OFFSET with its direct value instead. Signed-off-by: NFabio Estevam <festevam@gmail.com> Signed-off-by: NFabio Berton <fabio.berton@ossystems.com.br> Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>
-
由 Otavio Salvador 提交于
This add the boot menu option for the DWARF baseboard as well as a specific config file for users which wish to use it as a pre-defined board. Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>
-
- 05 5月, 2019 1 次提交
-
-
由 Alex Kiernan 提交于
This converts the following to Kconfig: CONFIG_SUPPORT_EMMC_BOOT As requested by Michal Simek <michal.simek@xilinx.com>, these boards have no eMMC so CONFIG_SUPPORT_EMMC_BOOT has not been migrated: xilinx_zynqmp_zc1275_revB xilinx_zynqmp_zc1751_xm018_dc4 xilinx_zynqmp_zc1751_xm019_dc5 xilinx_zynqmp_zcu100_revC xilinx_zynqmp_zcu102_rev1_0 xilinx_zynqmp_zcu102_revA xilinx_zynqmp_zcu102_revB xilinx_zynqmp_zcu104_revA xilinx_zynqmp_zcu104_revC xilinx_zynqmp_zcu106_revA xilinx_zynqmp_zcu111_revA Signed-off-by: NAlex Kiernan <alex.kiernan@gmail.com> Acked-by: NLukasz Majewski <lukma@denx.de> Acked-by: NPatrick Delaunay <patrick.delaunay@st.com> Acked-by: NRamon Fried <ramon.fried@gmail.com> Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: NSébastien Szymanski <sebastien.szymanski@armadeus.com>
-
- 13 3月, 2019 1 次提交
-
-
由 Fabio Estevam 提交于
Convert to use DM_PMIC for the PFUZE3000. Since this PMIC is under an I2C bus, conver to DM_I2C as well. Also, since I2C is not used in SPL, remove CONFIG_SPL_I2C_SUPPORT to avoid build warnings. Signed-off-by: NFabio Estevam <festevam@gmail.com> Acked-by: NOtavio Salvador <otavio@ossystems.com.br>
-
- 10 10月, 2018 2 次提交
-
-
由 Otavio Salvador 提交于
This allow the use of a USB storage or PXE network booting as fallback, allowing for example for manufacturing installation of eMMC storage in an easy way. Reviewed-by: NFabio Estevam <festevam@gmail.com> Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>
-
由 Otavio Salvador 提交于
After discussing with TechNexion about how its default setting, it is better to install on the eMMC user partition by default, when using DFU, so it works out of box for majority of users. Reviewed-by: NFabio Estevam <festevam@gmail.com> Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>
-
- 18 9月, 2018 1 次提交
-
-
由 Otavio Salvador 提交于
This adds the device tree to the DFU and bootmenu environment setting. Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>
-
- 14 9月, 2018 6 次提交
-
-
由 Otavio Salvador 提交于
Falcon mode boots the kernel directly from SPL, without loading the full U-Boot. As pico-imx6ul does not have a GPIO for selecting Falcon versus normal mode, enter in Falcon mode when the customer selects the CONFIG_SPL_OS_BOOT option in menuconfig. Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>
-
由 Otavio Salvador 提交于
The CONFIG_FSL_USDHC is defined inside "mx6_common.h", which is already included in this file. Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br> Reviewed-by: NFabio Estevam <festevam@gmail.com>
-
由 Otavio Salvador 提交于
This rework the DFU settings so it supports the SPL and U-Boot image, as well as the single partition layout we are using by default. Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>
-
由 Otavio Salvador 提交于
Currently the baseboards do not offer a way to autodetect which one is in use, so we ask the user if no value has been set. Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>
-
由 Fabio Estevam 提交于
There are two versions of imx6ul pico SOMs: one with 256MB and another one with 512MB of RAM. Convert to SPL so that both versions can be supported. This patch doesn't rework the clock initialization to avoid changing the behavior in this same patch, so it will be cleaned up in future. Currently only the 256MB is tested/supported. Signed-off-by: NFabio Estevam <festevam@gmail.com> Signed-off-by: NFabio Berton <fabio.berton@ossystems.com.br> Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>
-
由 Fabio Estevam 提交于
Instead of keeping a custom environment, use a more generic approach by switching to distro config. Signed-off-by: NFabio Estevam <festevam@gmail.com> Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>
-
- 18 8月, 2018 1 次提交
-
-
由 Adam Ford 提交于
This converts the following to Kconfig: CONFIG_MII CONFIG_DRIVER_TI_EMAC Signed-off-by: NAdam Ford <aford173@gmail.com> Acked-by: NJagan Teki <jagan@amarulasolutions.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
- 17 8月, 2018 1 次提交
-
-
由 Tom Rini 提交于
We have the following cases: - CONFIG_NR_DRAM_BANKS was defined, migrate normally - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for CONFIG_NR_DRAM_BANKS after a check, just migrate it over now. - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 + 2), set this to 8. Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 07 5月, 2018 1 次提交
-
-
由 Tom Rini 提交于
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 09 4月, 2018 1 次提交
-
-
由 Mario Six 提交于
Migrate the CONFIG_FSL_ESDHC option to Kconfig. Signed-off-by: NMario Six <mario.six@gdsys.cc>
-
- 24 2月, 2018 1 次提交
-
-
由 Adam Ford 提交于
This converts the following to Kconfig: CONFIG_BOOTP_BOOTPATH CONFIG_BOOTP_DNS CONFIG_BOOTP_GATEWAY CONFIG_BOOTP_HOSTNAME CONFIG_BOOTP_PXE CONFIG_BOOTP_SUBNETMASK CONFIG_CMDLINE_EDITING CONFIG_AUTO_COMPLETE CONFIG_SYS_LONGHELP CONFIG_SUPPORT_RAW_INITRD CONFIG_ENV_VARS_UBOOT_CONFIG Signed-off-by: NAdam Ford <aford173@gmail.com> [trini: Re-run the migration] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 02 2月, 2018 1 次提交
-
-
由 Lukasz Majewski 提交于
This commit moves USB_FUNCTION_MASS_STORAGE config to Kconfig. Signed-off-by: NLukasz Majewski <lukma@denx.de> Reviewed-by: NJaehoon Chung <jh80.chung@samsung.com>
-
- 20 11月, 2017 4 次提交
-
-
由 Fabio Berton 提交于
Signed-off-by: NFabio Berton <fabio.berton@ossystems.com.br> Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>
-
由 Fabio Berton 提交于
Command run setup_emmc will create gpt partitions for mmc 0 device based on patitions variable. Signed-off-by: NFabio Berton <fabio.berton@ossystems.com.br> Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>
-
由 Fabio Berton 提交于
Create layout with a boot 16MiB partition and rootfs with remain space. Signed-off-by: NFabio Berton <fabio.berton@ossystems.com.br> Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br> Reviewed-by: NFabio Estevam <fabio.estevam@nxp.com>
-
由 Fabio Berton 提交于
Change dfu_alt_info variable to use the following altsetting: uboot: To flash raw U-Boot /zImage: boot: To copy kernel image /imx6ul-pico-hobbit.dtb: To copy dtb file rootfs: To copy rootfs List the currently attached DFU capable USB devices running: sudo dfu-util -l Flash U-Boot: sudo dfu-util -D u-boot.imx -a uboot Copy boot files: sudo dfu-util -D zImage -a /zImage sudo dfu-util -D imx6ul-pico-hobbit.dtb -a /imx6ul-pico-hobbit.dtb Flash rootfs: sudo dfu-util -D rootfs.ext4 -a rootfs To copy boot files you need to have a formated mmc 0:1 partition. To format with ext4 filesystem you can use ums. Run on target: ums 0 mmc 0 and on host: sudo mkfs.ext4 /dev/sdx1 Signed-off-by: NFabio Berton <fabio.berton@ossystems.com.br> Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>
-