- 18 11月, 2015 8 次提交
-
-
由 Quentin Armitage 提交于
For Marvell plugs, move the configuration of DHCP, NAND/SF, PING and USB commands, and HUSH_PARSER into the _defconfig file, rather than the include/configs/*plug.h files. This avoids compiler warnings of duplicate definitions if the option is selected in the .config, but also defined in the include/configs/*plug.h file. Signed-off-by: NQuentin Armitage <quentin@armitage.org.uk>
-
由 Quentin Armitage 提交于
include/configs/guruplug.h defined CONFIG_CMD_FAT twice. Signed-off-by: NQuentin Armitage <quentin@armitage.org.uk>
-
由 Quentin Armitage 提交于
The Marvell plugs are very similar systems, and so it makes sense for their u-boots to have the same commands/configuration. Add EXT4 and MII to Dreamplug, DATE to Guruplug and Sheevaplug. Add CONFIG_SYS_ALT_MEMTEST to Sheevaplug. There are still command differences around NAND, SPI/NOR. Also default to building u-boot.kwb for Sheevaplug and Guruplug. Signed-off-by: NQuentin Armitage <quentin@armitage.org.uk>
-
由 Dirk Eibach 提交于
SAR1_CPU_CORE_MASK was wrong, probably copy/paste from another architecture. Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc> Reviewed-by: NStefan Roese <sr@denx.de>
-
由 Stefan Roese 提交于
The binary header ends with one lword, defining if another header follows this one. This additions 4 bytes need to be taken into account in the generation of the header size. And the complete 4 bytes at the end of this binary header need to get cleared. Signed-off-by: NStefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Kevin Smith <kevin.smith@elecsyscorp.com>
-
由 Kevin Smith 提交于
Instead of allocating space in the driver for the serdes specification table, just allow the board file to set a pointer to it. Also, allow the board to only specify the lanes that are used instead of including unused lanes. Signed-off-by: NKevin Smith <kevin.smith@elecsyscorp.com> Acked-by: NStefan Roese <sr@denx.de> Cc: Dirk Eibach <eibach@gdsys.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
-
由 Kevin Smith 提交于
Functions that do not modify the pointer passed should declare it as const. Signed-off-by: NKevin Smith <kevin.smith@elecsyscorp.com> Acked-by: NStefan Roese <sr@denx.de> Cc: Dirk Eibach <eibach@gdsys.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
-
由 Kevin Smith 提交于
A lot of extra configuration information was left over in the Marvell serdes and DDR3 initialization code for boards that U-boot does not support. Remove this extra config information, and the concept of fixing up board topologies with information loaded from an EEPROM. If this needs to be done, it should be handled in the board file, not in core code. Signed-off-by: NKevin Smith <kevin.smith@elecsyscorp.com> Acked-by: NStefan Roese <sr@denx.de> Cc: Dirk Eibach <eibach@gdsys.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
-
- 17 11月, 2015 2 次提交
-
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Vincent Stehlé 提交于
The read_trace_config() can dereference the line pointer after freeing it on its error path. Avoid that. This was found by Coverity Scan. Signed-off-by: NVincent Stehlé <vincent.stehle@freescale.com> Cc: Simon Glass <sjg@chromium.org>
-
- 16 11月, 2015 6 次提交
-
-
-
由 Nikita Kiryanov 提交于
Add the following splash locations to cm-fx6: * filesystem formatted mmc * filesystem formatted usb * filesystem formatted sata Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Tom Rini <trini@konsulko.com> Signed-off-by: NNikita Kiryanov <nikita@compulab.co.il> Acked-by: NIgor Grinberg <grinberg@compulab.co.il>
-
由 Nikita Kiryanov 提交于
Add support for loading splashimage from filesystem formatted sata storage. Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Tom Rini <trini@konsulko.com> Signed-off-by: NNikita Kiryanov <nikita@compulab.co.il>
-
由 Nikita Kiryanov 提交于
Add support for loading splash image from USB drive formatted with a filesystem. Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Tom Rini <trini@konsulko.com> Signed-off-by: NNikita Kiryanov <nikita@compulab.co.il>
-
由 Nikita Kiryanov 提交于
Add support for loading splash image from an SD card formatted with a filesystem. Update boards to maintain original behavior where needed. Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Tom Rini <trini@konsulko.com> Signed-off-by: NNikita Kiryanov <nikita@compulab.co.il>
-
由 Nikita Kiryanov 提交于
Rename raw read functions to *_read_raw() in preparation for supporting read_fs() feature. Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Tom Rini <trini@konsulko.com> Signed-off-by: NNikita Kiryanov <nikita@compulab.co.il> Acked-by: NIgor Grinberg <grinberg@compulab.co.il>
-
- 13 11月, 2015 24 次提交
-
-
-
-
由 Bin Meng 提交于
commit c3c016cf "sf: Add SPI NOR protection mechanism" introduced flash_lock()/flash_unlock()/flash_is_locked() methods for SPI flash, but not every flash driver supplies these. We should test these methods against NULL before actually calling them. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NFabio Estevam <fabio.estevam@freescale.com> Reviewed-by: NJagan Teki <jteki@openedev.com>
-
由 Bin Meng 提交于
CONFIG_SYS_EARLY_PCI_INIT is not needed any more since with driver model, PCI enumeration is automatically triggered. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
Now that we have converted all x86 boards to use driver model pci, remove these legacy pci codes. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
These are leftover when converted to use driver model pci. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
Move to driver model for ETH (e1000) on QEMU. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
Move to driver model for USB on QEMU. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
Move to driver model for pci on QEMU. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
Move chipset-specific codes such as PAM init, PCIe ECAM and MP table from pci.c to qemu.c, to prepare for DM PCI conversion. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
The call to pci_run_vga_bios() is not needed as this is handled in the vesa_fb driver. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
Currently timer_init() is called in board_r.c which is quite late. Some vgabios execution requires we set up the i8254 timer correctly, but video initialization comes before timer_init(). Move the call to board_f.c. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
According to Atom E6xx datasheet, setting VGA Disable (bit17) of Graphics Controller register (offset 0x50) prevents IGD (D2:F0) from reporting itself as a VGA display controller class in the PCI configuration space, and should also prevent it from responding to VGA legacy memory range and I/O addresses. However test result shows that with just VGA Disable bit set and a PCIe graphics card connected to one of the PCIe controllers on the E6xx, accessing the VGA legacy space still causes system hang. After a number of attempts, it turns out besides VGA Disable bit, the SDVO (D3:F0) device should be disabled to make it work. To simplify, use the Function Disable register (offset 0xc4) to disable both IGD (D2:F0) and SDVO (D3:F0) devices. Now these two devices will be completely disabled (invisible in the PCI configuration space) unless a system reset is performed. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
Add Kconfig options for 8259 and 8254. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
Rename pcat_timer.c to i8254.c and pcat_interrupts.c to i8259.c, to match their header file names (i8254.h and i8259.h). Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
Initialize counter 1, used to refresh request signal. This is required for legacy purpose as some codes like vgabios utilizes counter 1 to provide delay functionality. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
This cleans up i8254 and i8259 codes to fix several cosmetic issues, like coding convention and some comments improvement. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
PARANOID_IRQ_TRIGGERS is not referenced anywhere in U-Boot. Remove these dead codes wrapped by it. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
CONFIG_SYS_NUM_IRQS is actually not something we can configure, but an architecture defined number of ISA IRQs. Move it from x86-common.h to asm/interrupt.h and rename it to SYS_NUM_IRQS. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Stefano Babic 提交于
wandboard and mx6cuboxi have warnings because BOOT_DELAY is defined twice. Signed-off-by: NStefano Babic <sbabic@denx.de> CC: Vagrant Cascadian <vagrant@debian.org> CC: Otavio Salvador <otavio@ossystems.com.br> CC: Fabio Estevam <fabio.estevam@freescale.com>
-
由 Francois Retief 提交于
Signed-off-by: NFrancois Retief <fgretief@spaceteq.co.za>
-
由 Daniel Hellstrom 提交于
Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com>
-
由 Daniel Hellstrom 提交于
Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com>
-
由 Daniel Hellstrom 提交于
Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com>
-