Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

The SPI env code didn't support redundant environments until recently, but
this code was written before that.  Since it has never been tested (and
currently causes a build failure), simply punt it.  If the functionality
is actually desired, it can be re-added once it has been tested.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

The u-boot.lds CPP unification missed the Blackfin-specific clean target.
It is no longer needed, so punt it.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Support the new AD7160 eval board.
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Some commands (like 'mii') use this name to select devices, but they break
when those names contain spaces.  So drop the space from the Blackfin EMAC
driver.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Acked-by: NHeiko Schocher <hs@denx.de>

The L1 regions of Core B are not directly accessible from Core A, so we
need to use DMA to get at them.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Rather than bang MMRs directly, use the new portmux framework to handle
the details.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Rather than bang MMRs directly, use the new portmux framework to handle
the details.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Rather than bang MMRs directly, use the new portmux framework to handle
the details.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Rather than bang MMRs directly, use the new portmux framework to handle
the details.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

The original BF518F-EZBRD's have a Micrel KSZ8893 DSA on them, but newer
ones only have a National PHY (which lack a RX Error interrupt line).  So
in the board eth init code, dynamically detect what is hooked up to the MAC
and handle each accordingly.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Much of the local bf533-stamp.h header is unused, and the few bits that
are are only needed in one file.  So move the few used bits out and punt
all the rest.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Rather than bang MMRs directly, use the new portmux framework to handle
the details.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Rather than bang MMRs directly, use the new portmux framework to handle
the details.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Rather than only support the pins dedicated as chip selects, utilize the
gpio framework to support any gpio pin.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Rather than bang MMRs directly, use the new portmux framework to handle
the details.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Use the new portmux framework to handle the details when possible.
Unfortunately, we cannot yet use this in the standalone initialization
logic, so we need to keep around the old portmux writes for now.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Rather than bang MMRs directly, use the new portmux framework to handle
the details.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Rather than bang MMRs directly, use the new portmux framework to handle
the details.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Rather than bang MMRs directly, use the new portmux framework to handle
the details.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Acked-by: NScott Wood <scottwood@freescale.com>

Rather than bang MMRs directly, use the new portmux framework to handle
the details.  While we're doing this, let boards declare the exact list
of pins they need in case there is one or two they don't actually have
hooked up.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Acked-by: NBen Warren <biggerbadderben@gmail.com>

Add edminiv2 board support for mv_egiga.
Add edminiv2 config to enable mv_egiga.
Signed-off-by: NAlbert Aribaud <albert.aribaud@free.fr>
Acked-by: NPrafulla Wadaskar <prafulla@marvell.com>
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

Add definitions and initialization in orion5x for mvgbe.
Add orion5x in mvgbe SoC includes.
Signed-off-by: NAlbert Aribaud <albert.aribaud@free.fr>
Acked-by: NPrafulla Wadaskar <prafulla@marvell.com>
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

Rename all references to kirkwood in mvgbe symbols
throughout the whole codebase.
Signed-off-by: NAlbert Aribaud <albert.aribaud@free.fr>
Acked-by: NPrafulla Wadaskar <prafulla@marvell.com>
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

Rename kirkwood_egiga.* to mvgbe.* and adjust makefile
and #include accordingly.
Signed-off-by: NAlbert Aribaud <albert.aribaud@free.fr>
Acked-by: NPrafulla Wadaskar <prafulla@marvell.com>
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

This configuration option allows SoCs without random
generation capability to fill in local MACs with a  fixed
rather than random value
Signed-off-by: NAlbert Aribaud <albert.aribaud@free.fr>
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

Change if (ok) {
	bunch of stuff
} else {
	error
}

to

if (error) {
	get out
}

proceed with bunch of stuff

Plus a few whitespace cleanups.
Signed-off-by: NScott Wood <scottwood@freescale.com>

This is a re-submission of the patch by Harald Welte
<laforge@openmoko.org> with minor modifications for rebase and changes
as suggested by Scott Wood <scottwood@freescale.com> [1] [2].

This patch enables the environment partition to have a run-time dynamic
location (offset) in the NAND flash.  The reason for this is simply that
all NAND flashes have factory-default bad blocks, and a fixed compile
time offset would mean that sometimes the environment partition would
live inside factory bad blocks. Since the number of factory default
blocks can be quite high (easily 1.3MBytes in current standard
components), it is not economic to keep that many spare blocks inside
the environment partition.

With this patch and CONFIG_ENV_OFFSET_OOB enabled, the location of the
environment partition is stored in the out-of-band (OOB) data of the
first block in flash. Since the first block is where most systems boot
from, the vendors guarantee that the first block is not a factory
default block.

This patch introduces the 'nand env.oob' command, which can be called
from the u-boot command line. 'nand env.oob get' reads the address of
the environment partition from the OOB data, 'nand env.oob set
{offset,partition-name}' allows the setting of the marker by specifying
a numeric offset or a partition name.

[1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/43916
[2] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/79195Signed-off-by: NBen Gardiner <bengardiner@nanometrics.ca>
Acked-by: NHarald Welte <laforge@gnumonks.org>

The example configuration files of nios2-generic board can generated
binary to run on the EP1C20, EP1S10, and EP1S40 boards. So the three
boards can be removed.

With nios2-generic approach, the fpga parameter header file can
be generated from hardware designs using tools. Porting u-boot for
nios2 boards is simplified. Vendors can supply their fpga parameter
file or patches to add a new nios2-generic board instance. There is
no need to include other boards support for nios2 in the u-boot
mainline.
Signed-off-by: NThomas Chou <thomas@wytron.com.tw>
Signed-off-by: NScott McNutt <smcnutt@psyent.com>

This patch enables the altera_spi and spi_flash drivers for the
nios2-generic board. It allows access to the EPCS/SPI flash on
the Altera EP1C20 board.
Signed-off-by: NThomas Chou <thomas@wytron.com.tw>
Tested-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NScott McNutt <smcnutt@psyent.com>

This patch adds the gpio usage request. The polarity is changed to
positive as suggested by Mike Frysinger.
Signed-off-by: NThomas Chou <thomas@wytron.com.tw>
Signed-off-by: NScott McNutt <smcnutt@psyent.com>

This will be used by nand_plat.
Signed-off-by: NThomas Chou <thomas@wytron.com.tw>
Signed-off-by: NScott McNutt <smcnutt@psyent.com>

This patch adds fdt support to boot linux, followed Michal's
work on microblaze.
Signed-off-by: NThomas Chou <thomas@wytron.com.tw>
Signed-off-by: NScott McNutt <smcnutt@psyent.com>

Follow the discussion of Charles Manning and Mike Frysinger.
Using gc_sections helps reduce image size.

Configuring for nios2-generic board...
Before,
   text    data     bss     dec     hex filename
 123979    3724   22892  150595   24c43 /tmp/u-boot/u-boot
After,
   text    data     bss     dec     hex filename
 115983    3800   22732  142515   22cb3 /tmp/u-boot/u-boot
Signed-off-by: NThomas Chou <thomas@wytron.com.tw>
Signed-off-by: NScott McNutt <smcnutt@psyent.com>