- 29 8月, 2007 1 次提交
-
-
由 Kim Phillips 提交于
and make some minor corrections to the FDT part of the README. Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
-
- 17 8月, 2007 1 次提交
-
-
由 Andy Fleming 提交于
The 85xx code now relies on CONFIG_HAS_ETH0 to determine whether to update TSEC1's device-tree node, so we need to add it to all the boards with TSECs. Do this for 83xx and 86xx, too, since they will eventually do something similar. Signed-off-by: NAndy Fleming <afleming@freescale.com>
-
- 16 8月, 2007 1 次提交
-
-
由 Andy Fleming 提交于
The tsec_info structure and array has a "flags" field for each ethernet controller. This field is the only reason there are settings. Switch to defining TSECn_FLAGS for each controller in the config header, and we can greatly simplify the array, and also simplify the addition of future boards. Signed-off-by: NAndy Fleming <afleming@freescale.com>
-
- 12 7月, 2007 1 次提交
-
-
由 Andy Fleming 提交于
Made the boot commands use device trees by default. Also moved the ramdisk to 1000000 (I think the previous address was getting overridden during boot). Signed-off-by: NAndy Fleming <afleming@freescale.com>
-
- 10 7月, 2007 1 次提交
-
-
由 Jon Loeliger 提交于
Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h used to be included but CONFIG_BOOTP_MASK was not defined. Remove lingering references to CFG_CMD_* symbols. Signed-off-by: NJon Loeliger <jdl@freescale.com>
-
- 05 7月, 2007 1 次提交
-
-
由 Jon Loeliger 提交于
Signed-off-by: NJon Loeliger <jdl@freescale.com>
-
- 17 5月, 2007 1 次提交
-
-
由 Kim Phillips 提交于
For all practical u-boot purposes, TSECs don't differ throughout the mpc8[356]xx families; reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx. Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
-
- 24 4月, 2007 1 次提交
-
-
由 Sergei Shtylyov 提交于
The PCI I/O space mapping for Freescale MPC8540ADS board was broken by commit 52c7a68b which failed to update the #define's describing the local address window used for the PCI I/O space accesses -- fix this and carry over the necessary changes into the MPC8560ADS code since the PCI I/O space mapping was also broken for this board (by the earlier commit 08745460). Add the comments clarifying how the PCI I/O space must be mapped to all the MPC85xx board config. headers. Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> board/mpc8540ads/init.S | 4 ++-- board/mpc8560ads/init.S | 4 ++-- include/configs/MPC8540ADS.h | 5 ++--- include/configs/MPC8541CDS.h | 2 +- include/configs/MPC8548CDS.h | 2 +- include/configs/MPC8560ADS.h | 8 ++++---- 6 files changed, 12 insertions(+), 13 deletions(-)
-
- 21 10月, 2006 1 次提交
-
-
由 Jon Loeliger 提交于
Introduced COFIG_FSL_I2C to select the common FSL I2C driver. And removed hard i2c path from a few u-boot.lds scipts too. Minor whitespace cleanups along the way. Signed-off-by: NJon Loeliger <jdl@freescale.com>
-
- 19 9月, 2006 1 次提交
-
-
由 Andy Fleming 提交于
-
- 10 8月, 2006 3 次提交
-
-
由 Matthew McClintock 提交于
* Added comments and a printf to warn that PCI-X won't work at 33MHz Patch by Andy Fleming 17-Mar-2006 Signed-off-by: NAndy Fleming <afleming@freescale.com>
-
由 Matthew McClintock 提交于
Signed-off-by: NAndy Fleming <afleming@freescale.com>
-
由 Matthew McClintock 提交于
Signed-off-by: NJon Loeliger <jdl@freescale.com>
-
- 28 6月, 2006 3 次提交
-
-
由 Matthew McClintock 提交于
* Added comments and a printf to warn that PCI-X won't work at 33MHz Patch by Andy Fleming 17-Mar-2006 Signed-off-by: NAndy Fleming <afleming@freescale.com>
-
由 Matthew McClintock 提交于
Patch by Andy Fleming 17-Mar-2006 Signed-off-by: NAndy Fleming <afleming@freescale.com>
-
由 Matthew McClintock 提交于
Patch by Jon Loeliger 17-Jan-2006 Signed-off-by: NJon Loeliger <jdl@freescale.com>
-
- 26 7月, 2005 2 次提交
-
-
由 Jon Loeliger 提交于
Implemented support for MPC8548CDS board. Added DDR II support based on SPD values for MPC85xx boards. This roll-up patch also includes bugfies for the previously published patches: DDRII CPO, pre eTSEC, 8548 LBIU, Andy's TSEC, eTSEC 3&4 I/O
-
由 Jon Loeliger 提交于
Add config option CONFIG_HAS_FEC calling out 8540 FEC features.
-
- 10 1月, 2005 1 次提交
-
-
由 wdenk 提交于
Reset monitor size back to 256 so environment can be written to flash on MPC85xx ADS and CDS releases. * Patch by Paolo Broggini, 02 Sep 2004: Make BSS clearing on ARM systems more robust * Patch by Yue Hu and Joe, 01 Sep 2004: - add PCI support for ixp425; - add EEPRO100 suppor tfor ixdp425 board. * Fix problem with protected sector detection in driver/cfi_flash.c
-
- 31 12月, 2004 1 次提交
-
-
由 wdenk 提交于
* Cleanup confusing use of CONFIG_ETH*ADDR - ust his only to pre-define a MAC address; use CONFIG_HAS_ETH* to enable support for additional ethernet addresses. * Cleanup drivers/i82365.c - avoid duplication of code * Fix bogus "cannot span across banks" flash error message * Add support for CompactFlash for the CPC45 Board.
-
- 11 10月, 2004 1 次提交
-
-
由 wdenk 提交于
- Fix PCI window on MPC85xx; remove unneeded PCI initialization from board_early_init_f() - Provide SW workaround for PCI initialization on 85xx CDS - Convert MPC85xxADS to use common CFI flash driver * Cleanup: avoid compiler warnings * Add CMC PU2 board to MAKEALL script
-
- 02 8月, 2004 1 次提交
-
-
由 wdenk 提交于
- support larger DDR memories up to 2G on the PC8540/8560ADS and STXGP3 boards - Made MPC8540/8560ADS be 33Mhz PCI by default. - Removed moldy CONFIG_RAM_AS_FLASH, CFG_FLASH_PORT_WIDTH_16 and CONFIG_L2_INIT_RAM options. - Refactor Local Bus initialization out of SDRAM setup. - Re-implement new version of LBC11/DDR11 errata workarounds. - Moved board specific PCI init parts out of CPU directory. - Added TLB entry for PCI-1 IO Memory - Updated README.mpc85xxads
-
- 10 7月, 2004 1 次提交
-
-
由 wdenk 提交于
Completion of the 8540ADS/8560ADS updates: Fix some PCI and Rapid I/O memory maps, Initialize both TSEC 1 and 2, Initialize SDRAM Update MAINTAINER for 85xx boards and README.mpc85xxads
-
- 21 1月, 2004 1 次提交
-
-
由 wdenk 提交于
before we can access it; add delay in case we are faster (with no CF card inserted) * Cleanup of some init functions * Make sure SCC Ethernet is always stopped by the time we boot Linux to avoid Linux crashes by early packets coming in. * Accelerate flash accesses on LWMON board by using buffered writes
-
- 16 10月, 2003 1 次提交
-
-
由 wdenk 提交于
- Added Motorola CPU 8540/8560 support (cpu/85xx) - Added Motorola MPC8540ADS board support (board/mpc8540ads) - Added Motorola MPC8560ADS board support (board/mpc8560ads) * Minor code cleanup
-