- 09 9月, 2015 1 次提交
-
-
由 Bin Meng 提交于
Move to driver model for RTC, USB and ETH on coreboot. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
- 31 8月, 2015 3 次提交
-
-
由 Simon Glass 提交于
This command provides a few useful tests so enable it for common boards. Signed-off-by: NSimon Glass <sjg@chromium.org> Acked-by: Christophe Ricard<christophe-h.ricard@st.com> Reviewed-by: NHeiko Schocher <hs@denx.de>
-
由 Simon Glass 提交于
Convert the tpm_tis_lpc driver to use driver model and update boards which use it. Signed-off-by: NSimon Glass <sjg@chromium.org> Acked-by: Christophe Ricard<christophe-h.ricard@st.com> Reviewed-by: NHeiko Schocher <hs@denx.de>
-
由 Simon Glass 提交于
Convert all TPM options to Kconfig and tidy up. Signed-off-by: NSimon Glass <sjg@chromium.org> Acked-by: NChristophe Ricard <christophe-h.ricard@st.com> Reviewed-by: NHeiko Schocher <hs@denx.de>
-
- 22 8月, 2015 1 次提交
-
-
由 Simon Glass 提交于
Move config for the E1000 Ethernet driver to Kconfig and tidy up affected boards. Signed-off-by: NSimon Glass <sjg@chromium.org> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
- 26 6月, 2015 2 次提交
-
-
由 Joe Hershberger 提交于
This sets the default commands Kconfig to match include/config_cmd_default.h commands in the common/Kconfig and removes them from include/configs. Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com> [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates] Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Joe Hershberger 提交于
Some archs/boards specify their own default by pre-defining the config which causes the Kconfig system to mix up the order of the configs in the defconfigs... This will cause merge pain if allowed to proliferate. Remove the configs that behave this way from the archs. A few configs still remain, but that is because they only exist as defaults and do not have a proper Kconfig entry. Those appear to be: SPIFLASH DISPLAY_BOARDINFO Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com> [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates, drop DM_USB from MSI_Primo81 as USB_MUSB_SUNXI isn't converted yet to DM] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 04 6月, 2015 2 次提交
-
-
由 Bin Meng 提交于
QEMU is much easier for us test booting U-Boot as a coreboot payload than having a real board like chromebook_link. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org> Tested-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
Now that we have QEMU support, make it the default vendor in the 'make menuconfig' screen. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org> Tested-by: NSimon Glass <sjg@chromium.org>
-
- 01 6月, 2015 1 次提交
-
-
由 Joe Hershberger 提交于
This also selects CONFIG_NET for any CONFIG_CMD_NET board. Remove the imx default for CONFIG_NET. This moves the config that was defined by 60296a83 (commands: add more command entries in Kconfig). Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
-
- 13 5月, 2015 1 次提交
-
-
由 Joe Hershberger 提交于
In order to reduce merge conflicts and to maintain the simplest possible defconfig files, we should be using the savedefconfig feature of Kconfig every time a new feature is added. This keeps the defconfig settings to a minimum (only those things not default) and keeps them in the same order as the Kconfig options. Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: NStephen Warren <swarren@wwwdotorg.org> Cc: Tom Rini <trini@konsulko.com>
-
- 30 4月, 2015 2 次提交
-
-
由 Bin Meng 提交于
Currently all x86 boards still use CONFIG_SYS_EXTRA_OPTIONS to define the text base address. Since it is deprecated, just remove it and use CONFIG_SYS_TEXT_BASE directly. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
Let arch/x86/Kconfig prompt board vendor first, then select the board model under that vendor. This way arch/x86/Kconfig only needs concern board vendor and leave the supported target list to board/<vendor>/Kconfig. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
- 19 4月, 2015 1 次提交
-
-
由 Simon Glass 提交于
Move coreboot-x86 over to driver model for PCI. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 13 1月, 2015 1 次提交
-
-
由 Bin Meng 提交于
Change SYS_CONFIG_NAME and DEFAULT_DEVICE_TREE to chromebook_link which is currently the only real board officially supported to run U-Boot loaded by coreboot. Note the symbolic link file chromebook_link.dts is deleted and link.dts is renamed to chromebook_link.dts. To avoid multiple definition of video_hw_init, the CONFIG_VIDEO_X86 define needs to be moved to arch/x86/cpu/ivybridge/Kconfig. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
- 25 9月, 2014 2 次提交
-
-
由 Masahiro Yamada 提交于
This option specifies the default Device Tree used for the run-time configuration of U-Boot. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Simon Glass <sjg@chromium.org> Cc: Stephen Warren <swarren@nvidia.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Michal Simek <michal.simek@xilinx.com>
-
由 Masahiro Yamada 提交于
This commit moves: CONFIG_OF_CONTROL CONFIG_OF_SEPARATE CONFIG_OF_EMBED CONFIG_OF_HOSTFILE Because these options are currently not supported for SPL, the "Device Tree Control" menu does not appear in the SPL configuration. Note: zynq-common.h should be adjusted so as not to change the default value of CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: NSimon Glass <sjg@chromium.org> Cc: Stephen Warren <swarren@nvidia.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Acked-by: NMichal Simek <michal.simek@xilinx.com>
-
- 30 7月, 2014 1 次提交
-
-
由 Masahiro Yamada 提交于
This commit adds: - arch/${ARCH}/Kconfig provide a menu to select target boards - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig set CONFIG macros to the appropriate values for each board - configs/${TARGET_BOARD}_defconfig default setting of each board (This commit was automatically generated by a conversion script based on boards.cfg) In Linux Kernel, defconfig files are located under arch/${ARCH}/configs/ directory. It works in Linux Kernel since ARCH is always given from the command line for cross compile. But in U-Boot, ARCH is not given from the command line. Which means we cannot know ARCH until the board configuration is done. That is why all the "*_defconfig" files should be gathered into a single directory ./configs/. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: NSimon Glass <sjg@chromium.org>
-