Support for the Blackfin System Development Platform (SDP) base module.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NPeter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

The input sub command was missing from the help text, and it didn't show
the actual value currently read on the GPIO.  This allows people to read
the value of input pins.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

The CONFIG_BFIN_CPU option is largely used in the build system, so move
it out of the board config.h and into the board config.mk.  It'd be nice
to keep everything in the config.h, but the patch to extract that value
early was rejected.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Only the BF561 port was using the common dual core headers, so merge them
into the BF561 specific headers.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Only the BF533 port was using the common extended headers, so merge them
into the BF533 specific headers.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NMike Frysinger <vapier@gentoo.org>

These are unused now, so punt them to clean things up.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

The old MMR defines are being scrubbed, so convert the driver to use the
new standard helper macros.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

The old MMR defines are being scrubbed, so convert the driver to use the
new standard helper macros.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

The old MMR defines are being scrubbed, so convert the driver to use the
new standard helper macros.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

The old MMR defines are being scrubbed, so convert the driver to use the
new standard helper macros.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

The old MMR defines are being scrubbed, so convert the driver to use the
new standard helper macros.

For the GPIO MMR usage, convert to the new GPIO framework.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

The old MMR defines are being scrubbed, so convert the driver to use the
new standard helper macros.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

There is no BF541 processor variant, so punt headers for it.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Simplify the command setup and status checking steps, and add a proper
timeout to the status polling code to avoid possible infinite hangs.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

This moves the last piece from the old spi_flash driver to the new SPI
framework -- optional DMA RX support.  This typically cuts speeds by ~40%
at the cost of additional ~300 bytes.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Conflicts:
	include/ppc4xx.h
Signed-off-by: NWolfgang Denk <wd@denx.de>

Signed-off-by: NWolfgang Denk <wd@denx.de>

Commit 800eb096 "POST cleanup." removed file
arch/powerpc/cpu/mpc512x/common.c but failed to remove the reference
to it from arch/powerpc/cpu/mpc512x/Makefile which causes somewhat
obscure build errors:

make[1]: *** No rule to make target `/work/wd/tmp-ppc/arch/powerpc/cpu/mpc512x/.depend', needed by `_depend'.  Stop.

Fix these.
Signed-off-by: NWolfgang Denk <wd@denx.de>

This patch adds missing pinmux setup for 4 GPIO signals used on the Beagle xM:
 - USB hub reset (gpio_56)
 - P8 USB hub reset (gpio_63)
 - DVI enable (gpio_129)
 - P8 DVI enable (gpio_170)
Signed-off-by: NSteve Sakoman <steve@sakoman.com>
Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>

Calculate the SDRAM size from DMM configuration registers instead of using
hard-coded values. This gives correct values for all different boards.

It's assumed that DMM sections do not overlap memory areas.
Signed-off-by: NAneesh V <aneesh@ti.com>
Tested-by: NSteve Sakoman <steve@sakoman.com>
Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>

This patch corrects the pinmux settings to enable proper functioning
of the wifi/bluetooth module.
Signed-off-by: NSteve Sakoman <steve@sakoman.com>
Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>

Signed-off-by: NThomas Weber <weber@corscience.de>

Signed-off-by: NThomas Weber <weber@corscience.de>

Add OSE as operating system for mkimage and bootm.
Signed-off-by: NTorkel Lundgren <torkel.lundgren@enea.com>

The version numbering scheme was changed in Oct, 2008.
This patch brings the documentation to the actual level.
The description is taken from:
http://www.denx.de/wiki/U-Boot/ReleaseCycleSigned-off-by: NThomas Weber <weber@corscience.de>

Changed text slightly.
Signed-off-by: NWolfgang Denk <wd@denx.de>

Commit 2ee951ba (UBI: Enable re-initializing of the "ubi part" command)
reset mtd_devs in ubi_exit() but missed ubi_init()'s failure path.
Signed-off-by: NKarl Beldan <karl.beldan@gmail.com>
Cc: Stefan Roese <sr@denx.de>
Signed-off-by: NStefan Roese <sr@denx.de>

This change lays the groundwork for the BOOTFLAG_* flags being removed.

This change has the small affect of delaying 100ms on PCI initialization
after a warm boot as opposed to the optimal 1ms on some boards.
Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>

included the mpc8308_p1m board.
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>

continuation of commit 39da1ba923d55f316f9f1bb3a960e4ed91dc17ac:
"e300: increase CONFIG_SYS_BOOTMAPSZ to allow booting large kernels"
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>

Configuring for MPC8308RDB board...
pcie.c: In function 'mpc83xx_pcie_register_hose':
pcie.c:143: warning: assignment makes pointer from integer without a cast
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>

This patch provides support for MPC8308 P1M board with the following
set of features:
 Dual UART is supported
 NOR flash is supported
 Both TSEC Ethernet controllers are supported
 PCI Express initialization is supported
 Both I2C controllers are supported
Signed-off-by: NIlya Yanok <yanok@emcraft.com>
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>