- 01 5月, 2017 11 次提交
-
-
由 Tom Rini 提交于
With 3f66149d we no longer have a common call fdt_fixup_ethernet. This was fine to do on PowerPC as they largely had calls already in ft_cpu_fixup. On ARM however we largely relied on this call. Rather than introduce a large number of changes to ft_cpu_fixup / ft_board_fixup we recognize that this is a common enough call that we should be doing it in a central location. Do it early enough that we can do any further updates in ft_cpu_fixup / ft_board_fixup. Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Thomas Chou <thomas@wytron.com.tw> (maintainer:NIOS) Cc: York Sun <york.sun@nxp.com> (maintainer:POWERPC MPC85XX) Cc: Stefan Roese <sr@denx.de> (maintainer:POWERPC PPC4XX) Cc: Simon Glass <sjg@chromium.org> Cc: Joakim Tjernlund <Joakim.Tjernlund@infinera.com> Fixes: 3f66149d ("Remove extra fdt_fixup_ethernet() call") Signed-off-by: NTom Rini <trini@konsulko.com> Acked-by: NStefan Roese <sr@denx.de> Acked-by: NYork Sun <york.sun@nxp.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Chris Packham 提交于
Signed-off-by: NChris Packham <judge.packham@gmail.com> [trini: default y if DM_RTC, re-sync] Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_CMD_DISPLAY Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_CMD_DIAG Signed-off-by: NSimon Glass <sjg@chromium.org> [trini: imply CMD_DIAG on some keymile configs] Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Simon Glass 提交于
Rather than using CMD_CRAMFS for both the filesystem and its command, we should have a separate option for each. This allows us to enable CRAMFS support without the command, if desired, which reduces U-Boot's size slightly. Signed-off-by: NSimon Glass <sjg@chromium.org> [trini: imply FS_CRAMFS for keymile] Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_CMD_CRAMFS Signed-off-by: NSimon Glass <sjg@chromium.org> [trini: imply CMD_CRAMFS for keymile] Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_CMD_CLK Signed-off-by: NSimon Glass <sjg@chromium.org> [trini: imply CMD_CLK on ARCH_ZYNQ] Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_CMD_CHIP_CONFIG Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Rather than using CMD_CBFS for both the filesystem and its command, we should have a separate option for each. This allows us to enable CBFS support without the command, if desired, which reduces U-Boot's size slightly. Signed-off-by: NSimon Glass <sjg@chromium.org> [trini: imply FS_CBFS on SYS_COREBOOT] Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_CMD_CBFS Signed-off-by: NSimon Glass <sjg@chromium.org> [trini: imply CMD_CBFS on SYS_COREBOOT] Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_SYS_WHITE_ON_BLACK Signed-off-by: NSimon Glass <sjg@chromium.org> [trini: Make this default y on various SoCs] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 30 4月, 2017 8 次提交
-
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_CMD_BSP Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_CMD_BMP Signed-off-by: NSimon Glass <sjg@chromium.org> [trini: Add depends on LCD || DM_VIDEO || VIDEO] Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_CMD_BMODE Signed-off-by: NSimon Glass <sjg@chromium.org> [trini: Make this default y and depend on mx5/6/7] Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_CMD_BEDBUG Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_CMD_BAT Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_CMD_AES CONFIG_AES Signed-off-by: NSimon Glass <sjg@chromium.org> [trini: Add select AES to CMD_AES] Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_PMIC_AS3722 Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Tom Rini 提交于
A few boards had not been fully re-synced with CONFIG_ARCH_MX5 / CONFIG_MX51 / CONFIG_MX53 being in Kconfig. Do so now. Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 28 4月, 2017 5 次提交
-
-
由 Masahiro Yamada 提交于
In Linux, CONFIG_ARCH_OMAP2PLUS is used for OMAP2 or later SoCs. Rename CONFIG_ARCH_OMAP2 to CONFIG_ARCH_OMAP2PLUS to follow this naming. Move the OMAP2+ board/SoC choice down to mach-omap2/Kconfig to slim down the arch/arm/Kconfig level. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Andrew F. Davis 提交于
Almost all TI defconfigs enable this already, add this as a default and remove the explicit assignment. Signed-off-by: NAndrew F. Davis <afd@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Philipp Tomsich 提交于
This originally started out as "pinctrl: Kconfig: reorder to keep Rockchip options together" and tried to keep the Rockchip-related config options together. However, we now rewrite all chip-specific driver selections to start with CONFIG_PINCTRL_ (with the inadvertent changes to related Makefiles) and sort those alphabetically. And as this already means touching most of the file, we also reformat the help text to not exceed 80 characters (but make full use of those 80 characters). Signed-off-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Unfortunately a test for the PWM uclass was not included when it was submitted. This was noticed when trying to add more functionality: http://patchwork.ozlabs.org/patch/748172/ Add a simple test to get us started. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Lokesh Vutla 提交于
Standardise U-Boot prompt on all keystone2 platforms instead of platform specific prompt. Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
- 27 4月, 2017 1 次提交
-
-
由 Michal Simek 提交于
Remove option which depends on MMC controller which is disabled for dc2. Savedefconfig is removing it because of new dependencies. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
- 25 4月, 2017 3 次提交
-
-
由 Dalon Westergreen 提交于
Add support for the Terasic DE10-Nano board. The board is based on the DE0-Nano-Soc board but adds a larger FPGA and an HDMI output. Signed-off-by: NDalon Westergreen <dwesterg@gmail.com> Reviewed-by: NDinh Nguyen <dinguyen@kernel.org>
-
由 Sumit Garg 提交于
Signed-off-by: NSumit Garg <sumit.garg@nxp.com> Signed-off-by: NUdit Agarwal <udit.agarwal@nxp.com> Tested-by: NVinitha Pillai <vinitha.pillai@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
由 Hou Zhiqiang 提交于
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
- 21 4月, 2017 1 次提交
-
-
由 Icenowy Zheng 提交于
Lichee Pi Zero is a development board with a V3s SoC, which features 64MiB DRAM co-packaged within the SoC, a TF slot, a SPI NOR slot (not soldered in production batch), a 40-pin RGB LCD connector and some extra pins available as 2.54mm pins or stamp holes. Add support for it. Signed-off-by: NIcenowy Zheng <icenowy@aosc.io> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
- 20 4月, 2017 11 次提交
-
-
由 Masahiro Yamada 提交于
This configuration is supposed to be used with ARM Trusted Firmware, so the SYSTEM_RESET is implemented in BL31. Invoke PSCI instead of U-Boot's own reset code because we need to coordinate with SCP (System Control Processor) for the system-level power management. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Chen-Yu Tsai 提交于
The Bananapi M2 Ultra is the first publicly available development board featuring the R40 SoC. This patch add barebone dtsi/dts files for the R40 and Bananapi M2 Ultra, as well as a defconfig for it. Signed-off-by: NChen-Yu Tsai <wens@csie.org> Acked-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Mylène Josserand 提交于
Convert the CONS_INDEX configuration to Kconfig. Update sunxi's defconfigs to remove SYS_EXTRA_OPTIONS variable not needed anymore. Default value is 1 except for sun5i (equals 2) and sun8i (equals 5). Signed-off-by: NMylène Josserand <mylene.josserand@free-electrons.com> [Maxime: Added a depends on ARCH_SUNXI to avoid build breakages] Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Mylène Josserand 提交于
Convert the CONFIG_MACPWR to Kconfig and update all the sunxi defconfigs that used it in SYS_EXTRA_OPTIONS. Signed-off-by: NMylène Josserand <mylene.josserand@free-electrons.com> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Mylène Josserand 提交于
Convert the CONFIG_SATAPWR into kconfig. Thanks to that, many SYS_EXTRA_OPTIONS can be removed from some defconfigs. Signed-off-by: NMylène Josserand <mylene.josserand@free-electrons.com> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Mylène Josserand 提交于
Convert CONFIG_RGMII to Kconfig. Thanks to that, it is possible to update defconfig files of SYS_EXTRA_OPTIONS accordingly and remove it when it is possible. Signed-off-by: NMylène Josserand <mylene.josserand@free-electrons.com> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Mylène Josserand 提交于
Convert the SUNXI_EMAC config to Kconfig. Remove it from SYS_EXTRA_OPTIONS from many sunxi defconfig and renamed it into SUN4I_EMAC to not confuse it with SUN8I_EMAC. Signed-off-by: NMylène Josserand <mylene.josserand@free-electrons.com> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Mylène Josserand 提交于
The USB_EHCI configuration is already set in this defconfig using kconfig's config. This configuration in SYS_EXTRA_OPTIONS must be removed and so the SYS_EXTRA_OPTIONS. Signed-off-by: NMylène Josserand <mylene.josserand@free-electrons.com> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Mylène Josserand 提交于
This configuration is not necessary in a defconfig file so it is removed from the SYS_EXTRA_OPTIONS. Signed-off-by: NMylène Josserand <mylene.josserand@free-electrons.com> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Mylène Josserand 提交于
Remove the AXP209_POWER option from SYS_EXTRA_OPTIONS. As this configuration already exists on Kconfig, we just need to remove it from defconfig. Signed-off-by: NMylène Josserand <mylene.josserand@free-electrons.com> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Mylène Josserand 提交于
Move the SUNXI_GMAC config option to Kconfig, remove it from SYS_EXTRA_OPTIONS and rename it into SUN7I_GMAC. Signed-off-by: NMylène Josserand <mylene.josserand@free-electrons.com> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-