While inserting it into the new location, keep it sorted by the
register base offset just like in the linux kernel device tree.
Signed-off-by: NMichael Walle <michael@walle.cc>
Reviewed-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

While inserting them into the new location, keep them sorted by the
register base offset just like in the linux kernel device tree.

While at it fix the indentation.
Signed-off-by: NMichael Walle <michael@walle.cc>
Reviewed-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

While inserting them into the new location, keep them sorted by the
register base offset just like in the linux kernel device tree.
Signed-off-by: NMichael Walle <michael@walle.cc>
Reviewed-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

While inserting them into the new location, keep them sorted by the
register base offset just like in the linux kernel device tree.
Signed-off-by: NMichael Walle <michael@walle.cc>
Reviewed-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

While inserting them into the new location, keep them sorted by the
register base offset just like in the linux kernel device tree.
Signed-off-by: NMichael Walle <michael@walle.cc>
Reviewed-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

While inserting them into the new location, keep them sorted by the
register base offset just like in the linux kernel device tree.
Signed-off-by: NMichael Walle <michael@walle.cc>
Reviewed-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

While inserting them into the new location, keep them sorted by the
register base offset just like in the linux kernel device tree.
Signed-off-by: NMichael Walle <michael@walle.cc>
Reviewed-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

While inserting it into the new location, keep it sorted by the
register base offset just like in the linux kernel device tree.
Signed-off-by: NMichael Walle <michael@walle.cc>
Reviewed-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

While inserting them into the new location, keep them sorted by the
register base offset just like in the linux kernel device tree.
Signed-off-by: NMichael Walle <michael@walle.cc>
Reviewed-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Populate the /soc node with the first device node.
Signed-off-by: NMichael Walle <michael@walle.cc>
Reviewed-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

To keep the device tree similar to the linux kernel one, we need to move
all CCSR related devices into the /soc node. To keep the patches easy to
review, we initially add an empty /soc node and populate it piece by
piece.
Signed-off-by: NMichael Walle <michael@walle.cc>
Reviewed-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Nowadays, both boards boot using the TF-A BL1/BL2 and SPL isn't used at
all. The property is not needed, remove it.
Signed-off-by: NMichael Walle <michael@walle.cc>
Reviewed-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

This node is some hodgepodge between the ddr controller node at SoC
offset 0x1080000 and some static memory size of 2GiB. Remove this bogus
node because it doesn't seem to be used at all.
Signed-off-by: NMichael Walle <michael@walle.cc>
Reviewed-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

There is no "fsl,ls1028a-gpu" compatible string. It is solely for the
proprietary driver which will never be open source. Lately, linux gained
support for the open source etnaviv driver for the GPU (although there
is still support for the DisplayPort PHY missing to get actual graphics
output). Thus, instead of supporting some proprietary driver, switch
over to the open source one, which also have an official device tree
binding.

Cc: Andy Tang <andy.tang@nxp.com>
Signed-off-by: NMichael Walle <michael@walle.cc>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Adds check for memory clock variable before calculating caslat_actual.

Set mclk_ps to slowest DIMM supported if mclk_ps is found zero.
Signed-off-by: NManinder Singh <maninder.singh_1@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Extended fsl_mc command adding an extra option dump_log
Signed-off-by: NCosmin-Florin Aluchenesei <aluchenesei.cosmin-florin@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

This has not been supported by toolchains for some time and has been
putting out a warning.  Drop this.
Signed-off-by: NTom Rini <trini@konsulko.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Remove "num-cs" property from device-tree as it is no longer used by
qspi driver anymore.

Also, specify status as "disabled" and enable qspi support in respective
board dts files. This will also help in aligning node properties with
other board properties.
Signed-off-by: NKuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Document the update image and how to use the EFI UpdateCapsule.
Signed-off-by: NMichael Walle <michael@walle.cc>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

In order to add other Kontron boards to the docs alongside the existing sl28 board,
we need to reduce the levels of the sections and change the title.

Cc: Fabio Estevam <festevam@gmail.com>
Signed-off-by: NFrieder Schrempf <frieder.schrempf@kontron.de>
Acked-by: NMichael Walle <michael@walle.cc>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Enable support for update over EFI UpdateCapsule mechanism. This board
doesn't support setting EFI variables after ExitBootservices().
Therefore, we are also enabling EFI_IGNORE_OSINDICATIONS.
Signed-off-by: NMichael Walle <michael@walle.cc>
[Rebased]
Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>

Generate a FIT update image during build. The image will be called
"u-boot.update" and can be used to build an EFI UpdateCapsule or during
DFU mode. Although, the latter isn't supported because there is no USB
OTG driver yet.
Signed-off-by: NMichael Walle <michael@walle.cc>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Allow EFI to actually set the time before ExitBootServices().
Signed-off-by: NMichael Walle <michael@walle.cc>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Increase fdt blob size for lx2160 and lx2162 series
to fix below errors/warnings during device tree fixup.

Unable to update property /soc/spi@2100000:status, err=FDT_ERR_NOSPACE
Unable to update property /soc/spi@2110000:status, err=FDT_ERR_NOSPACE
Unable to update property /soc/spi@2120000:status, err=FDT_ERR_NOSPACE
WARNING: could not set reg FDT_ERR_NOSPACE.
WARNING unable to set iommus: FDT_ERR_NOSPACE
Signed-off-by: NWasim Khan <wasim.khan@nxp.com>
Reviewed-by: NTom Rini <trini@konsulko.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Remove Double free issue from calc_img_key_hash() and
calc_esbchdr_esbc_hash() function.
Verified the secure boot changes using lx2162aqds board.
Signed-off-by: NKshitiz Varshney <kshitiz.varshney@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

LX2162A-QDS has micron mt35xu512aba flash which requires flag
CONFIG_SPI_FLASH_MT35XU on to probe flash successfully.
Signed-off-by: NKuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: NWasim Khan <wasim.khan@nxp.com>
Tested-by: NWasim Khan <wasim.khan@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Disabling PCIE support currently lead to a crash because the code for
erratum A010315 is still run. Add a conditional to only select
CONFIG_SYS_FSL_ERRATUM_A010315 when CONFIG_PCIE_LAYERSCAPE is enabled.
Signed-off-by: NAlban Bedel <alban.bedel@aerq.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Rename emmc_bootcmd environment variable to sd2_bootcmd
to fix emmc boot on lx2162aqds board.
Signed-off-by: NMeenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Set popts->cpo_sample to 0x54 in t104xrdb/ddr.c to optimize cpo
Signed-off-by: NPriyanka Singh <priyanka.singh@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Fix Bad Shift operator issue in step_to_string function
by adding an if check
Signed-off-by: NPriyanka Singh <priyanka.singh@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Fix possible divide by zero issue in fsl_ddr_set_memctl_regs
by adding an if check
Signed-off-by: NPriyanka Singh <priyanka.singh@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Fix possible divide by zero issue in get_memory_clk_period_ps
by adding a check
Signed-off-by: NPriyanka Singh <priyanka.singh@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Pull request for efi-2022-01-rc2

Documentation:
* improve description of mmc rescan
* remove obsolete PPC documenation

UEFI
* Provide unit test for the EFI_TCG2_PROTOCOL
* Implement add EFI_TCG2_PROTOCOL.SubmitCommand
* Start the implementation of a 64 bit EFI app
* Reduce rcar3_salvator-x image size

Currently output of dfu commands ends on a line with leading hash signs
('#'). The succeeding output should be placed on a new line.

After writing updates via dfu print a new line.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: NHeinrich Schuchardt <heinrich.schuchardt@canonical.com>

rcar3_salvator-x u-boot.img is very close to the 0x100000 size limit.

Disable support for Unicode capitalization.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

This commit adds the missing EFI_TCG2_PROTOCOL selftest
and Measured Boot selftest in lib/efi_selftest.

This selftest includes PE/COFF image measurement test, some PCR values are
different in each architecture. With that, this commit also adds pre-built
versions of lib/efi_selftest/efi_miniapp_file_image_exit.c for PE/COFF
image measurement test for 32-bit arm, arm64, ia32, x86_64, riscv32 and
riscv64. Prebuilding avoids the problem of reproducible builds.
Signed-off-by: NMasahisa Kojima <masahisa.kojima@linaro.org>

Make the test 'onrequest'.
Add code comments to the includes with the binaries.
Reviewed-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

The current EFI video driver only works when running in the stub. In that
case the stub calls boot services (before jumping to U-Boot proper) and
copies the graphics info over to the efi table. This is necessary because
the stub exits boot services before jumping to U-Boot.

The app maintains access to boot services throughout its life, so does not
need to do this. Update the driver to support calling boot services
directly.

Enable video output for the app. Note that this uses the
EFI_GRAPHICS_OUTPUT_PROTOCOL protocol, even though it mentions vesa.

A sample qemu command-line for this case is:

   qemu-system-x86_64 -bios /usr/share/edk2.git/ovmf-ia32/OVMF-pure-efi.fd
   -drive id=disk,file=try.img,if=none,format=raw -nic none
   -device ahci,id=ahci -device ide-hd,drive=disk,bus=ahci.0
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

Add a function to return this information along with a stub for the
efi_info_get() function, since calling it otherwise hangs U-Boot.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

This variable is already defined by the EFI code. Drop the duplicate
definition when building a 64-bit EFI app.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

Most modern platforms use 64-bit EFI so it is useful to have a U-Boot app
that runs under that. Add a (non-functional) build for this.

Note that --whole-archive causes the gcc 9.2 linker to crash, so disable
this for now. Once this is resolved, things should work.

For now, avoid mentioning the documentation for the 64-bit app, since it
does not work.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>