- 19 8月, 2017 6 次提交
-
-
git://github.com/agraf/u-boot由 Tom Rini 提交于
EFI Fixes for 2017.09: - Fix GOP w/o display - Fix LocateHandle - Fix exit return value truncation - Fix missing EFIAPI in efi_locate_handle (for x86)
-
-
-
-
由 Kever Yang 提交于
Fix the IOMUX setting for SDcard CMD pin at the same time. Signed-off-by: NKever Yang <kever.yang@rock-chips.com> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
-
由 Kever Yang 提交于
The dts from kernel is using rk3228-pinctrl as compatible name, need to sync with it to make the driver work. Signed-off-by: NKever Yang <kever.yang@rock-chips.com> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
-
- 18 8月, 2017 10 次提交
-
-
由 Kever Yang 提交于
The description for eMMC/SDIO/SDMMC src is not correct, update the CRU_CLKSEL11_CON value definition according to TRM. Signed-off-by: NKever Yang <kever.yang@rock-chips.com> Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
-
由 Kever Yang 提交于
The DRAM start address is not 0, so need to update the last bank size as: DRAM start addr + DRAM_SIZE - last bank start addr Signed-off-by: NKever Yang <kever.yang@rock-chips.com> Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Philipp Tomsich 提交于
fdtdec.h is included, but not used in rk3399-board-spl.c: remove the '#include'-statement. Signed-off-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
-
由 Kever Yang 提交于
There are two same gmac node, remove one. Signed-off-by: NKever Yang <kever.yang@rock-chips.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
-
由 xypron.glpk@gmx.de 提交于
UEFI API functions have different return types. Some return a value of type EFI_STATUS other don't. We therefore should not cast the return value of EFI_EXIT to another type than the expression passed to EFI_EXIT. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Bin Meng 提交于
This changes pci_mmc driver to use PCI_CLASS_SYSTEM_SDHCI instead of individual vendor id & device id pair to support generic PCI SD host controller. Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Angelo Dureghello 提交于
Sysam stmark2 board is a generic and fully (hw and sw) open board, with a mcf54415 Coldfire CPU, 128MB of DDR2, 16MB of SPI flash and SD card as non volatile memories, and a wifi module included on-board. The board is actually used mainly for Coldfire custodian testing activity related to the mcf5441x Coldfire family. For further information please see: http://sysam.it/cff_stmark2.htmlSigned-off-by: NAngelo Dureghello <angelo@sysam.it> --- Changes in v2: - remove CMD_REGINFO - add board information in commit message
-
由 Angelo Dureghello 提交于
On some boards, CONFIG_SYS_CS0_BASE can be undefined, since CS0 is not connected to any signal. Signed-off-by: NAngelo Dureghello <angelo@sysam.it>
-
由 Angelo Dureghello 提交于
- fix cache.c CONFIG_CF_V4e to CONFIG_CF_V4E - fix cache.c to properly enable/disable cache for V4E Signed-off-by: NAngelo Dureghello <angelo@sysam.it>
-
由 Angelo Dureghello 提交于
For certain boot types and sbf, for V4 cpu's, an early ddr/sdram init is required. This patch moves this ddr/sdram early initalization away from start.S (to be board related). Signed-off-by: NAngelo Dureghello <angelo@sysam.it>
-
- 17 8月, 2017 24 次提交
-
-
由 Philipp Tomsich 提交于
During the the conversion to $(SPL_TPL_), the SPL_ fragment was left over for the NOR, XIP and YMODEM boot methods in SPL, making these unselectable. This commit fixes this by dropping the spurious 'SPL_' fragment from each line. Signed-off-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Reported-by: NBo Shen <voice.shen@gmail.com> Fixes: f94e643e (spl: consistently use $(SPL_TPL_) to select features for SPL and TPL builds)
-
由 Kever Yang 提交于
Update the tx_delay and rx_delay to match the timing for rk3399-firefly board to improve the stability of gmac data transfer. Signed-off-by: NKever Yang <kever.yang@rock-chips.com> Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
-
由 Angelo Dureghello 提交于
This patch allows to show the EXT_CSD[179] partition_config register info, just by specifying the dev param: U-Boot> mmc partconf 0 EXT_CSD[179], PARTITION_CONFIG: BOOT_ACK: 0x0 BOOT_PARTITION_ENABLE: 0x0 PARTITION_ACCESS: 0x0 Signed-off-by: NAngelo Dureghello <angelo@sysam.it> Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
由 Simon Glass 提交于
All boards which use DM_MMC have now been converted to use DM_MMC_OPS. Drop the option and good riddance. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This should depend on SPL_DM_MMC, not SPL_DM. For it and update the only affected board's defconfig. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Now that the driver supports it, move these boards over to use driver model fully for MMC. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Enable driver model for MMC (including BLK), SATA and USB. Note that USB does not yet work correctly since the nodes are disabled. Hopefully this can be resolved by the maintainer. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
When CONFIG_BLK is enabled our weak board_mmc_init() will not be called. Since there is no clock driver for MX6 yet, we must manually enable the clocks. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Add this file so we can use device-tree control for cm_fx6. It comes from linux 4.12. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Add support for using driver model for SATA with the cm_fx6 board. The old code remains for now to permit testing. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This driver does not currently support CONFIG_DM_MMC_OPS. Update it to fully convert it to driver model. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Update this driver to support a live device tree. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
We want to use fsl_esdhc_init() with driver model. Move the mmc_init() out of this function so that we can use it for our common init. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
With driver model we want to store the mmc and configuration structure in platform data. Set up structure up and use it for non-DM as well. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Since esdhc_init_common() can fail it should return an error code. Update this and also adjust the timeout mechanism to use get_timer(), which is a more common approach. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Since esdhc_reset() can fail it should return an error code. Update this and also adjust the timeout mechanism to use get_timer(), which is a more common approach. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Driver model wants to use the core functions in this file but accesses the driver-private data in a different way. Move the code into new 'common' functions and set up stubs to call these. Also sort the operations into alphabetical order for consistency. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
With driver model we will not use mmc->priv to access driver-private data. To accomodate this, update internal functions so that we can pass the private data directly. This will allow the caller to obtain it as it prefers. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Update this driver to support driver model. This involves implementing the AHCI operations and reusing existing common code. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
At present the AHCI uclass is just a shell and we still use the global functions to access SATA. Fix this by adding operations to the uclass. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Update the sata call to work with driver model. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Update this command to support driver model. This has a different way of starting and stopping SATA. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Driver model wants to use the core functions in this file but accesses the uclass-private data in a different way. Move the code into new 'common' functions and set up stubs to call these. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This function will not be used with driver model and it relates to the other exported functions. Move it down next to them. Signed-off-by: NSimon Glass <sjg@chromium.org>
-