Signed-off-by: NÁlvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: NDaniel Schwierzeck <daniel.schwierzeck@gmail.com>

Signed-off-by: NÁlvaro Fernández Rojas <noltari@gmail.com>

Signed-off-by: NÁlvaro Fernández Rojas <noltari@gmail.com>

Signed-off-by: NÁlvaro Fernández Rojas <noltari@gmail.com>

Signed-off-by: NÁlvaro Fernández Rojas <noltari@gmail.com>

Signed-off-by: NÁlvaro Fernández Rojas <noltari@gmail.com>

Signed-off-by: NÁlvaro Fernández Rojas <noltari@gmail.com>

Signed-off-by: NÁlvaro Fernández Rojas <noltari@gmail.com>

Signed-off-by: NÁlvaro Fernández Rojas <noltari@gmail.com>

BCM6348 IUDMA controller is present on multiple BMIPS (BCM63xx) SoCs.
Signed-off-by: NÁlvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: NDaniel Schwierzeck <daniel.schwierzeck@gmail.com>

Signed-off-by: NTom Rini <trini@konsulko.com>

Android code base is growing, so since Android "Pie" the size of
system.img grew up to be about 740 MiB. Let's increase system.img to
1 GiB to accommodate for those changes and leave some margin for future
changes. We don't want to make it more than 1 GiB, because we should
keep userdata partition big enough (for user files, like media etc.),
and eMMC size on BeagleBoard-X15 is only 3.5 GiB.
Signed-off-by: NSam Protsenko <semen.protsenko@linaro.org>
Acked-by: NPraneeth Bajjuri <praneeth@ti.com>

Output the device model migration warnings to stderr. This allows tools
like buildman to pick them up rather than suppressing them along with
the normal build output on stdout.
Signed-off-by: NChris Packham <judge.packham@gmail.com>

Commit a2b96ece breaks the enumeration
of the Image Types. New image types can be appended, but they cannot be
inserted in the list else backward compatibility is broken.

This restores the images types as before 2018.11 and move i.MX8 related
images at the end.
Signed-off-by: NRobert Berger <robert.berger@ReliableEmbeddedSystems.com>
Signed-off-by: NStefano Babic <sbabic@denx.de>
CC: Tom Rini <trini@konsulko.com>

Improvements and fixes or u-boot-rockchip:
- new board: adds rv1108-elgin-r1 board support
- rk3288-evb: dts: remove 'vmmc' from emmc node
- rk3399-puma: dts: remove obsolete DTS node 'vcc5v0_host'

Add the initial support for Elgin R1 board, which is based on the
RV1108 SoC and has the following features currently supported in
U-Boot:

- UART
- eMMC
- USB
Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>
Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>

- Second half of the USB Gadget DM conversion

- Introduce tools-only build for host tools
- Bugfixes to poplar, syscon and the hashtable, a tee return code
- Fix a warning on gcc-8 by reworking part of mtk_image to be not unsafe
  wrt strings.
- serial_stm32 reset support

This is a sync with kernel mainline dts.

The U-Boot eMMC does not need to care about the power for Rockchip
SoCs, because if the board is using eMMC, the power will default on
(for bootrom), so the 'vmmc', 'vqmmc' is only useful for SD in U-Boot.
Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>

vcc5v0_host and usbhub_enable share gpio4 RK_PA3,
which is a problem during probing (the second probe
will trigger a -EBUSY, when trying to get the gpio handle).

An analysis of the situation shows, that both regulators
are actually describing the same supply.

This patch removes the (currenlty not successful probing)
regulator vcc5v0_host from the DTS and adds the pinctrl-*
setting to usbhub_enable.
Signed-off-by: NChristoph Muellner <christoph.muellner@theobroma-systems.com>
Reviewed-by: NPhiilipp Tomsich <philipp.tomsich@theobroma-systems.com>

+ Update the function syscon_node_to_regmap() to force bound on
  syscon uclass and directly use the list of device from DM.
+ Remove the static list syscon_list.

This patch avoid issue (crash) when syscon_node_to_regmap() is called
before and after reallocation (list content is invalid).
Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>

Starting from version 8 the GCC, i.e. C compiler, starts complaining about
possible '\0' terminator loss or, as in this case, garbage copy.

In function ‘mtk_image_set_gen_header’,
    inlined from ‘mtk_image_set_header’ at tools/mtk_image.c:733:3:
tools/mtk_image.c:659:2: warning: ‘strncpy’ specified bound 12 equals destination size [-Wstringop-truncation]
  strncpy(hdr->boot.name, bootname, sizeof(hdr->boot.name));
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function ‘mtk_brom_parse_imagename’,
    inlined from ‘mtk_image_check_params’ at tools/mtk_image.c:388:9:
tools/mtk_image.c:325:5: warning: ‘strncpy’ specified bound 32 equals destination size [-Wstringop-truncation]
     strncpy(lk_name, val, sizeof(lk_name));
     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Replace it with snprintf() to tell compiler how much room we have in the
destination buffer for source string.

Fixes: 3b975a14 ("tools: MediaTek: add MTK boot header generation to mkimage")
Cc: Ryder Lee <ryder.lee@mediatek.com>
Cc: Weijie Gao <weijie.gao@mediatek.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: NWeijie Gao <weijie.gao@mediatek.com>

In some cases, UART is configured by early boot stage.
To be sure of the initial state of UART and to avoid
spurious chars on console, reset the serial block before
configuring it.
Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Commit 46879196 ("serial: Remove DM_FLAG_PRE_RELOC flag in various
drivers") essentially drops flag DM_FLAG_PRE_RELOC from serial_pl01x
driver for Poplar platform, because the platform falls into the
following strategy category made by the commit.

  Surround DM_FLAG_PRE_RELOC flag with OF_CONTROL check, for
  drivers that support both statically declared devices and
  configuration from device tree

Before the commit lands, Poplar platform works by statically declaring
pl011 serial device via U_BOOT_DEVICE() with DM_FLAG_PRE_RELOC flag set
in the driver.  But since Poplar also supports device configuration from
device tree, the commit practically drops the flag for Poplar, and hence
breaks the platform from booting.

This patch changes platform code and device tree to initiate pl011
serial device from device tree rather than static declaration, so that
above strategy about DM_FLAG_PRE_RELOC applies to Poplar, and therefore
the reported boot failure gets fixed.
Reported-by: NIgor Opaniuk <igor.opaniuk@linaro.org>
Fixes: 46879196 ("serial: Remove DM_FLAG_PRE_RELOC flag in various drivers")
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Reviewed-by: NIgor Opaniuk <igor.opaniuk@linaro.org>
Tested-by: NIgor Opaniuk <igor.opaniuk@linaro.org>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>

Add myself as co-maintainer for poplar board, as I'm actively working
on the board.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

The motivation for this is to allow distributions to distribute all
possible tools in a generic way, avoiding the need of specific tools
building for each machine.

Especially on OpenEmbedded / Yocto Project ecosystem, it is very
common each BSP to end providing their specific tools when they need
to generate images for some SoC (e.g MX23 / MX28 in meta-freescale
case).

Using this, we can package the tools doing:

$: make tools-only_defconfig
$: make tools-only
Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>
[trini: Add MAINTAINERS entry for myself, add to .travis.yml, make
U-Boot itself buildable to not trip up other frameworks]
Signed-off-by: NTom Rini <trini@konsulko.com>

The contents of the test subdirectories only make sense when we have
CONFIG_UNIT_TEST set.  We will otherwise attempt to build code on for
example sandbox that needs CONFIG_UNIT_TEST otherwise and rather than
complicate the Makefiles simply leave them out when we can.
Signed-off-by: NTom Rini <trini@konsulko.com>

The "dm" command under CONFIG_CMD_DM should live under cmd/ rather than
test/dm/ so move it.
Signed-off-by: NTom Rini <trini@konsulko.com>

The commit below incorrectly fixed hexport_r();
 >	size = totlen + 1;
One extra byte is necessary to NULL-terminate a whole buffer, "resp."

Fixes: f1b20acb ("hashtable: Fix length calculation in hexport_r")
Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org>

If OP-TEE core is compiled with support of REE FS and RPMB
at the same time (CFG_RPMB_FS ?= y; CFG_RPMB_FS ?= y), and persistent
storage API is used with TEE_STORAGE_PRIVATE storage id, it will
lead to TA panic.

E/TC:? 0 TA panicked with code 0xffff0009
.....
E/TC:? 0 Call stack:
E/TC:? 0  0x000000004002f2f8 TEE_OpenPersistentObject at
lib/libutee/tee_api_objects.c:422

In this particular case TEE_ERROR_STORAGE_NOT_AVAILABLE is more suitable
than TEE_ERROR_NOT_IMPLEMENTED, as it provides to a TA a possibility
to handle this error code [1].

>From GPD TEE Internal Core specification [2]:
TEE_ERROR_STORAGE_NOT_AVAILABLE - if the persistent object is stored in a
storage area which is currently inaccessible. It may be associated with
the device but unplugged, busy, or inaccessible for some other reason.

[1]: https://github.com/OP-TEE/optee_os/blob/94db01ef448d1e552161c2d861d57a5f8bda0cc0/lib/libutee/tee_api_objects.c#L419
[2]: https://globalplatform.org/wp-content/uploads/2018/06/GPD_TEE_Internal_Core_API_Specification_v1.1.2.50_PublicReview.pdfSigned-off-by: NIgor Opaniuk <igor.opaniuk@linaro.org>
Reviewed-by: NJens Wiklander <jens.wiklander@linaro.org>

Complete conversion of sound to driver model

When the device is in peripheral mode there is no
struct usb_bus_priv allocated pointer, as the uclass driver
("usb_dev_generic") doesn't call per_device_auto_alloc_size.

This results in writing to the internal SDRAM at
	priv->desc_before_addr = true;
Signed-off-by: NStefan Mavrodiev <stefan@olimex.com>

For USB3.0, the max packetsize for GET_DESCRIPTOR should be
sent as exponent value for 2. This means for 512, max packet
size should be filled with 9(2^9=512). Also, fill the USB
version field with 3.0 if speed is negotiated to Superspeed.
This fixes the issue of DFU gadget download failure with
superspeed. Without this patch, the max packet size is
overflowed to zero as the bMaxPacketsize is of u8 and hence
host is not able to detect this device.
Signed-off-by: NSiva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>

Enable DM_USB and DM_USB_GADGET for this platform. Also enable RNDIS boot
support (SPL load u-boot over USB RNDIS).
This is an example of how to use DM_USB on a am335x-based board.
A subsequent series will take this a step further and modify more
defconfigs.
Signed-off-by: NJean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: NTom Rini <trini@konsulko.com>

DM_USB is now supported in the SPL. Do not undef it
Besides to support DM_USB in SPL, one now has to use SPL_DM_USB
Signed-off-by: NJean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: NTom Rini <trini@konsulko.com>

When DM_USB is used, either the USB controllers are bound when the DTB
is parsed (when OF_CONTROL is enabled) or they are bound using the
U_BOOT_DEVICES() macro.
In the later case, the platform data is passed in a struct ti_musb_platdata
because it cannot be read from the DTB.
Signed-off-by: NJean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: NTom Rini <trini@konsulko.com>

Enable DM for USB peripheral in the musb-new driver.
Also make sure that the driver can be used in the SPL.
This implies that:
* the driver must work with and without the OF_CONTROL option. That
in turn, implies that the platform data can be passed in a struct
ti_musb_platdata or be read from the dtb
* usb.o is linked in the SPL if host support is enabled

Another change is that the driver does not fail to bind (and stop the boot
process) if one of the child driver does not bind. Reporting the error is
enough. This kind of error would appear if the port is configured in the
DTS but the driver is not activated in the config.
Signed-off-by: NJean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: NTom Rini <trini@konsulko.com>

The set_phy_power() callback is part of struct omap_musb_board_data. This
structure is part of the platform data passed to the musb-new driver. This
does not really fit with the Driver Model, so allow not to use struct
omap_musb_board_data to turn the phy on or off.
Signed-off-by: NJean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: NTom Rini <trini@konsulko.com>

The AM43xx SOCs have the ability to download the SPl through USB (RNDIS).
Adding support for RNDIS in SPL allows to also download u-boot through USB.
Signed-off-by: NJean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: NTom Rini <trini@konsulko.com>

Enable DM_USB and DM_USB_GADGET for AM43xx EVM boards.
Signed-off-by: NJean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: NTom Rini <trini@konsulko.com>