- fix complation error for CONFIG_USB
- update RPi3 DTBs to v5.1-rc6 state
- add defconfig for RPi3 B+
- Fix BCM2835_MBOX_TAG_TEST_PIXEL_ORDER define

Add missing mailing-list to the amlogic boards MAINTAINERS file.
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>

Fixes for 2019.07
-----------------
- Wandboard

After the conversion to DM the U-Boot proper binary name
is 'u-boot-dtb.img', so adjust it accordingly.
Signed-off-by: NFabio Estevam <festevam@gmail.com>

After the transition to DM, only the mx6dl/solo wandboard
is supported.

Add FIT image support so that all the wandboard variants
can be supported, like it was prior to the DM conversion.

Successfully booted Linux on mx6q/solo/qp wandboards.
Signed-off-by: NFabio Estevam <festevam@gmail.com>

Add a mmc0 alias so that U-Boot proper can associate mmc0
with the boot SD card.
Signed-off-by: NFabio Estevam <festevam@gmail.com>

Import wandboard devicetree files so that the mx6q and mx6qp
variants can be properly supported.
Signed-off-by: NFabio Estevam <festevam@gmail.com>

Udate the wandboard devicetree files with the ones
from kernel 5.1.9.
Signed-off-by: NFabio Estevam <festevam@gmail.com>

Place dtbs under SoC level rather than board level.

imx6q-novena.dtb and imx6dl-wandboard-revb1.dtb were
placed under the board config option, so move them
to SoC level.

This also aligns with the kernel dts Makefile format.
Signed-off-by: NFabio Estevam <festevam@gmail.com>

Keep dtb entries sorted to help adding new dtbs
in an organized form.
Signed-off-by: NFabio Estevam <festevam@gmail.com>

- fix for atf bl31_image_info pointer
- fix for rockpro64 vdd_log init
- fix for tinker-rk3288 SPL size too big

All the config for TPL has been update, we can enable the TPL.
Signed-off-by: NKever Yang <kever.yang@rock-chips.com>

The raw u-boot.bin for tinker board has been about 450KB without
debug option, and 550KB with all debug on, and the default value is 200KB,
which is not enough for run raw u-boot.bin.
Signed-off-by: NKever Yang <kever.yang@rock-chips.com>

We need to update TEXT BASE for TPL/SPL/U-Boot;
SPL no need relocate STACK after enable TPL, so remove it;
Don't enable pinctrl names so that SPL can get pinctrl dts;
Signed-off-by: NKever Yang <kever.yang@rock-chips.com>

rockchip pinctrl driver has update to use dts, so we need
to add the pinctrl config in SPL for sdmmc.
Signed-off-by: NKever Yang <kever.yang@rock-chips.com>

Migrate all the "u-boot,dm-pre-reloc" tag from rk3288-tinker.dts
into rk3288-tinker-u-boot.dtsi.
When both board level and soc level '-u-boot.dtsi' files exist,
we need to include the soc level 'rk3288-u-boot.dtsi' manually.
Signed-off-by: NKever Yang <kever.yang@rock-chips.com>

Move all the tag "u-boot,dm-pre-reloc" from rk3288.dtsi
into rk3288-u-boot.dtsi.
Signed-off-by: NKever Yang <kever.yang@rock-chips.com>

TPL is at SRAM while other stage is at SDRAM, so it needs
separate STACK.
Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
Reviewed-by: NJagan Teki <jagan@amarulasolutions.com>

More boards other than vyasa needs TPL, so enable the TPL configs
at chip level instead of board level.
Signed-off-by: NKever Yang <kever.yang@rock-chips.com>

Add missing regulator-init-microvolt property to vdd_log regulator.
Signed-off-by: NMark Kettenis <kettenis@openbsd.org>
Reviewed-by: NKever Yang <kever.yang@rock-chips.com>
(Rebase on latest u-boot-rockchip master)
Signed-off-by: NKever Yang <kever.yang@rock-chips.com>

Change-Id: I13b24fb81e8ad269d7dbb0c7b67f5f4795d2e775

The pointer to struct atf_image_info in
bl31_params_mem.bl31_params.bl31_image_info is not initialized before
being dereferenced. This can cause U-Boot to crash right before jumping
to the BL31 ATF binary.
Signed-off-by: NFrieder Schrempf <frieder.schrempf@kontron.de>
Fixes: bcc1726a ("spl: add support to booting with ATF")
Reviewed-by: NKever Yang <kever.yang@rock-chips.com>

There is a regression seen on Poplar platform, which doesn't even show
a U-Boot version banner on booting.  It turns out that due to landing
of commit 3a7c45f6 ("simple-bus: add DM_FLAG_PRE_RELOC flag to
simple-bus driver"), we need to increase SYS_MALLOC_F_LEN from its
default size 0x400, as pre-relocation requires more memory there.  Let's
increase SYS_MALLOC_F_LEN to 0x4000 to fix the regression.

Thanks to Andreas Färber <afaerber@suse.de> for reporting, and Bin Meng
<bmeng.cn@gmail.com> for trouble shooting.
Reported-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
Tested-by: NAndreas Färber <afaerber@suse.de>

Second set of u-boot-atmel fixes for 2019.07 cycle

UniPhier SoC updates for v2019.07

- Add SPI pin-mux data for pinctrl driver

- Remove unused code

- Trivial bug-fix and clean-up

Pull request for UEFI sub-system for v2019.07-rc5 (4)

The definition of an unimplemented function is corrected.

Move the sg_set_pinsel macro to arch/arm/mach-uniphier/arm32/debug_ll.S
since it is not used anywhere else.

Move the C functions sg_set_{pinsel,iectrl} to debug-uart.c since they
are not used anywhere else.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

debug_uart_init() is called from spl_board_init(), which is only
compiled for SPL. For U-boot proper, _debug_uart_init() is unreachable,
so dropped by the dead code elimination.

Now that 64-bit SoCs of this SoC family no longer support SPL,
debug-uart-ld20.c is never compiled.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

This file calls readl(), so needs to include <linux/io.h>.
Currently, it relies on someone else including it.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

Commit e27d6c7d ("ARM: uniphier: simplify SoC ID get function")
accidentally removed the macros needed to compile debug_ll.S

Revive them.

Fixes: e27d6c7d ("ARM: uniphier: simplify SoC ID get function")
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

Add pin-mux settings for SPI controller.
Signed-off-by: NKunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

ConvertPointer() must be EFIAPI. The first parameter should be of type
efi_uint_t. Use the same parameter name as the UEFI specification.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

Fixes for 2019.07

- menlo board
- allow SDB on Sabre
- HAB for mx6sl
- apalis board

STM32 MCU fixes/cleanup:
- Fix SPL console for STM32F769 Discovery
- Fix Memory Protection Unit size for STM32F4 series
- Cleanup DT for STM32F746 Discovery

The MPU region dedicated for SDRAM for STM32F4 SoCs family
was set to 16MB, but STM32F429 Evaluation board have 32MB of SDRAM.

When kernel starts, only first 16MB of SDRAM are configured with XN
(eXecute Never) bit disabled, whereas kernel is using 32MB.
To avoid such situation in the future, extend this MPU region to 512MB
as for STM32F7/H7.

It fixes the following user land exception on STM32F429 Evaluation
board :

[    1.713002] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[    1.722605] devtmpfs: mounted
[    1.733057] Freeing unused kernel memory: 72K
[    1.737622] This architecture does not have kernel memory protection.
[    1.744070] Run /sbin/init as init process
[    1.906850]
[    1.906850] Unhandled exception: IPSR = 00000004 LR = fffffffd
[    1.914282] CPU: 0 PID: 1 Comm: init Not tainted 5.1.0-00002-gcf9ca5719954 #6
[    1.921433] Hardware name: STM32 (Device Tree Support)
[    1.926601] PC is at 0x1a00b64
[    1.929642] LR is at   (null)
[    1.932669] pc : [<01a00b64>]    lr : [<00000000>]    psr: 01000000
[    1.938993] sp : 01a5cfb0  ip : 00000000  fp : 00000000
[    1.944269] r10: 01a43b00  r9 : 00000000  r8 : 00000000
[    1.949564] r7 : 00000000  r6 : 00000000  r5 : 00000000  r4 : 00000000
[    1.956168] r3 : 00000000  r2 : 00000000  r1 : 00000000  r0 : 00000000
[    1.962701] xPSR: 01000000
[    1.965506] CPU: 0 PID: 1 Comm: init Not tainted 5.1.0-00002-gcf9ca5719954 #6
[    1.972658] Hardware name: STM32 (Device Tree Support)
[    1.978132] [<0000c009>] (unwind_backtrace) from [<0000b24f>] (show_stack+0xb/0xc)
[    1.986024] [<0000b24f>] (show_stack) from [<0000b947>] (__invalid_entry+0x4b/0x4c)
Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>

As in stm32f7-u-boot.dtsi these nodes already have "u-bootdm-pre-reloc"
property, no need to add them again in stm32f746-disco-u-boot.dtsi.
Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>

This allow to get console output in SPL for stm32f769-disco.
Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>

Default value (4000ms) of PHY_ANEG_TIMEOUT for Micrel KSZ9031 contoller
isn't sufficient to finish auto-negotiation, which sometimes leads to
timeout errors:

Apalis iMX6 # dhcp
FEC Waiting for PHY auto negotiation to complete......... TIMEOUT !

Increase the auto-negotiation time-out to 15000ms.
Signed-off-by: NIgor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: NPhilippe Schenker <philippe.schenker@toradex.com>

Enable DM Video support on iMX53 M53Menlo and fix minor details
to restore previous behavior of the system.
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>