- 21 11月, 2018 13 次提交
-
-
由 Liviu Dudau 提交于
With drivers that have prefix names that are quite long (like 'versatile_') it is useful to have a wider column for the driver's name when dumping the device driver tree. Also update the tests to take into account the wider output format. Signed-off-by: NLiviu Dudau <liviu.dudau@foss.arm.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Heinrich Schuchardt 提交于
If we want to control which network interface is actually used, we have to issue 'setenv ethrotate no'. If ethrotate is not set any interface may be used. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Heinrich Schuchardt 提交于
The command to set environment variables is setenv. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Heinrich Schuchardt 提交于
DEBUG should not be defined in production code. Change printf() to debug() where this writes a debug message. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: NAlexander Graf <agraf@suse.de> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Hou Zhiqiang 提交于
As the PCIe specification recommend reading the Vendor ID register to determine if a Function is present, read the Vendor ID of a non-existent Function must not result in system error, so we'd better make the first CFG read to Vendor ID instead of Header Type register in the PCIe enumeration. Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
git://git.denx.de/u-boot-marvell由 Tom Rini 提交于
- Clearfog GT-8K support added by Baruch / Raheeb - const and sizes cleanup (also in MIPS) from Baruch - Minor cleanup to db-88f6820 from Chris
-
由 Tom Rini 提交于
- adc enhancements - FAT fix
-
由 Thomas RIENOESSL 提交于
This fixes problems accessing drives formated under Windows as FAT16. Signed-off-by: NThomas RIENOESSL <thomas.rienoessl@bachmann.info> [trini: Rebase on top of f528c140] Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Jerome Brunet 提交于
clk81 divider is 0 based (meaning that 0 value in the register means divide by 1). Fix clk81 rate calculation for this. Signed-off-by: NJerome Brunet <jbrunet@baylibre.com> Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
-
由 Fabrice Gasnier 提交于
Add new option to 'adc' command to do a single scan of: - some channel(s), using mask argument - all channels available on an ADC device (when optional mask is omitted). Signed-off-by: NFabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Fabrice Gasnier 提交于
Use newly introduced adc_raw_to_uV() API to print conversion result both as raw value and micro-volts by default. Signed-off-by: NFabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Fabrice Gasnier 提交于
Enhance adc info command to report also the channel mask. Signed-off-by: NFabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Fabrice Gasnier 提交于
Add two functions to ADC uclass's: - adc_raw_to_uV() to ease ADC raw value conversion to microvolts - adc_channel_mask() to get channels on consumer side Signed-off-by: NFabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
- 20 11月, 2018 7 次提交
-
-
由 Rabeeh Khoury 提交于
The SolidRun Clearfog GT-8K is based on Armada 8040. https://wiki.solid-run.com/doku.php?id=products:a8040:clearfoggt8k The config file is identical to the Macchiatobin one (mvebu_mcbin-88f8040_defconfig) with only the default device-tree changed. Signed-off-by: NRabeeh Khoury <rabeeh@solid-run.com> Signed-off-by: NBaruch Siach <baruch@tkos.co.il> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Chris Packham 提交于
After migration to Kconfig the comment about TEXT_BASE has become redundant. Signed-off-by: NChris Packham <judge.packham@gmail.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Baruch Siach 提交于
Some Armada 8K boards like Macchiatobin and Clearfog GT-8K use RAM from external DIMM. Hard coding the RAM size in the device-tree is not convenient. Fortunately, the ATF that initializes the RAM knows the size of RAM, and U-Boot can query the ATF using a SMC call. The ATF maps the lower 3G of RAM starting at address 0. Higher RAM is mapped at 4G. This leaves a 1G hole between 3G and 4G for IO peripherals. Use a second bi_dram[] entry to describe the higher RAM area. As a result, CONFIG_NR_DRAM_BANKS must be set to 2 to use more than 3GB RAM. This code in this commit is mostly taken from downstream Marvell U-Boot code by Grzegorz Jaszczyk. Cc: Grzegorz Jaszczyk <jaz@semihalf.com> Signed-off-by: NBaruch Siach <baruch@tkos.co.il> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Baruch Siach 提交于
The kernel added SZ_4G macro in commit f2b9ba871b (arm64/kernel: kaslr: reduce module randomization range to 4 GB). Include linux/const.h for the _AC macro. Drop a local SZ_4G definition in tegra code. Cc: Tom Warren <twarren@nvidia.com> Reviewed-by: NTom Rini <trini@konsulko.com> Signed-off-by: NBaruch Siach <baruch@tkos.co.il> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Baruch Siach 提交于
Commit 86f21c96 (mips: Use common _AC macro now.) removed the _AC definition from const.h. All other macros defined in const.h are not used anywhere, and there is now no user of this header. Remove this header. Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: NBaruch Siach <baruch@tkos.co.il> Reviewed-by: NTom Rini <trini@konsulko.com> Reviewed-by: NDaniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Baruch Siach 提交于
Drop the _AC and UL macros from common.h. Linux headers is the original source of this macro, so keep its definition in the same header. Update existing users of these macros to include const.h directly. Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Rick Chen <rick@andestech.com> Reviewed-by: NTom Rini <trini@konsulko.com> Reviewed-by: NRick Chen <rick@andestech.com> Signed-off-by: NBaruch Siach <baruch@tkos.co.il> Reviewed-by: NDaniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Baruch Siach 提交于
Combine the uapi/linux/const.h header into the kernel linux/const.h. The next commit will use the _AC macro this header instead of the common.h definition. Based on Linux kernel version 4.19. Signed-off-by: NBaruch Siach <baruch@tkos.co.il> Reviewed-by: NTom Rini <trini@konsulko.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
- 19 11月, 2018 1 次提交
-
-
git://git.denx.de/u-boot-mips由 Tom Rini 提交于
- tree-wide: introduce LDFLAGS_STANDALONE - MIPS: fix long-standing issue with linking of standalone programs - MIPS: MT76xx: add GPIO and WDT drivers - MIPS: MT76xx: various fixes and updates to gardena-smart-gateway board - MIPS: MT76xx: various fixes and updates to linkit-smart-7688 board
-
- 18 11月, 2018 17 次提交
-
-
由 Daniel Schwierzeck 提交于
Use the global MIPS specific u-boot.lds for linking standalone programs instead of the outdated ones in examples/standalone/. Also pass --gc-sections in LDFLAGS_STANDALONE to optimize the size of standalone programs. Finally remove the deprecated config.mk files in arch/mips/cpu/mips[32,64]/. Signed-off-by: NDaniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
由 Daniel Schwierzeck 提交于
Currently the OBJCOPYFLAGS are cleared when assigning "-O srec" or "-O binary" for standalone programs. All flags set by arch-specific Makefiles are lost. This is bad if an arch demands arch-specific flags for the objcopy step. Signed-off-by: NDaniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Daniel Schwierzeck 提交于
Introduce a new Makefile variable for passing LDFLAGS to standalone programs. Currently the variable CONFIG_STANDALONE_LOAD_ADDR is misued on some archs to pass a specific linker script. Signed-off-by: NDaniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: NTom Rini <trini@konsulko.com> Reviewed-by: NRick Chen <rick@andestech.com>
-
由 Stefan Roese 提交于
These misc updates include the following changes: - Change baudrate from 57600 to 115200 - Enable MIPS_BOOT_CMDLINE_LEGACY - Enable FIT support - Enable ethernet support - Enable SPI support - Enable GPIO support - Change max image size from 0x40000 to 0x80000 A note about the baudrate change: The original Mediatek U-Boot version used 57600 baud. Lets move to a more common and faster speed of 115200 baud. And remove the "console=" property from the DT as its not needed. Signed-off-by: NStefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
由 Stefan Roese 提交于
Use the correct function to get the uncached address to access the SoC registers. Signed-off-by: NStefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
由 Stefan Roese 提交于
These misc updates include the following changes: - Change baudrate from 57600 to 115200 - Enable MIPS_BOOT_CMDLINE_LEGACY - Enable FIT support - Enable ethernet support - Enable SPI NOR and NAND support - Change MTD_UBI_BEB_LIMIT to 22 - Enable MTD Support - Enable GPIO support - Enable watchdog support - Enable bootcounter support - Enable version variable - Change max image size from 0x80000 to 0xa0000 - Change SYS_MALLOC_LEN to 16MiB (because of UBI/UBIFS) Signed-off-by: NStefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
由 Stefan Roese 提交于
This is needed to set the LEDs automatically to a default state, as configured in the dts. Signed-off-by: NStefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
由 Stefan Roese 提交于
Add the available LEDs to the DTS file so that they can be used. Signed-off-by: NStefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
由 Stefan Roese 提交于
Configure digital vs analog GPIOs as needed on this board. Signed-off-by: NStefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
由 Stefan Roese 提交于
This patch enables and starts the watchdog on the MT7620 platform. Currently the WD timeout is configured to 60 seconds. Signed-off-by: NStefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> [fixed build error due to missing function prototype arch_misc_init] Signed-off-by: NDaniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
由 Stefan Roese 提交于
Imply DM_ETH and DM_GPIO for ARCH_MT7620, as this platform now supports ethernet and GPIO as well. Signed-off-by: NStefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
由 Stefan Roese 提交于
Add the watchdog DT node to the DTS file. Signed-off-by: NStefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
由 Stefan Roese 提交于
Add the GPIO DT nodes to the DTS file. Signed-off-by: NStefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
由 Stefan Roese 提交于
Add the ethernet DT node to the DTS file. Signed-off-by: NStefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
由 Stefan Roese 提交于
This fixes an issue which has been noticed on the Gardena board, with the watchdog enabled, where the watdchdog reset (after a system hang) did result in reporting of 2.9 GiB and a hang after this. With this patch applied the memory controller is correctly reset and initialized again even after a watchdog reset. Signed-off-by: NStefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
由 Stefan Roese 提交于
This patch adds GPIO support for the Mediatek MT7621 SoC, tested on MT7688 (Gardena smart-gateway). The driver is loosly based on the Linux kernel version. Signed-off-by: NStefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: NDaniel Schwierzeck <daniel.schwierzeck@gmail.com> [fixed checkpatch.pl warnings: Prefer 'unsigned int' to bare use of 'unsigned'] Signed-off-by: NDaniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
由 Stefan Roese 提交于
This patch adds watchdog support for the Mediatek MT7621 SoC. The driver is loosly based on the Linux kernel version. Signed-off-by: NStefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: NDaniel Schwierzeck <daniel.schwierzeck@gmail.com> [fixed merge conflict in drivers/watchdog/Kconfig] Signed-off-by: NDaniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
- 17 11月, 2018 2 次提交
-
-
由 Tom Rini 提交于
- Initial bcm968580xref, am65x_evm_r5 support - lpc32xx, omap3_logic/am3517_evm updates - pinctrl command - fs_loader available for SPL
-
由 Tom Rini 提交于
Add entries for the pine64-lts and pinebook configs. Cc: Vasily Khoruzhick <anarsoul@gmail.com> Cc: Andre Przywara <andre.przywara@arm.com> Signed-off-by: NTom Rini <trini@konsulko.com>
-