- 13 12月, 2011 1 次提交
-
-
由 Jerry Huang 提交于
In the current u-boot code, the value of these fields are the reserved value (0b100), through the signal integrity measurement on freescale's board with these reserved setting, the signal eye is out of the recommended spec for non-transition amplitude at 500mV nominal. According to the errata for MPC8379E, we should make a change to the recommended setting from essentially nothing at this time to 0b001 for SATA. Signed-off-by: NJerry Huang <Chang-Ming.Huang@freescale.com> Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
-
- 12 12月, 2011 15 次提交
-
-
git://git.denx.de/u-boot-staging由 Wolfgang Denk 提交于
* 'agust@denx.de' of git://git.denx.de/u-boot-staging: pm9g45: init serial console before relocation pm9261: init serial console before relocation pm9263: init serial console before relocation
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
The "tb0229" board has long been unmaintained, and is broken. Remove it. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
Fix: omap2420h4.c: In function 'dram_init': omap2420h4.c:196:25: warning: variable 'cpu' set but not used [-Wunused-but-set-variable] Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Richard Woodruff <r-woodruff2@ti.com> Cc: Tom Rini <trini@ti.com>
-
由 Anatolij Gustschin 提交于
Fix: reiserfs.c: In function 'reiserfs_mount': reiserfs.c:360:22: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
由 David Müller (ELSOFT AG) 提交于
Fix: ../common/isa.c: In function 'handle_isa_int': ../common/isa.c:385:21: warning: variable 'isr2' set but not used [-Wunused-but-set-variable] ../common/isa.c:385:16: warning: variable 'isr1' set but not used [-Wunused-but-set-variable] Signed-off-by: NDavid Mueller <d.mueller@elsoft.ch>
-
由 Asen Dimov 提交于
The early messages can be seen on the debug console. Signed-off-by: NAsen Chavdarov Dimov <dimov@ronetix.at>
-
由 Asen Dimov 提交于
The early messages can be seen on the debug console. Signed-off-by: NAsen Chavdarov Dimov <dimov@ronetix.at>
-
由 Asen Dimov 提交于
The early messages can be seen on the debug console. Signed-off-by: NAsen Chavdarov Dimov <dimov@ronetix.at>
-
由 Horst Kronstorfer 提交于
Signed-off-by: NHorst Kronstorfer <hkronsto@frequentis.com>
-
由 Daniel Schwierzeck 提交于
This board breaks MAKEALL -a mips due to compile errors. This patch fixes only the parts causing the errors to get MAKEALL working. Signed-off-by: NDaniel Schwierzeck <daniel.schwierzeck@googlemail.com>
-
由 Kumar Gala 提交于
We already flush the kernel image after we've loaded it to ensure visiblity to the other cores. We need to do the same thing for the ramdisk and device tree images. In AMP boot scenarios we might not be HW cache coherent with the secondary core that we are loading and setting the ramdisk and device tree up for. Thus we need to ensure we've flushed the regions of memory utilized by ramdisk and device tree so the loadding and any modifications (from decompression or fdt updates) are made visible to the secondary cores. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Anatolij Gustschin 提交于
Switch to extension board detection using pci_find_device() instead of detecting by i2c access to EEPROM device on extension board. This is a cleaner detection method since EEPROM addresses can be different on different board revisions. This also avoids "i2c_read: failed to address chip" error messages in the boot log on boards without extension board which may confuse users. Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
git://git.denx.de/u-boot-usb由 Wolfgang Denk 提交于
* 'master' of git://git.denx.de/u-boot-usb: USB: efikamx: Enable USB on EfikaMX and EfikaSB USB: Add generic ULPI layer and a viewport USB: EHCI: Allow EHCI post-powerup configuration in board files USB: mx51evk: add end enable USB host support on port 1 USB: mx53loco: add end enable USB host support on port 1 USB: MX5: Add MX5 usb post-init callback USB: MX5: Abstract out mx51 USB pixmux configuration USB: MX5: add generic USB EHCI support for mx51 and mx53 USB: MX5: add helper functions to enable USB clocks usb:gadget:s5p Enable the USB Gadget framework at GONI usb:gadget:s5p USB Device Controller (UDC) implementation ehci: speed up initialization usb: add help for missing start subcommand cosmetic: remove excess whitespace from usb command help usb: align usb_endpoint_descriptor to 16-bit boundary usbtty: init endpoints prior to startup events pxa: convert pxa27x_udc to use read and write functions pxa: activate the first usb host port on pxa27x by default pxa: fix usb host register mismatch ehci-fsl: correct size of ehci caplength USB: Add usb_event_poll() to get keyboards working with EHCI USB: gadaget: add Marvell controller support USB: Fix complaints about strict aliasing in OHCI-HCD USB: Drop dead code from usb_kbd.c USB: Rework usb_kbd.c USB: Add functionality to poll the USB keyboard via control EP
-
git://git.denx.de/u-boot-arm由 Wolfgang Denk 提交于
* 'master' of git://git.denx.de/u-boot-arm: arm: add __aeabi_unwind_cpp_pr1() function to avoid linker complaints post: fix compile issue for post tests on kirkwood
-
- 11 12月, 2011 24 次提交
-
-
由 Marek Vasut 提交于
Signed-off-by: NMarek Vasut <marek.vasut@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Remy Bohmer <linux@bohmer.net> Cc: Wolfgang Grandegger <wg@denx.de> Cc: Jason Liu <r64343@freescale.com>
-
由 Jana Rapava 提交于
Add partial ULPI specification implementation that should be enough to interface the ULPI PHYs in the boot loader context. Add a viewport implementation for Chipidea/ARC based controllers. Signed-off-by: NJana Rapava <fermata7@gmail.com> Signed-off-by: NIgor Grinberg <grinberg@compulab.co.il> Cc: Remy Bohmer <linux@bohmer.net> Cc: Stefano Babic <sbabic@denx.de> Cc: Wolfgang Grandegger <wg@denx.de> Cc: Simon Glass <sjg@chromium.org>
-
由 Marek Vasut 提交于
This patch allows USB to work on some hosts, which need additional frobing after the host was powered up via regular USB powerup sequence. Signed-off-by: NMarek Vasut <marek.vasut@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Remy Bohmer <linux@bohmer.net> Cc: Wolfgang Grandegger <wg@denx.de> Cc: Jason Liu <r64343@freescale.com>
-
由 Wolfgang Grandegger 提交于
Signed-off-by: NWolfgang Grandegger <wg@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Remy Bohmer <linux@bohmer.net> Cc: Wolfgang Grandegger <wg@denx.de> Cc: Jason Liu <r64343@freescale.com>
-
由 Wolfgang Grandegger 提交于
Signed-off-by: NWolfgang Grandegger <wg@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Remy Bohmer <linux@bohmer.net> Cc: Wolfgang Grandegger <wg@denx.de> Cc: Jason Liu <r64343@freescale.com>
-
由 Marek Vasut 提交于
This is useful for USB Transceivers init etc. Signed-off-by: NMarek Vasut <marek.vasut@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Remy Bohmer <linux@bohmer.net> Cc: Wolfgang Grandegger <wg@denx.de> Cc: Jason Liu <r64343@freescale.com>
-
由 Marek Vasut 提交于
Signed-off-by: NMarek Vasut <marek.vasut@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Remy Bohmer <linux@bohmer.net> Cc: Wolfgang Grandegger <wg@denx.de> Cc: Jason Liu <r64343@freescale.com>
-
由 Wolfgang Grandegger 提交于
It's derived from ehci-mxc and uses the header files of the ehci-fsl interface. The callback board_ehci_hcd_init() has been introduced to allow for board-specific setup when USB is started. Signed-off-by: NWolfgang Grandegger <wg@denx.de> CC: Stefano Babic <sbabic@denx.de> CC: Remy Bohmer <linux@bohmer.net>
-
由 Wolfgang Grandegger 提交于
Signed-off-by: NWolfgang Grandegger <wg@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Remy Bohmer <linux@bohmer.net> Cc: Wolfgang Grandegger <wg@denx.de> Cc: Jason Liu <r64343@freescale.com> V2: Fix spacing in crm_regs.h
-
由 Lukasz Majewski 提交于
This commit enables support for USB Gadgets on the GONI reference target. Signed-off-by: NLukasz Majewski <l.majewski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Remy Bohmer <linux@bohmer.net>
-
由 Lukasz Majewski 提交于
This commit provides UDC driver support for Samsung's SoC family of processors. Signed-off-by: NLukasz Majewski <l.majewski@samsung.com> Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Remy Bohmer <linux@bohmer.net>
-
由 Vincent Palatin 提交于
According to EHCI specification v1.0, the controller should stabilize the power on a port at most 20 ms after the port power bit transition. So, we put this setting in the virtual descriptor corresponding field, (bPwrOn2PwrGood = 10 => 10 x 2ms = 20ms), this saves about 500ms at each controller initialization/enumeration. Signed-off-by: NVincent Palatin <vpalatin@chromium.org>
-
由 Veli-Pekka Peltola 提交于
Signed-off-by: NVeli-Pekka Peltola <veli-pekka.peltola@bluegiga.com> Cc: Remy Bohmer <linux@bohmer.net>
-
由 Veli-Pekka Peltola 提交于
Signed-off-by: NVeli-Pekka Peltola <veli-pekka.peltola@bluegiga.com> Cc: Remy Bohmer <linux@bohmer.net>
-
由 Stefan Kristiansson 提交于
The usb_endpoint_descriptor struct is 7 bytes large and is defined as an array (ep_desc[USB_MAXENDPOINTS]) in the usb_interface struct in include/usb.h This fact will result in that every odd index in that array will start at an uneven address, this in turn makes accesses to u16 wMaxPacketSize unaligned. Such accesses are illegal on the OpenRISC architecture (as well as other architectures) and will render a bus error. Setting the aligned(2) attribute on usb_endpoint_descriptor will force wMaxPacketSize to a 16-bit boundary. Signed-off-by: NStefan Kristiansson <stefan.kristiansson@saunalahti.fi>
-
由 Stefan Herbrechtsmeier 提交于
On some usb device controllers (pxa) the endpoint configuration must be programmed prior to enable it. Signed-off-by: NStefan Herbrechtsmeier <sherbrec@cit-ec.uni-bielefeld.de> CC: Marek Vasut <marek.vasut@gmail.com> CC: Remy Bohmer <linux@bohmer.net>
-
由 Stefan Herbrechtsmeier 提交于
Signed-off-by: NStefan Herbrechtsmeier <sherbrec@cit-ec.uni-bielefeld.de> CC: Marek Vasut <marek.vasut@gmail.com> CC: Remy Bohmer <linux@bohmer.net>
-
由 Stefan Herbrechtsmeier 提交于
The pxa27x has 3 usb host ports. Activate all by default. Signed-off-by: NStefan Herbrechtsmeier <sherbrec@cit-ec.uni-bielefeld.de> CC: Marek Vasut <marek.vasut@gmail.com> CC: Remy Bohmer <linux@bohmer.net>
-
由 Stefan Herbrechtsmeier 提交于
Signed-off-by: NStefan Herbrechtsmeier <sherbrec@cit-ec.uni-bielefeld.de> CC: Marek Vasut <marek.vasut@gmail.com> CC: Remy Bohmer <linux@bohmer.net>
-
由 Wolfgang Grandegger 提交于
According to the EHCI specification the Capability Register Length has a size of 8 bits. Signed-off-by: NWolfgang Grandegger <wg@denx.de> Acked-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Marek Vasut 提交于
Signed-off-by: NMarek Vasut <marek.vasut@gmail.com> Cc: Remy Bohmer <linux@bohmer.net>
-
由 Lei Wen 提交于
Signed-off-by: NLei Wen <leiwen@marvell.com>
-
由 Marek Vasut 提交于
Signed-off-by: NMarek Vasut <marek.vasut@gmail.com>
-
由 Marek Vasut 提交于
Signed-off-by: NMarek Vasut <marek.vasut@gmail.com> Acked-by: NMike Frysinger <vapier@gentoo.org> Cc: Remy Bohmer <linux@bohmer.net> Cc: Wolfgang Denk <wd@denx.de>
-