- 23 7月, 2018 39 次提交
-
-
由 Otavio Salvador 提交于
This allow the addition of extra default configurations for each baseboard, removing the boot menu when user boots for the first time. Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>
-
由 Fabio Estevam 提交于
The addrmap5 value is the same for the 512MB and 1GB variants, so there is no need to override it. Signed-off-by: NFabio Estevam <festevam@gmail.com> Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>
-
由 Fabio Estevam 提交于
Currently the CAAM driver fails to be probed: caam 30900000.caam: Entropy delay = 3200 caam 30900000.caam: failed to acquire DECO 0 caam 30900000.caam: failed to instantiate RNG CAAM needs to be initialized in secure world, so enable CONFIG_ARMV7_BOOT_SEC_DEFAULT to allow the driver to probe successfully. Tested with kernel mainline version 4.17.2. Signed-off-by: NFabio Estevam <festevam@gmail.com> Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>
-
由 Fabio Estevam 提交于
Falcon mode boots the kernel directly from SPL, without loading the full U-Boot. As pico-imx7d does not have a GPIO for selecting Falcon versus normal mode, enter in Falcon mode when the customer selects the CONFIG_SPL_OS_BOOT option in menuconfig. Signed-off-by: NFabio Estevam <festevam@gmail.com> Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>
-
由 Otavio Salvador 提交于
Currently the baseboards do not offer a way to autodetect which one is in use, so we ask the user if no value has been set. Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>
-
由 Fabio Berton 提交于
Add spl entry on dfu_alt_info to be able to update U-Boot with SPL for pico imx7d board. Signed-off-by: NFabio Berton <fabio.berton@ossystems.com.br> Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>
-
由 Fabio Estevam 提交于
Convert pico-imx7d to SPL support. There are two variants of pico-imx7d SOMs: - One with 512MB of RAM - One with 1GB of RAM The 512MB module contains two Hynix H5TC2G63GFR-PBA. The 1GB module contains two Hynix H5TC4G63GFR-PBA. The RAM size is determined in runtime by reading GPIO1_12. While at it, also add USB Serial Download mode support as it is very helpful for loading SPL and u-boot.img via imx_usb_loader. Signed-off-by: NFabio Estevam <festevam@gmail.com> Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>
-
由 Fabio Estevam 提交于
fastboot tool is a convenient way to flash the eMMC, so add support for it. Examples of usages: On the pico-imx7d U-Boot prompt: => fastboot 0 On the Linux PC connected via USB: 1. Retrieving the U-Boot version $ sudo fastboot getvar bootloader-version -i 0x0525 bootloader-version: U-Boot 2018.07-rc1-03888-gde846f9 finished. total time: 0.000s 2. Resetting the board $ sudo fastboot reboot -i 0x0525 (this causes the pico-imx7d to reboot) Signed-off-by: NFabio Estevam <festevam@gmail.com> Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>
-
由 Otavio Salvador 提交于
Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>
-
由 Otavio Salvador 提交于
This allow the use of: > run setup_emmc inside of the U-Boot prompt to do the partitioning of the disk. Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>
-
由 Otavio Salvador 提交于
This sets DISTRO_CONFIG and BOOTCOMMAND, as well as add a `finduuid` environment helper to allow it to properly work with Yocto Project and other distributions using extlinux autogenerated configuration files. Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>
-
由 Fabio Estevam 提交于
Instead of keeping a custom environment, use a more generic approach by switching to disto config. Signed-off-by: NFabio Estevam <festevam@gmail.com> Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>
-
由 Mark Jonas 提交于
Not all i.MX6 pads use the same drive strength table. So far only the 240 Ohm to 34 Ohm table was available. Because the constants used have speaking names it can be confusing to use e.g. PAD_CTL_DSE_48ohm when according to the reference manual 52 Ohm is the correct value. This patch adds the 260 Ohm to 37 Ohm table. For example, the IOMUXC_SW_PAD_CTL_PAD_SD2_CLK register (SD-card clock) uses the added table. Signed-off-by: NMark Jonas <mark.jonas@de.bosch.com> Reviewed-by: NStefano Babic <sbabic@denx.de>
-
由 Stefan Agner 提交于
This makes sure that all Colibri iMX7 modules work with the same timing. The changes are: - Disable ODT on read (JEDEC standard JESD79-3F says in chapter 5.2.3 ODT during Reads: "As the DDR3 SDRAM can not terminate and drive at the same time, RTT must be disabled at least half a clock cycle..." and also MX7D SABRESD is disabling it) This alone fixed memory issues for two Colibri iMX7 1GB modules which showed issues before - Make sure tRFC(min) is at least 260ns - Make sure tRC is >50.625ns - tRP needs to be >13.125ns, we can lower from 18.75ns to 15ns - tFAW is not relevant, leave at reset Signed-off-by: NStefan Agner <stefan.agner@toradex.com> Acked-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com>
-
由 Stefan Agner 提交于
Device trees from vanilla Linux do not specify a i.MX 7 specific compatible string. Make sure to set partitions also when booting upstream Linux. Signed-off-by: NStefan Agner <stefan.agner@toradex.com>
-
由 Jon Nettleton 提交于
Previously we had stored the environment right after the u-boot.img on the disk. I never liked this because with dtbs being included and such the image could grow in size. Instead we move the environment to be negatively offset from the 1MB mark. Almost all our images start at 4MB's, and most standard images start at 1MB, and all our storage devices are a minimum 1MB. Therefore we can store env there for all classes of devices and have plenty of space in case u-boot.img needs to grow. Signed-off-by: NJon Nettleton <jon@solid-run.com> Signed-off-by: NBaruch Siach <baruch@tkos.co.il> Reviewed-by: NFabio Estevam <fabio.estevam@nxp.com>
-
由 Stefan Agner 提交于
Implement MIGRATE_INFO_TYPE. This informs Linux that no migration for the trusted operating system is necessary: [ 0.000000] psci: Trusted OS migration not required Signed-off-by: NStefan Agner <stefan.agner@toradex.com>
-
由 Stefan Agner 提交于
So far psci_cpu_(on|off) only worked for CPU1. Allow to control CPU0 too. This allows to run the Linux PSCI checker successfully: [ 2.213447] psci_checker: PSCI checker started using 2 CPUs [ 2.219107] psci_checker: Starting hotplug tests [ 2.223859] psci_checker: Trying to turn off and on again all CPUs [ 2.267191] IRQ21 no longer affine to CPU0 [ 2.293266] Retrying again to check for CPU kill [ 2.302269] CPU0 killed. [ 2.311648] psci_checker: Trying to turn off and on again group 0 (CPUs 0-1) [ 2.354354] IRQ21 no longer affine to CPU0 [ 2.383222] Retrying again to check for CPU kill [ 2.392148] CPU0 killed. [ 2.398063] psci_checker: Hotplug tests passed OK [ 2.402910] psci_checker: Starting suspend tests (10 cycles per state) [ 2.410019] psci_checker: cpuidle not available on CPU 0, ignoring [ 2.416452] psci_checker: cpuidle not available on CPU 1, ignoring [ 2.422757] psci_checker: Could not start suspend tests on any CPU [ 2.429370] psci_checker: PSCI checker completed Signed-off-by: NStefan Agner <stefan.agner@toradex.com>
-
由 Stefan Agner 提交于
PSCI 1.0 require PSCI_VERSION, PSCI_FEATURES, AFFINITY_INFO and CPU_SUSPEND to be implemented. Commit 0ec3d98f ("mx7_common: use psci 1.0 instead of 0.1") marked the i.MX 7 implementation to be PSCI 1.0 compliant but failed to implement those functions. Especially the missing PSCI version callback was noticeable when booting Linux: [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv65535.65535 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.0 This patch provides a minimal implementation thereof. With this patch applied Linux detects PSCI 1.0: [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.0 Fixes: 0ec3d98f ("mx7_common: use psci 1.0 instead of 0.1") Suggested-by: NMark Rutland <mark.rutland@arm.com> Signed-off-by: NStefan Agner <stefan.agner@toradex.com>
-
由 Stefan Agner 提交于
There is no need for assembly in the platform specific part of the PSCI implementation. Note that this does not make it a complete PSCI 1.0 implementation yet but aids to do so in upcoming patches. Signed-off-by: NStefan Agner <stefan.agner@toradex.com>
-
由 Stefan Agner 提交于
A proper stack is required to safely use C code in psci_arch_cpu_entry. Fixes: 486daaa6 ("arm: psci: add a weak function psci_arch_cpu_entry") Cc: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: NStefan Agner <stefan.agner@toradex.com> Acked-by: NPatrick DELAUNAY <Patrick.delaunay@st.com> Tested-by: NPatrick DELAUNAY <Patrick.delaunay@st.com>
-
由 Uri Mashiach 提交于
Enable the support for all SPI flash types. Signed-off-by: NUri Mashiach <uri.mashiach@compulab.co.il> Signed-off-by: NYaniv Levinsky <yaniv.levinsky@compulab.co.il>
-
由 Michael Trimarchi 提交于
Fix an invalid usage of the gpr_init function for the imx6ul architecture Signed-off-by: NMichael Trimarchi <michael@amarulasolutions.com> Acked-by: NJagan Teki <jagan@amarulasolutions.com>
-
由 Michael Trimarchi 提交于
This function can be used only for some of the nxp SoC. Make it explicit in the comment. This adjust a bit commit 3aa4b703 ("imx: imx6: Move gpr_init() function to soc.c") Signed-off-by: NMichael Trimarchi <michael@amarulasolutions.com> Acked-by: NJagan Teki <jagan@amarulasolutions.com>
-
由 Fabio Estevam 提交于
i.MX7 does not support BMODE due to the erratum e10574 ("Watchdog: A watchdog timeout or software trigger will not reset the SOC"), so remove its support. Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
-
由 Michael Trimarchi 提交于
lcdif_power_down should not be included in spl build to avoid build failure introduced by commit eb111bb3Signed-off-by: NMichael Trimarchi <michael@amarulasolutions.com> Reviewed-by: NPeng Fan <peng.fan@nxp.com>
-
由 Michael Trimarchi 提交于
Add the missing gpio phy reset binding to the gpio and reset time configuration Signed-off-by: NMichael Trimarchi <michael@amarulasolutions.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
由 Jon Nettleton 提交于
Mainline and now the SolidRun 4.9 nxp based tree use the new reorganization of device-tree files that separate out the emmc into its own dtb. u-boot will now look for -emmc in the device tree name if one is detected. Signed-off-by: NJon Nettleton <jon@solid-run.com> Signed-off-by: NBaruch Siach <baruch@tkos.co.il>
-
由 Jon Nettleton 提交于
Previously we had just made broad assumptions with which of our boards had an eMMC or not even though this is a manufacturing time assembly option. This takes the guessing away and actually checks for the existence of an eMMC and sets up the has_emmc environment variable. Signed-off-by: NJon Nettleton <jon@solid-run.com> Signed-off-by: NBaruch Siach <baruch@tkos.co.il>
-
由 Baruch Siach 提交于
This macro is not used. Signed-off-by: NBaruch Siach <baruch@tkos.co.il>
-
由 Jon Nettleton 提交于
The HB2 boards as well as rev 1.5 soms support eMMC booting as well as SDHC. Add the infrastructure to support booting these devices. Signed-off-by: NJon Nettleton <jon@solid-run.com> Signed-off-by: NBaruch Siach <baruch@tkos.co.il>
-
由 Jon Nettleton 提交于
This code is useful for testing the existance of devices that do not have card detect capabilities. This breaks out the core functionality and leaves the actual init logic and error reporting in mmc_start_init(). Signed-off-by: NJon Nettleton <jon@solid-run.com> Signed-off-by: NBaruch Siach <baruch@tkos.co.il> Reviewed-by: NStefano Babic <sbabic@denx.de>
-
由 Baruch Siach 提交于
The IN_PROGRESS macro has been removed in commit bd47c135 (mmc: Fix splitting device initialization). Remove it from the mmc_start_init() function description. Signed-off-by: NBaruch Siach <baruch@tkos.co.il>
-
由 Stefan Agner 提交于
Add support for the Colibri iMX6ULL module which comes with on-board raw NAND. Signed-off-by: NStefan Agner <stefan.agner@toradex.com>
-
由 Stefan Agner 提交于
Signed-off-by: NStefan Agner <stefan.agner@toradex.com>
-
由 Stefan Agner 提交于
The GPMI NAND IP seems to be the same as used in i.MX 6Quad. Use the fsl,imx6q-gpmi-nand compatible string like Linux devices trees are. Signed-off-by: NStefan Agner <stefan.agner@toradex.com>
-
由 Stefan Agner 提交于
This macro allows to detect whether the boot ROM initialized USB already (serial downloader). This is helpful to reliably detect if the system has been recovered via USB serial downloader. Signed-off-by: NStefan Agner <stefan.agner@toradex.com> Acked-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com>
-
由 Stefan Agner 提交于
Support i.MX 6 NAND GPMI driver data from device tree. Signed-off-by: NStefan Agner <stefan.agner@toradex.com>
-
由 Stefano Babic 提交于
If the bootcounter address is in a cached memory, a flush of dcache must occur after updateing the bootcounter. Issue found on i.MX6 where bootcounter is put into the internal (cached) IRAM. Signed-off-by: NStefano Babic <sbabic@denx.de>
-
- 22 7月, 2018 1 次提交
-
-
由 York Sun 提交于
Add Kconfig options SPL_ENV_* and TPL_ENV_* and simplify Makefile. This allows SPL/TPL image has different environment setting from full feature U-Boot. Signed-off-by: NYork Sun <york.sun@nxp.com>
-