- 18 10月, 2010 10 次提交
-
-
由 Steve Sakoman 提交于
This patch fixes the build breakage introduced by the recent relocation changes for ARMV7 Signed-off-by: NSteve Sakoman <steve@sakoman.com>
-
由 Sukumar Ghorai 提交于
The SDP4430 does not have onboard NAND, it has eMMC on the second MMC slot. This patch adds support for saving the u-boot environment to eMMC. Signed-off-by: NAneesh V <aneesh@ti.com> Signed-off-by: NSukumar Ghorai <s-ghorai@ti.com> Tested-by: NSteve Sakoman <steve@sakoman.com>
-
由 Steve Sakoman 提交于
This patch switches from the legacy mmc driver to the new generic mmc driver Signed-off-by: NSteve Sakoman <steve@sakoman.com>
-
由 Steve Sakoman 提交于
This patch switches from the legacy mmc driver to the new generic mmc driver Signed-off-by: NSteve Sakoman <steve@sakoman.com>
-
由 Sukumar Ghorai 提交于
This patch switches from the legacy mmc driver to the new generic mmc driver Signed-off-by: NSukumar Ghorai <s-ghorai@ti.com> Tested-by: NSteve Sakoman <steve@sakoman.com>
-
由 Sukumar Ghorai 提交于
This patch switches from the legacy mmc driver to the new generic mmc driver Signed-off-by: NSukumar Ghorai <s-ghorai@ti.com> Tested-by: NSteve Sakoman <steve@sakoman.com>
-
由 Sukumar Ghorai 提交于
OMAP boards currently use a legacy mmc driver. This patch adds a new mmc driver which will work with the generic mmc driver in u-boot. This new driver will work with both OMAP3 and OMAP4 boards. This patch does not remove the old driver. It should remain in the tree until all boards that use it switch to the new driver. Signed-off-by: NSukumar Ghorai <s-ghorai@ti.com> Tested-by: NSteve Sakoman <steve@sakoman.com>
-
由 Sukumar Ghorai 提交于
The current mmc driver returns erroneous capacity information for eMMC. The capacity of eMMC devices is available only in the ext-CSD register. This patch add code to read the ext-CDSD register and correctly calculate eMMC capacity. Signed-off-by: NSukumar Ghorai <s-ghorai@ti.com> Acked-by: NSteve Sakoman <steve@sakoman.com>
-
由 Steve Sakoman 提交于
TI hasn't reserved a USB Product ID for gadgets, so use the default vendor and product ID to avoid confusion. Signed-off-by: NSteve Sakoman <steve@sakoman.com>
-
-
- 14 10月, 2010 12 次提交
-
-
由 Loic Minier 提交于
Signed-off-by: NLoic Minier <loic.minier@linaro.org> CC: stefano babic <sbabic@denx.de>
-
由 Steve Sakoman 提交于
The crash was occuring in env_relocate because it was being called prior to mmc_initialize. This patch moves the MMC initialization earlier in the init process. This patch also cleans up the env_relocate_spec code in env_mmc.c Signed-off-by: NSteve Sakoman <steve.sakoman@linaro.org> Acked-by: NStefano Babic <sbabic@denx.de>
-
-
-
-
由 Matthew McClintock 提交于
Fix build error introduced in beca5a5f common/libcommon.a(fdt_support.o): In function `fdt_add_edid': /local/hudson/jobs/mirrors-u-boot.git/workspace/common/fdt_support.c:1205: undefined reference to `fdt_increase_size' make: *** [u-boot] Error 1 Signed-off-by: NMatthew McClintock <msm@freescale.com> Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
由 Stefano Babic 提交于
Signed-off-by: NStefano Babic <sbabic@denx.de>
-
由 Stefano Babic 提交于
The patch adds the EHCI controller for the i.MX31 Soc. Signed-off-by: NStefano Babic <sbabic@denx.de>
-
由 Stefano Babic 提交于
The patch adds a utility function and defines to set the pad as it is done in linux. Signed-off-by: NStefano Babic <sbabic@denx.de>
-
由 Stefano Babic 提交于
The patch adds the possibility to update the QONG FPGA (a Lattice XP2-5E) with u-boot using some GPIOs to drive the JTAG interface. Signed-off-by: NStefano Babic <sbabic@denx.de>
-
由 Stefano Babic 提交于
Signed-off-by: NStefano Babic <sbabic@denx.de>
-
由 Stefano Babic 提交于
The patch adds support to load a Lattice's bitstream image (called VME file) into a Lattice FPGA. The code containing the state machine delivered as part of Lattice's ispVMtools is integrated. The FPGA is programmed using the JTAG interface. The board maintainer must provide accessors to drive the JTAG signals TCK, TMS, TDI and to get the value of the input signal TDO. Signed-off-by: NStefano Babic <sbabic@denx.de>
-
- 13 10月, 2010 18 次提交
-
-
由 Bryan Wu 提交于
This is a change similar to what is already in the Linux driver. We should only program the CLRDATATOG bit when the current mode indicates that it is needed. Signed-off-by: NBryan Wu <bryan.wu@analog.com> Signed-off-by: NCliff Cai <cliff.cai@analog.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Ludovic Courtès 提交于
This patch changes `usb_stor_scan' to scan all the LUNs of each mass storage device. It also fixes the various commands to correctly set the LUN field. Notably, it allows each LUN of GuruPlug's microSD card reader to be accessed. Signed-off-by: NLudovic Courtès <ludo@gnu.org> Acked-by: NPrafulla Wadaskar <prafulla@marvell.com>
-
由 Vitaly Kuzmichev 提交于
After gadget reinitializaton (after tftp has been done once) packet_received may become equal to 1 due to nuking OUT_EP while disabling it in eth_reset_config. rx_submit called from usb_eth_init queues rx_req first time. But the first call of usb_eth_recv from NetLoop queues rx_req again due to packet_received = 1. The following flow shows the path of functions calls when this happens: net/net.c:NetLoop | +-net/eth.c:eth_init | ether.c:usb_eth_init | | | +-udc_driver:usb_gadget_handle_interrupts | | udc_driver:... | | ether.c:eth_setup | | ether.c:eth_set_config | | ether.c:eth_reset_config | | udc_driver:usb_ep_disable | | udc_driver:nuke | | ether.c:rx_complete | | ether.c: packet_received = 1; | | | +-ether.c:rx_submit | udc_driver:usb_ep_queue --- The first time when rx_req is queued | +-net/eth.c:eth_rx ether.c:usb_eth_recv | +-udc_driver:usb_gadget_handle_interrupts | udc_driver:... --- no interrupts, returning +-ether.c: if (packet_received) { ... ether.c:rx_submit udc_driver:usb_ep_queue --- The second time! Signed-off-by: NVitaly Kuzmichev <vkuzmichev@mvista.com>
-
由 Vitaly Kuzmichev 提交于
Remove and fix needless and destructive operations with tx/rx_req. 1) 'req' in rx_complete is always not NULL and always equals to rx_req 2) Free allocated tx_req if rx_req allocation has failed 3) Do not zero out tx/rx_req in usb_eth_init, leave this for eth_reset_config which will be called at the next use of usb0 4) Additional check in usb_eth_recv is not required Signed-off-by: NVitaly Kuzmichev <vkuzmichev@mvista.com>
-
由 Marek Vasut 提交于
This fixes TIMEOUT with my Kingston 32GB USB3.0 flashdrive, which I experienced on my PXA270 (USB 1.1) Vpac270 board. Signed-off-by: NMarek Vasut <marek.vasut@gmail.com>
-
由 Andreas Bießmann 提交于
This patch fixes an error when running MAKEALL for ARM9. On OS X /bin/sh uses builtin echo which does not utilise '-n' switch. GNU manual for builtins recomend to use here-document style to solve this portability issue. This patch removes the usage of 'echo -n' and replace by here-document style or a oneline echo command. Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com> CC: Peter Pearse <peter.pearse@arm.com>
-
由 Matt Waddel 提交于
The pl01x serial driver was lacking the code to switch baudrates from the command line. Fixed by simply saving the new baudrate and calling serial_init() again. Also fixed CamelCase variables, I/O accessors and comment style. Signed-off-by: NMatt Waddel <matt.waddel@linaro.org>
-
由 Matt Waddel 提交于
Adds support for the ARM quad-core Cortex-A9 processor This system includes a motherboard(Versatile Express), daughterboard (Coretile), and SOC(Cortex-A9 quad core). The serial port, ethernet, and flash systems work with these additions. The naming convention is: SOC -> CortexA9 quad core = ca9x4 daughterboard -> Coretile = ct motherboard -> Versatile Express = vxp This gives ca9x4_ct_vxp.c as the board support file. Signed-off-by: NMatt Waddel <matt.waddel@linaro.org>
-
由 Andreas Bießmann 提交于
Merge several sizes.h in asm/arch subdirectories into a single asm/sizes.h file. Fixup usage of asm/arch/sizes.h in some files to use the merged file. Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
-
由 Ben Gardiner 提交于
There were some #undef's of CONFIG_SYS_ARM_WITHOUT_RELOC added to a few board configs as part of the arm relocation series; but these are not needed now as we do not #undef what is not #defined in the first place. Signed-off-by: NBen Gardiner <bengardiner@nanometrics.ca> CC: Heiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Prafulla Wadaskar 提交于
All Kirkwood based boards are supported for this new implementation ref: docs/README.arm-relocation Signed-off-by: NPrafulla Wadaskar <prafulla@marvell.com>
-
由 Prafulla Wadaskar 提交于
It is observed that, in most of the board configs the code is being duplicated, also for any common change all board files needs update This issue was under discussion from long on mailing list and we converge on introducing common config file. With this patch- 1. Total Kirkwood specific configuration code is reduced by 210 lines 2. All common configuration can be shared by multiple boards 3. Easy to manage common updates like ARM relocation changes mv-common.h file is added to include/configs/ It contains all common configuration supported for all Kirkwood boards The respective board configs are updated for its usage Build tested for guruplug, mv88f6281gtw_ge, openrd_base, rd6281a and sheevaplug Binary execution tested for sheevaplug Todo: 1. Other custom Kirkwood boards to be synced 2. The support to be extended for Orion5X based boards Signed-off-by: NPrafulla Wadaskar <prafulla@marvell.com>
-
由 Prafulla Wadaskar 提交于
For all Kirkwood boards so far dram_init function is duplicated dram_init function is moved to dram.c and relevant code from all board specific files removed If any board needs specific dram init handling than standard one, then, a macro CONFIG_SYS_BOARD_DRAM_INIT should be defined in board config header file and the dram_init function can be put in board specific source file For ex. keymile boards Signed-off-by: NPrafulla Wadaskar <prafulla@marvell.com>
-
由 Albert Aribaud 提交于
Signed-off-by: NChris Moore <moore@free.fr> Signed-off-by: NAlbert Aribaud <albert.aribaud@free.fr>
-
由 Prafulla Wadaskar 提交于
Earlier Device Identification register was used to detect the type for SoC, considering 88F6282 support to be added, It is not possible to detect the same using current algorithm. With this patch, device ID is being read using PCIE devid register, also valid chip revision ID will also be read and displayed Signed-off-by: NPrafulla Wadaskar <prafulla@marvell.com>
-
由 Albert Aribaud 提交于
mvsata_ide_initialize_port(): adjust init sequence (SStatus should be checked only after all writes to SControl) and return success/failure to ide_preinit(). Also, as some tests showed init durations in the hundreds of us, raise the time-out to 01 ms to be on the safe side. Signed-off-by: NAlbert Aribaud <albert.aribaud@free.fr>
-