- 29 6月, 2010 1 次提交
-
-
由 Wolfgang Denk 提交于
Commit 460c2ce3 "MPC5200: workaround data corruption for unaligned local bus accesses" fixed the problem for MPC5200 only, but MPC512x is affected as well, so apply the same fix here, too. Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Detlev Zundel <dzu@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Acked-by: NDetlev Zundel <dzu@denx.de>
-
- 24 6月, 2010 1 次提交
-
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
- 23 6月, 2010 10 次提交
-
-
由 Wolfgang Denk 提交于
The MPC5200 has a nasty problem that will cause silent data corruption when performing unaligned 16 or 32 byte accesses when reading from the local bus - typically this affects reading from flash. The problem can be easily shown: => md fc0c0000 10 fc0c0000: 323e4337 01626f6f 74636d64 3d72756e 2>C7.bootcmd=run fc0c0010: 206e6574 5f6e6673 00626f6f 7464656c net_nfs.bootdel fc0c0020: 61793d35 00626175 64726174 653d3131 ay=5.baudrate=11 fc0c0030: 35323030 00707265 626f6f74 3d656368 5200.preboot=ech => md fc0c0001 10 fc0c0001: 65636801 00000074 0000003d 00000020 ech....t...=... fc0c0011: 0000005f 00000000 00000074 00000061 ..._.......t...a fc0c0021: 00000000 00000064 00000065 00000035 .......d...e...5 fc0c0031: 00000000 00000062 0000003d 0000006f .......b...=...o => md.w fc0c0001 10 fc0c0001: 0000 3701 0000 6f74 0000 643d 0000 6e20 ..7...ot..d=..n fc0c0011: 0000 745f 0000 7300 0000 6f74 0000 6c61 ..t_..s...ot..la This commit implements a workaround at least for the most blatant problem: using memcpy() from NOR flash. We rename the assembler routine into __memcpy() and provide a wrapper, which will use a byte-wise copy loop for unaligned source or target addresses when reading from NOR flash, and branch to the optimized __memcpy() in all other cases, thus minimizing the performance impact. Tested on lite5200b and TQM5200S. Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Detlev Zundel <dzu@denx.de>
-
由 Minkyu Kang 提交于
ATAG_VIDEOLFB is not used anywhere. The belowing warning is occurred due to this ATAG. [ 0.000000] Ignoring unrecognised tag 0x54410008 This patch fixed it. Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Acked-by: NMartin Krause <Martin.Krause@tqs.de>
-
由 Peter Horton 提交于
UBI: initialise update marker The in kernel copy of a volume's update marker is not initialised from the volume table. This means that volumes where an update was unfinnished will not be treated as "forbidden to use". This is basically that the update functionality was broken. Signed-off-by: NPeter Horton <zero@colonel-panic.org> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Acked-by: NStefan Roese <sr@denx.de>
-
由 Guennadi Liakhovetski 提交于
Since I haven't been actively maintaining these boards for a long while, keeping myself as their maintainer makes no sense. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
-
由 Ilya Yanok 提交于
Ensure that date is called only with LC_ALL=C locale set to make dates locale neutral thus preventing lurking of non-ASCII characters into U-Boot binary. Signed-off-by: NIlya Yanok <yanok@emcraft.com> Changed LANG= into LC_ALL= as suggested by Mike Frysinger <vapier@gentoo.org> Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
-
由 Albert Aribaud 提交于
Orion5x MPP and GPIO setting code had writel arguments the wrong way around. Fixed and tested. Signed-off-by: NAlbert Aribaud <albert.aribaud@free.fr>
-
由 Terry Lv 提交于
Signed-off-by: NTerry Lv <r65388@freescale.com> Fix commit message and code formatting. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Vitaly Kuzmichev 提交于
The ARM ABI requires that the stack be aligned to 8 bytes as it is noted in Procedure Call Standard for the ARM Architecture: http://infocenter.arm.com/help/topic/com.arm.doc.ihi0042d/index.html Unaligned SP also causes the problem with variable-length arrays allocation when VLA address becomes less than stack pointer during aligning of this address, so the next 'push' in the stack overwrites first 4 bytes of VLA. Signed-off-by: NVitaly Kuzmichev <vkuzmichev@mvista.com> Tested on tx25(mx25), imx27lite(mx27), qong(mx31) and trab(s3c2400) Tested-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
-
- 21 6月, 2010 2 次提交
-
-
由 Wolfgang Denk 提交于
Move it inside the #ifdef CONFIG_NET_MULTI to avoid eth.c:64: warning: 'eth_mac_skip' defined but not used messages from a number of old, non-CONFIG_NET_MULTI boards. Signed-off-by: NWolfgang Denk <wd@denx.de> Signed-off-by: NBen Warren <biggerbadderben@gmail.com>
-
由 Fillod Stephane 提交于
TFTP'ing a file of size 1747851 bytes with CONFIG_IP_DEFRAG and CONFIG_TFTP_BLOCKSIZE set to 4096 fails with a timeout, because the last fragment is not taken into account. This patch fixes IP fragments having less than 8 bytes of payload. Signed-off-by: NStephane Fillod <stephane.fillod@grassvalley.com> Acked-by: NAlessandro Rubini <rubini@gnudd.com> Signed-off-by: NBen Warren <biggerbadderben@gmail.com>
-
- 20 6月, 2010 2 次提交
-
-
由 Wolfgang Denk 提交于
Move it inside the #ifdef CONFIG_NET_MULTI to avoid eth.c:64: warning: 'eth_mac_skip' defined but not used messages from anumber of old, non-CONFIG_NET_MULTI boards. Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Ben Warren <biggerbadderben@gmail.com>
-
由 Wolfgang Denk 提交于
Commit 37566090 "compiler.h: unify system ifdef cruft here" added both a "#include <errno.h>" and a "extern int errno;" to include/compiler.h which is causing build warnings for some systems, for example for the "netstar" board: In file included from /home/wd/git/u-boot/work/lib/crc32.c:15: include/compiler.h:28: warning: function declaration isn't a prototype The declaration of "errno" should be redundant, as <errno.h> is supposed to provide a correct declaration, so drop it. Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Mike Frysinger <vapier@gentoo.org>
-
- 18 6月, 2010 5 次提交
-
-
由 Wolfgang Denk 提交于
The push / pop instructions used in this file are available only with more recent tool chains: cache.S: Assembler messages: cache.S:133: Error: bad instruction `push {r0,r1,r2,lr}' cache.S:160: Error: bad instruction `pop {r1,r2,r3,pc}' cache.S:164: Error: bad instruction `push {r0,r1,r2,lr}' cache.S:191: Error: bad instruction `pop {r1,r2,r3,pc}' Change push/pop into stmfd/ldmfd instructions to support older versions of binutils as well. I verified that the modified source code generates exactly the same binary code. Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Sandeep Paulraj <s-paulraj@ti.com> Cc: Tom Rix <tom@bumblecow.com>
-
-
-
git://git.denx.de/u-boot-ti由 Wolfgang Denk 提交于
Conflicts: CONFLICT (rename/add): Rename board/davinci/da830evm/Makefile->board/ti/tnetv107xevm/Makefile in 89b765c7. board/ti/tnetv107xevm/Makefile added in HEAD But files were identical, so no problem. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
-
- 17 6月, 2010 3 次提交
-
-
由 Albert Aribaud 提交于
This patch adds support for the LaCie ED Mini V2 product which is based on the Marvell Orion5x SoC. Signed-off-by: NAlbert Aribaud <albert.aribaud@free.fr>
-
由 Albert Aribaud 提交于
This patch provides access to the 16550-compatible serial device of the Orion5x SoC. Signed-off-by: NAlbert Aribaud <albert.aribaud@free.fr>
-
由 Albert Aribaud 提交于
This patch adds support for the Marvell Orion5x SoC. It has no use alone, and must be followed by a patch to add Orion5x support for serial, then support for the ED Mini V2, an Orion5x-based product from LaCie. Signed-off-by: NAlbert Aribaud <albert.aribaud@free.fr>
-
- 15 6月, 2010 3 次提交
-
-
由 Minkyu Kang 提交于
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Acked-by: NTom <Tom@bumblecow.com>
-
由 Minkyu Kang 提交于
This patch adds support for the Samsung Goni board (S5PC110 SoC) Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
由 Minkyu Kang 提交于
When set to PULL_NONE, gpio_set_pull function is returned without write the register. This patch fixed it. Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
- 13 6月, 2010 2 次提交
-
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Marek Vasut 提交于
Part of this patch is by: Mikhail Kshevetskiy. Stack must be aligned to 8 bytes on PXA (possibly all armv5te) for LDRD/STRD instructions. In case LDRD/STRD is issued on an unaligned address, the behaviour is undefined. The issue was observed when working with the NAND code, which was rendered disfunctional. Also, the vsprintf() function had serious problems with printing 64bit wide long longs. After aligning the stack, this wrong behaviour is no longer present. Tested on: Marvell Littleton PXA310 board Toradex Colibri PXA320 board Aeronix Zipit Z2 PXA270 handheld Voipac PXA270 board Signed-off-by: NMarek Vasut <marek.vasut@gmail.com>
-
- 11 6月, 2010 3 次提交
-
-
由 Sudhakar Rajashekhara 提交于
Provides initial support for TI OMAP-L138/DA850 SoC devices on a Logic PD EVM board. Provides: Initial boot and configuration. Support for i2c. UART support (console). Signed-off-by: NSudhakar Rajashekhara <sudhakar.raj@ti.com> Acked-by: NBen Gardiner <bengardiner@nanometrics.ca> Reviewed-by: NWolfgang Denk <wd@denx.de> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Sudhakar Rajashekhara 提交于
DA850/OMAP-L138 is a new SoC from Texas Instruments (http://focus.ti.com/docs/prod/folders/print/omap-l138.html). This SoC is similar to DA830/OMAP-L137 in many aspects. Hence rename the da830 specific files and folders to da8xx to accommodate DA850/OMAP-L138. Signed-off-by: NSudhakar Rajashekhara <sudhakar.raj@ti.com> Acked-by: NBen Gardiner <bengardiner@nanometrics.ca> Reviewed-by: NWolfgang Denk <wd@denx.de> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Sudhakar Rajashekhara 提交于
TI's DA850/OMAP-L138 platform is similar to DA830/OMAP-L137 in many aspects. So instead of repeating the same code in multiple files, move the common code to a different file and call those functions from the respective da830/da850 files. Signed-off-by: NSudhakar Rajashekhara <sudhakar.raj@ti.com> Acked-by: NNick Thompson <nick.thompson@ge.com> Acked-by: NBen Gardiner <bengardiner@nanometrics.ca> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
- 09 6月, 2010 1 次提交
-
-
由 Grazvydas Ignotas 提交于
Pandora has a capacitor connected as backup battery, which allows retaining RTC for some time while main battery is removed. Enable backup battery charge function to charge that capacitor. Signed-off-by: NGrazvydas Ignotas <notasas@gmail.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
- 08 6月, 2010 7 次提交
-
-
由 Delio Brignoli 提交于
I have updated this patch based on the comments [1] by Wolfgang Denk and removed unused variables. [1][http://lists.denx.de/pipermail/u-boot/2010-May/071728.html] Reduce the number of reads per byte transferred on the BUF register from 2 to 1 and take advantage of the TX buffer in the SPI module. On LogicPD OMAP-L138 EVM, SPI read throughput goes up from ~0.8Mbyte/s to ~1.3Mbyte/s. Tested with a 2Mbyte image file. Remove unused variables in the spi_xfer() function. Signed-off-by: NDelio Brignoli <dbrignoli@audioscience.com> Tested-by: NBen Gardiner <bengardiner@nanometrics.ca> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Vaibhav Hiremath 提交于
This patch adds support for the EMIF4 interface available in the AM35x processors. Signed-off-by: NVaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: NSanjeev Premi <premi@ti.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Vaibhav Hiremath 提交于
This patch adds basic support for the AM3517EVM. It includes: - Board files (.c and .h) - Default configuration file - Updates for Makefile Signed-off-by: NVaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: NSanjeev Premi <premi@ti.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Vaibhav Hiremath 提交于
Consolidated SDRC related functions into one file - sdrc.c And also replaced sdrc_init with generic memory init function (mem_init), this generalization of omap memory setup is necessary to support the new emif4 interface introduced in AM3517. Signed-off-by: NVaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Vaibhav Hiremath 提交于
initialized for CS1 From: Vaibhav Hiremath <hvaibhav@ti.com> The patch makes sure that size for SDRC CS1 gets calculated only when the CS1 SDRC is initialized. Signed-off-by: NVaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Vaibhav Hiremath 提交于
The EVMS have been shipping with NAND (instead of OneNAND) as default. So, this patch sets NAND as default. To choose OneNAND, define CMD_ONENAND instead of CMD_NAND in the config file omap3_evm.h. Signed-off-by: NVaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Cyril Chemparathy 提交于
TNETV107X is a Texas Instruments SoC based on an ARM1176 core, and with a bunch on on-chip integrated peripherals. This patch adds support for the TNETV107X EVM board. Signed-off-by: NCyril Chemparathy <cyril@ti.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-