- 04 7月, 2011 1 次提交
-
-
由 Aneesh V 提交于
make default implementation of cache_flush() weakly linked so that sub-architectures can override it Signed-off-by: NAneesh V <aneesh@ti.com>
-
- 05 11月, 2010 1 次提交
-
-
由 Steve Sakoman 提交于
Commit c3d3a541 uses CONFIG_ARMV7 to determine whether to call the v7_flush_cache_all function. This breaks the build for all non-OMAP3 boards (like Panda and OMAP4430SDP) since there is only a v7_flush_cache_all implementation for OMAP3. This patch uses CONFIG_OMAP3XXX instead of CONFIG_ARMV7 so that only boards with a v7_flush_cache_all will make the call. Tested on Beagle, Overo, Panda, and OMAP4430SDP Signed-off-by: NSteve Sakoman <steve.sakoman@linaro.org> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
- 13 10月, 2010 1 次提交
-
-
由 Heiko Schocher 提交于
Signed-off-by: NHeiko Schocher <hs@denx.de>
-
- 20 9月, 2010 3 次提交
-
-
由 Heiko Schocher 提交于
Add data cache support for arm1136 systems. Enable "cache" command on Qong board and test performance. Test 1: Loading 127 MB of data from NAND flash into RAM: Instr. Cache off on on Data Cache off off on -------------------------------------------------- QONG (ARM11) 177s 95s 43s = x 4.1 Test 2: uncompressing a gzipped image from RAM to RAM (size compressed: 6.5 MiB, uncompressed: 35 MiB): Instr. Cache off on on Data Cache off off on -------------------------------------------------- QONG (ARM11) 1.54s 0.95s 0.18s = x 8.6 Portions of this work were supported by funding from the CE Linux Forum. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
Add data cache support for ARM V7 systems. Used cache flush functions from linux:arch/arm/mm/cache-v7.S developed from Catalin Marinas. Enable "cache" command on Beagle board and test performance. Test 1: Loading 127 MB of data from NAND flash into RAM: Instr. Cache off on on Data Cache off off on -------------------------------------------------- Beagle (Cortex A8) 116s 106s 30.3s = x 3.8 Test 2: uncompressing a gzipped image from RAM to RAM (size compressed: 6.5 MiB, uncompressed: 35 MiB): Instr. Cache off on on Data Cache off off on -------------------------------------------------- Beagle (Cortex A8) 1.84s 1.64s 0.12s = x 15.3 Portions of this work were supported by funding from the CE Linux Forum. Signed-off-by: NHeiko Schocher <hs@denx.de> Reviewed-by: Ben Gardiner<bengardiner@nanometrics.ca>
-
由 Heiko Schocher 提交于
Enable "cache" command on tx25 and magnesium board and test performance. Test 1: Loading 127 MB of data from NAND flash into RAM: Instr. Cache off on on Data Cache off off on -------------------------------------------------- magnesium 32,6s 22,5s 30s = x 1,09 tx25 (29MB only) 9,69s 5,05s 8,16s = x 1,19 Test 2: uncompressing a gzipped image from RAM to RAM (size compressed: 6.5 MiB, uncompressed: 35 MiB): Instr. Cache off on on Data Cache off off on -------------------------------------------------- magnesium 4,25s 2,08s 1,72s = x 2,47 tx25 4,82s 2,04s 1,84s = x 2,62 Portions of this work were supported by funding from the CE Linux Forum. Signed-off-by: NAlessandro Rubini <rubini@gnudd.com> Signed-off-by: NHeiko Schocher <hs@denx.de> Cc: Alessandro Rubini <rubini@gnudd.com>
-
- 13 4月, 2010 1 次提交
-
-
由 Peter Tyser 提交于
Also move lib_$ARCH/config.mk to arch/$ARCH/config.mk This change is intended to clean up the top-level directory structure and more closely mimic Linux's directory organization. Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>
-
- 10 1月, 2005 1 次提交
-
-
由 wdenk 提交于
add support for the TI OMAP2420 processor and its H4 reference board * Patch by Christian Pellegrin, 24 Sep 2004: Added support for NE2000 compatible (DP8390, DP83902) NICs.
-
- 09 9月, 2002 1 次提交
-
-
由 wdenk 提交于
-
- 14 12月, 2000 1 次提交
-
-
由 wdenk 提交于
-
- 13 11月, 2000 1 次提交
-
-
由 wdenk 提交于
-