- 27 10月, 2014 33 次提交
-
-
由 Valentin Longchamp 提交于
Since i2c_init_all always sets the bus back to CONFIG_SYS_SPD_BUS_NUM for compatibility reasons, it means that any eeprom not located on this CONFIG_SYS_SPD_BUS_NUM is not accessible with the eeprom commands, even if you change the bus number with an i2c dev command before. Furthermore i2c_init_all should disappear and is currently only called from the early board initialisation sequences, it is not suited for other usage. This reverts commit 01a0c647. Signed-off-by: NValentin Longchamp <valentin.longchamp@keymile.com> Acked-by: NMatthias Fuchs <matthias.fuchs@esd.eu>
-
由 Olaf Mandel 提交于
Align the documentation with the include/linux/etherdevice.h , which is where this example comes from. The return value from the check was inverted in the documentation. Signed-off-by: NOlaf Mandel <o.mandel@menlosystems.com> Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com>
-
由 Albert ARIBAUD 提交于
LaCie Wireless Space has no defined maintainer. Set myself as maintainer, since I own one of these. Signed-off-by: NAlbert ARIBAUD <albert.u.boot@aribaud.net>
-
由 Simon Glass 提交于
The run command treats each argument an an environment variable. It gets the value of each variable and executes it as a command. If an environment variable contains a newline and the hush cli is used, it is supposed to execute each line one after the other. Normally a newline signals to hush to exit - this is used in normal command line entry - after a command is entered we want to return to allow the user to enter the next one. But environment variables obviously need to execute to completion. Add a special case for the execution of environment variables which continues when a newline is seen, and add a few tests to check this behaviour. Note: it's not impossible that this may cause regressions in other areas. I can't think of a case but with any change of behaviour with limited test coverage there is always a risk. From what I can tell this behaviour has been around since at least U-Boot 2011.03, although this pre-dates sandbox and I have not tested it on real hardware. Reported-by: NWolfgang Denk <wd@denx.de> Signed-off-by: NSimon Glass <sjg@chromium.org>
-
-
由 Marek Vasut 提交于
This board is old and is using CONFIG_I2C_X, which is wrong. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Heiko Schocher <hs@denx.de>
-
由 Marek Vasut 提交于
This board is old and is using CONFIG_I2C_X, which is wrong. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Heiko Schocher <hs@denx.de>
-
由 Marek Vasut 提交于
This board is old and is using CONFIG_I2C_X, which is wrong. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Heiko Schocher <hs@denx.de>
-
由 Marek Vasut 提交于
This is the only used of CONFIG_SPI_X macro, just zap this. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Heiko Schocher <hs@denx.de>
-
由 Marek Vasut 提交于
Remove this board as this is the only one last user of eeprom_probe(), which is pretty non-standard stuff. This patch also removes all the PHP, SQL and CSS stuff from U-Boot, which probably makes U-Boot a bit less IoT ;-) Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Heiko Schocher <hs@denx.de>
-
由 Marek Vasut 提交于
This board uses eeprom accessors in an incorrect way. The board is old and unsupported, just zap it. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Heiko Schocher <hs@denx.de>
-
由 Marek Vasut 提交于
This board is the only user of CONFIG_SYS_EEPROM_X40430 , remove it so the EEPROM command code can be cleansed of the related code as well. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Heiko Schocher <hs@denx.de>
-
由 Wolfgang Denk 提交于
The file board/Marvell/include/mv_gen_reg.h is incompatible with the GPL (see for example the "MARVELL RESERVES THE RIGHT AT ITS SOLE DISCRETION TO REQUEST THAT THIS CODE BE IMMEDIATELY RETURNED TO MARVELL" clause). As this cannot be fixed, we remove the file and all code that depends on it. Fortunately this only affects some very old boards that have long reached EOL: CPCI750 DB64360 DB64460 p3m750 p3m7448 Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com> Cc: Stefan Roese <sr@denx.de> Cc: Roger Meier <r.meier@siemens.com>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Anatolij Gustschin 提交于
The config targets described in README are not present any more, update the info to currently used targets. Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
由 Anatolij Gustschin 提交于
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
由 Anatolij Gustschin 提交于
Signed-off-by: NAnatolij Gustschin <agust@denx.de> Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
-
由 Anatolij Gustschin 提交于
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
由 Anatolij Gustschin 提交于
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
由 Anatolij Gustschin 提交于
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
由 Anatolij Gustschin 提交于
Also enable CONFIG_DISPLAY_BOARDINFO to get checkboard() called. Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
由 Anatolij Gustschin 提交于
Commit d6b11fd1 (powerpc: remove MBX and MBX860T boards support) removed mbxbar field in "struct sysconf512x" by mistake and broke booting on mpc5121 boards. Fix it. Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
-
-
-
由 Marek Vasut 提交于
Add example configuration stub for the DWC2 USB controller. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Vince Bridgers <vbridger@altera.com> Cc: Pavel Machek <pavel@denx.de>
-
由 Andreas Bießmann 提交于
socfpgaimage utilizes htole32 and friends, unfortunately these functions are not available on darwin. Fix it by using the cpu_to_le32 and friends defined in compiler.h as other parts in mkimage do. This patch fixes the following error: ---8<--- HOSTCC tools/socfpgaimage.o tools/socfpgaimage.c:77:22: warning: implicit declaration of function 'htole32' is invalid in C99 [-Wimplicit-function-declaration] header.validation = htole32(VALIDATION_WORD); ^ tools/socfpgaimage.c:80:22: warning: implicit declaration of function 'htole16' is invalid in C99 [-Wimplicit-function-declaration] header.length_u32 = htole16(length_bytes/4); ^ tools/socfpgaimage.c:95:6: warning: implicit declaration of function 'le32toh' is invalid in C99 [-Wimplicit-function-declaration] if (le32toh(header.validation) != VALIDATION_WORD) ^ tools/socfpgaimage.c:97:6: warning: implicit declaration of function 'le16toh' is invalid in C99 [-Wimplicit-function-declaration] if (le16toh(header.checksum) != hdr_checksum(&header)) ^ 4 warnings generated. ... HOSTLD tools/dumpimage Undefined symbols for architecture x86_64: "_htole16", referenced from: _socfpgaimage_set_header in socfpgaimage.o "_htole32", referenced from: _socfpgaimage_set_header in socfpgaimage.o "_le16toh", referenced from: _verify_buffer in socfpgaimage.o "_le32toh", referenced from: _verify_buffer in socfpgaimage.o ld: symbol(s) not found for architecture x86_64 --->8--- Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com> Acked-by: NPavel Machek <pavel@denx.de>
-
由 Marek Vasut 提交于
This is not used anywhere, remove it. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Acked-by: NDinh Nguyen <dinguyen@opensource.altera.com> Cc: Vince Bridgers <vbridger@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Pavel Machek <pavel@denx.de>
-
由 Marek Vasut 提交于
Switch to the common spl.h file and zap the arch/spl.h . Since the arch/spl.h contained various ad-hoc symbols, zap those symbols as well and rework the board configuration a little so it doesn't depend on them. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Vince Bridgers <vbridger@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Acked-by: NPavel Machek <pavel@denx.de>
-
由 Marek Vasut 提交于
Move this initialization code to proper place. The misc_init_r() function is called way too late and the platform initialization code should be executed much earlier. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Vince Bridgers <vbridger@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Acked-by: NPavel Machek <pavel@denx.de>
-
-
-
git://git.denx.de/u-boot-dm由 Tom Rini 提交于
Fix a trivial conflict over adding <dm.h> Conflicts: arch/arm/cpu/armv7/omap3/board.c Signed-off-by: NTom Rini <trini@ti.com>
-
- 26 10月, 2014 7 次提交
-
-
由 Jeroen Hofstee 提交于
Include the i2c header and change the non confirming functions to do so. Cc: Heiko Schocher <hs@denx.de> Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl> Acked-by: NHeiko Schocher <hs@denx.de> [trini: Fix i2c_get_bus_num prototype] Signed-off-by: NTom Rini <trini@ti.com>
-
由 Jeroen Hofstee 提交于
while at it, fix a typo Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>
-
由 Jeroen Hofstee 提交于
Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>
-
由 Jeroen Hofstee 提交于
Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>
-
由 Jeroen Hofstee 提交于
Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>
-
由 Jeroen Hofstee 提交于
Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>
-
由 Jeroen Hofstee 提交于
Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>
-