- 01 9月, 2014 4 次提交
-
-
由 Simon Glass 提交于
Add a bank of GPIOs for sandbox which can be used for testing this functionality. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
The gpio command mostly relies on gpio_request() and gpio_free() being nops, in that you can request a GPIO twice. With driver model this is now implemented correctly, so it fails. Change the command to deal with a failure to claim the GPIO. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
The GPIO list is very long in many cases and most of them are not used. By default, show only the GPIOs that are in use, and provide a flag to show all of them. This makes the 'gpio status' command much more pleasant. In order to do this, driver model now exposes a method for obtaining the 'function' of a GPIO, which describes whether it is an input or output, for example. Implementation of this method is optional. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Masahiro Yamada 提交于
The QS Systems TQMa6 board support was added by commit cb07d74e and lost by commit e82abaeb. Commit e82abaeb merged the IMX branch based on pre-Kconfig and the mainline based on post-Kconfig, simply deleting the boards.cfg file. As a result, some boards added just before the merge were lost. This commit adds Kconfig, defconfig, MAINTAINERS for TQMa6 board to work on the Kconfig infrastructure. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Markus Niebel <Markus.Niebel@tq-group.com> Cc: Stefano Babic <sbabic@denx.de>
-
- 31 8月, 2014 15 次提交
-
-
-
由 Masahiro Yamada 提交于
Becuase the board select menu in arch/arm/Kconfig is too big, move the Nomadik board select menu to nomadik/Kconfig. Move also common settings (CONFIG_SYS_CPU="arm926ejs" and CONFIG_SYS_SOC="nomadik"). Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
Move Highbank-specific settings to highbank/Kconfig. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Rob Herring <robh@kernel.org>
-
由 Masahiro Yamada 提交于
Becuase the board select menu in arch/arm/Kconfig is too big, move the Orion5x board select menu to orion5x/Kconfig. Move also common settings (CONFIG_SYS_CPU="arm926ejs" and CONFIG_SYS_SOC="orion5x"). Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
-
由 Masahiro Yamada 提交于
Becuase the board select menu in arch/arm/Kconfig is too big, move the Keystone board select menu to keystone/Kconfig. Move also common settings (CONFIG_SYS_CPU="armv7" and CONFIG_SYS_SOC="keystone"). Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Reviewed-by: NTom Rini <trini@ti.com> Cc: Vitaly Andrianov <vitalya@ti.com>
-
由 Masahiro Yamada 提交于
Becuase the board select menu in arch/arm/Kconfig is too big, move the OMAP5 board select menu to omap5/Kconfig. Move also common settings (CONFIG_SYS_CPU="armv7" and CONFIG_SYS_SOC="omap5"). Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Reviewed-by: NTom Rini <trini@ti.com> Cc: Lokesh Vutla <lokeshvutla@ti.com>
-
由 Masahiro Yamada 提交于
Becuase the board select menu in arch/arm/Kconfig is too big, move the OMAP4 board select menu to omap4/Kconfig. Move also common settings (CONFIG_SYS_CPU="armv7" and CONFIG_SYS_SOC="omap4"). Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Reviewed-by: NTom Rini <trini@ti.com> Cc: Lokesh Vutla <lokeshvutla@ti.com>
-
由 Masahiro Yamada 提交于
Becuase the board select menu in arch/arm/Kconfig is too big, move the OMAP3 board select menu to omap3/Kconfig. Move also common settings (CONFIG_SYS_CPU="armv7" and CONFIG_SYS_SOC="omap3 Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Reviewed-by: NTom Rini <trini@ti.com>
-
由 Masahiro Yamada 提交于
Becuase the board select menu in arch/arm/Kconfig is too big, move the Davinci board select menu to davinci/Kconfig. Move also common settings (CONFIG_SYS_CPU="arm926ejs" and CONFIG_SYS_SOC="davinci"). Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Reviewed-by: NTom Rini <trini@ti.com> Cc: Heiko Schocher <hs@denx.de> Cc: Sandeep Paulraj <s-paulraj@ti.com>
-
由 Masahiro Yamada 提交于
Becuase the board select menu in arch/arm/Kconfig is too big, move the Exynos board select menu to exynos/Kconfig. Consolidate also common settings (CONFIG_SYS_CPU="armv7" and CONFIG_SYS_SOC="exynos"). Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Masahiro Yamada 提交于
Becuase the board select menu in arch/arm/Kconfig is too big, move the KirkWood board select menu to kirkwood/Kconfig. Consolidate also common settings (CONFIG_SYS_CPU="arm926ejs" and CONFIG_SYS_SOC="kirkwood"). Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: NPrafulla Wadasdkar <prafulla@marvell.com> Cc: Luka Perkov <luka@openwrt.org>
-
由 Masahiro Yamada 提交于
Move Versatile-specific settings to versatile/Kconfig. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
Becuase the board select menu in arch/arm/Kconfig is too big, move the Rmobile board select menu to rmobile/Kconfig. Consolidate also common settings (CONFIG_SYS_CPU="armv7" and CONFIG_SYS_SOC="rmobile"). Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
-
由 Masahiro Yamada 提交于
Becuase the board select menu in arch/arm/Kconfig is too big, move the Tegra board select menu to tegra/Kconfig. Insert the Tegra SoC select menu between the arch select and the board select. Architecture select |-- Tegra Platform (Tegra) |- Tegra SoC select (Tegra20 / 30 / 114 / 124) |- Board select Consolidate also common settings (CONFIG_SYS_CPU="armv7" and CONFIG_SYS_SOC="tegra*") and always "select" CONFIG_SPL as follows: config TEGRA bool select SPL Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: NStephen Warren <swarren@nvidia.com> Cc: Tom Warren <twarren@nvidia.com>
-
由 Masahiro Yamada 提交于
Becuase the board select menu in arch/arm/Kconfig is too big, move the Zynq board select menu to zynq/Kconfig. Consolidate also common settings (CONFIG_SYS_CPU="armv7" and CONFIG_SYS_SOC="zynq"). Refactor board/xilinx/zynq/MAINTAINERS too. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Tested-by: NMichal Simek <michal.simek@xilinx.com>
-
- 30 8月, 2014 21 次提交
-
-
由 Benoît Thébaudeau 提交于
Commit 41623c91 'arm: move exception handling out of start.S files' missed some linker scripts. Hence, some boards no longer had exception handling linked since this commit. Restore the original behavior by adding the .vectors section to these linker scripts. Signed-off-by: NBenoît Thébaudeau <benoit.thebaudeau.dev@gmail.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
-
由 Holger Brunck 提交于
Newer FLASH types used on these boards don't allow writing of subpages. So disable subpage write in the NAND driver. Additionally we need to tell the UBI layer in the kernel that he also should only write 2048 bytes. This is done with an additional command line parameter for the kernel commandline. Signed-off-by: NHolger Brunck <holger.brunck@keymile.com> cc: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Prafulla Wadaskar <prafulla@marvell.com>
-
由 Holger Brunck 提交于
Make it configurable to disable subpage writes like the DaVinci NAND driver already does. Signed-off-by: NHolger Brunck <holger.brunck@keymile.com> cc: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Prafulla Wadaskar <prafulla@marvell.com> cc: Scott Wood <scottwood@freescale.com>
-
由 Tom Rini 提交于
Add support for booting Images and for unzipping Image.gz files. Signed-off-by: NTom Rini <trini@ti.com>
-
由 Tom Rini 提交于
- Drop DEBUG - Drop defines we can use the default of. - Provide a larger malloc pool. - Correct default locations for kernel / initrd / device tree Signed-off-by: NTom Rini <trini@ti.com>
-
由 Tom Rini 提交于
The default format for arm64 Linux kernels is the "Image" format, described in Documentation/arm64/booting.txt. This, along with an optional gzip compression on top is all that is generated by default. The Image format has a magic number within the header for verification, a text_offset where the Image must be run from, an image_size that includes the BSS and reserved fields. This does not support automatic detection of a gzip compressed image. Signed-off-by: NTom Rini <trini@ti.com>
-
由 Tom Rini 提交于
The Documentation/arm64/booting.txt document says that pass in x1/x2/x3 as 0 as they are reserved for future use. Signed-off-by: NTom Rini <trini@ti.com>
-
由 Steve Rae 提交于
Convert the bcm958300k and the bcm958622hr boards from "boards.cfg" to Kconfig. Signed-off-by: NSteve Rae <srae@broadcom.com>
-
由 Scott Branden 提交于
The bcm_ep board configuration is used by a number of boards including Cygnus and NSP. Add builds for the bcm958300k and the bcm958622hr boards. Signed-off-by: NScott Branden <sbranden@broadcom.com> Signed-off-by: NSteve Rae <srae@broadcom.com>
-
由 Scott Branden 提交于
Base support for the Broadcom NSP SoC. Based on iproc-common and the SoC specific reset function. Signed-off-by: NScott Branden <sbranden@broadcom.com> Signed-off-by: NSteve Rae <srae@broadcom.com>
-
由 Scott Branden 提交于
Base support for the Broadcom Cygnus SoC. Based on iproc-common and the SoC specific reset function. Signed-off-by: NScott Branden <sbranden@broadcom.com> Signed-off-by: NSteve Rae <srae@broadcom.com>
-
由 Scott Branden 提交于
The iproc architecture code is present in several Broadcom chip architectures, including Cygnus and NSP. Signed-off-by: NScott Branden <sbranden@broadcom.com> Signed-off-by: NSteve Rae <srae@broadcom.com>
-
由 Stefan Agner 提交于
Add NFC (NAND Flash Controller) clock support and enable them at board initialization time. Signed-off-by: NStefan Agner <stefan@agner.ch>
-
由 Stefan Agner 提交于
Add pin mux for NAND Flash Controller (NFC). NAND can be connected using 8 or 16 data lines, this patch adds pin mux entries for all 16 data lines. Signed-off-by: NStefan Agner <stefan@agner.ch>
-
由 Masahiro Yamada 提交于
The email address of Matt Waddel is no longer working. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Alexei Fedorov <alexie.fedorov@arm.com>
-
由 Marek Vasut 提交于
The patch fixes a corner case where adding size to DRAM start resulted in a value (1 << 32), which in turn overflew the u32 computation, which resulted in 0 and it therefore prevented correct setup of the MMU tables. The addition of DRAM bank start and it's size can end up right at the end of the address space in the special case of a machine with enough memory. To prevent this overflow, shift the start and size separately and add them only after they were shifted. Hopefully, we only have systems in tree which have DRAM size aligned to 1MiB boundary. If not, this patch would break such systems. On the other hand, such system would be broken by design anyway. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
-
由 Steve Rae 提交于
Add board which has Broadcom StarFighter2 Ethernet capability. Signed-off-by: NSteve Rae <srae@broadcom.com>
-
由 Jiandong Zheng 提交于
The Broadcom StarFighter2 Ethernet driver is used in multiple Broadcom SoC(s) and: - supports multiple MAC blocks, - provides support for the Broadcom GMAC. This driver requires MII and PHYLIB. Signed-off-by: NJiandong Zheng <jdzheng@broadcom.com> Signed-off-by: NSteve Rae <srae@broadcom.com>
-
由 Jiandong Zheng 提交于
Enable Ethernet clock when Broadcom StarFighter2 Ethernet block (CONFIG_BCM_SF2_ETH) is enabled. Signed-off-by: NJiandong Zheng <jdzheng@broadcom.com> Signed-off-by: NSteve Rae <srae@broadcom.com>
-
由 Andre Przywara 提交于
To enable hypervisors utilizing the ARMv7 virtualization extension on the Arndale board, add the simple SMP pen address writer function and add the required configuration variables to switch all cores to HYP mode before launching the OS. This allows booting KVM and Xen directly from u-boot. Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NAndre Przywara <andre.przywara@linaro.org> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NAndre Przywara <andre.przywara@arm.com>
-
由 Sergey Kostanbaev 提交于
However ep9315 don't use interrupt vectors during startup, but _startup symbol is used inside uboot to calculate actual monitor size. Signed-off-by: NSergey Kostanbaev <sergey.kostanbaev@gmail.com> Cc: albert.u.boot@aribaud.net
-