- 11 7月, 2008 8 次提交
-
-
-
-
由 Markus Klotzbücher 提交于
This patch fixes a potentially serious issue related to USB which was discouvered by Martin Krause <martin.krause@tqs.de> and fixed for ARM920T. Martin wrote: Turn off USB to prevent the host controller from writing to the SDRAM while Linux is booting. This could happen, because the HCCA (Host Controller Communication Area) lies within the SDRAM and the host controller writes continously to this area (as busmaster!), for example to increase the HccaFrameNumber variable, which happens every 1 ms. This is a slightly modified version of the patch in order to shutdown USB when booting on all architectures. Signed-off-by: NMarkus Klotzbuecher <mk@denx.de>
-
由 Martha Marx 提交于
ADS5121 Rev 3 board is now the default config config targets are now ads5121_config Rev 3 board with PCI M41T62 on board RTC 512MB DRAM ads5121_rev2_config Rev 2 board with No PCI 256MB DRAM Signed-off-by: NMartha Marx <mmarx@silicontkx.com> Acked-by: NGrant Likely <grant.likely@secretlab.ca> Acked-by: NJohn Rigby <jrigby@freescale.com>
-
由 Martha Marx 提交于
Consolidate ADS5121 IO Pin configuration to one file board/ads5121/iopin.c. Remove pin config from cpu/mpc512x/fec.c Signed-off-by: NMartha Marx <mmarx@silicontkx.com> Acked-by: NGrant Likely <grant.likely@secretlab.ca> Acked-by: NJohn Rigby <jrigby@freescale.com>
-
由 Jon Loeliger 提交于
-
由 Christian Eggers 提交于
Only print partition for selected device if user supplied the <dev> arg with the "usb part [dev]" command. Signed-off-by: NChristian Eggers <ceggers@gmx.de> Acked-by: NMarkus Klotzbuecher <mk@denx.de>
-
由 Harald Welte 提交于
This patch fixes bugs in usbdcore*.c related to the use of devices with multiple configurations. The original code made mistakes about the meaning of configuration value and configuration index, and the resulting off-by-one errors resulted in: * SET_CONFIGURATION always selected the first configuration, no matter what wValue is being passed. * GET_DESCRIPTOR/CONFIGURATION always returned the descriptor for the first configuration (index 0). Signed-off-by: NHarald Welte <laforge@openmoko.org> Acked-by: NMarkus Klotzbuecher <mk@denx.de>
-
- 10 7月, 2008 32 次提交
-
-
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Christian Eggers 提交于
Only print partition for selected device if user supplied the <dev> arg with the "usb part [dev]" command. Signed-off-by: NChristian Eggers <ceggers@gmx.de> Acked-by: NMarkus Klotzbuecher <mk@denx.de>
-
由 Harald Welte 提交于
This patch fixes bugs in usbdcore*.c related to the use of devices with multiple configurations. The original code made mistakes about the meaning of configuration value and configuration index, and the resulting off-by-one errors resulted in: * SET_CONFIGURATION always selected the first configuration, no matter what wValue is being passed. * GET_DESCRIPTOR/CONFIGURATION always returned the descriptor for the first configuration (index 0). Signed-off-by: NHarald Welte <laforge@openmoko.org> Acked-by: NMarkus Klotzbuecher <mk@denx.de>
-
-
由 Stefan Roese 提交于
This patch fixes NAND related printf format warning. Those warnings are now visible since patch dc4b0b38 [Fix printf errors.] by Andrew Klossner has been applied. Thanks, this is really helpful. Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Stefan Roese 提交于
Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Stefan Roese 提交于
This patch moves the check, if a device should be skipped in PCI PNP configuration into the function pci_skip_dev(). This function is defined as weak so that it can be overwritten by a platform specific one if needed. The check if the device should get printed in the PCI summary upon bootup (when CONFIG_PCI_SCAN_SHOW is defined) is moved to the function pci_print_dev() which is also defined as weak too. Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Stefan Roese 提交于
This patch fixes ppc4xx related printf format warning. Those warnings are now visible since patch dc4b0b38 [Fix printf errors.] by Andrew Klossner has been applied. Thanks, this is really helpful. Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Stefan Roese 提交于
Newer PPC's like 440SPe, 460EX/GT can be equipped with more than 2GB of SDRAM. To support such configurations, we "only" map the first 2GB via the TLB's. We need some free virtual address space for the remaining peripherals like, SoC devices, FLASH etc. Note that ECC is currently not supported on configurations with more than 2GB SDRAM. This is because we only map the first 2GB on such systems, and therefore the ECC parity byte of the remaining area can't be written. Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Larry Johnson 提交于
Signed-off-by: NLarry Johnson <lrj@acm.org> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Larry Johnson 提交于
Signed-off-by: NLarry Johnson <lrj@acm.org> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Stefan Roese 提交于
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
-
由 Paul Gortmaker 提交于
This PCI-X e1000 variant works by just adding in the correct PCI IDs in the appropriate places. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Daniel Hellstrom 提交于
(introduced by commit 391fd93a) This patch makes SPARC targets build again. It is caused by phys_addr_t and phys_size_t being defined in the wrong header file. include/lmb.h need those typedefs to build. Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com>
-
由 Marcel Ziswiler 提交于
Signed-off-by: NMarcel Ziswiler <marcel@ziswiler.com>
-
由 Marcel Ziswiler 提交于
Signed-off-by: NMarcel Ziswiler <marcel@ziswiler.com>
-
由 Hugo Villeneuve 提交于
Round the serial port clock divisor value returned by calc_divisor(). Signed-off-by: NHugo Villeneuve <hugo.villeneuve@lyrtech.com> Signed-off-by: NJohn Roberts <john.roberts@pwav.com>
-
由 Scott Wood 提交于
Some macros such as NAND_CTL_SETALE conflict between current and legacy NAND, being defined by the subsystem in the former case and the board config file in the latter. Signed-off-by: NScott Wood <scottwood@freescale.com>
-
由 Hugo Villeneuve 提交于
ARM: Fix for incorrect version of patch applied when adding support for the Lyrtech SFF-SDR board. Signed-off-by: NHugo Villeneuve <hugo.villeneuve@lyrtech.com> Signed-off-by: NPhilip Balister, OpenSDR <philip@opensdr.com>
-
由 Kyungmin Park 提交于
Remove useless print message at apollon Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
由 Andy Fleming 提交于
The LMB code now uses phys_addr_t and phys_size_t. Also, there were a couple of casting problems in the bootm code that called the LMB functions. Signed-off-by: NAndy Fleming <afleming@freescale.com>
-
由 Kumar Gala 提交于
gcc-4.3.x generates the following: bootm.c: In function 'do_bootm_linux': bootm.c:208: warning: cast from pointer to integer of different size bootm.c:215: warning: cast from pointer to integer of different size Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Harald Welte 提交于
common/env_common.c (default_env): new function that resets the environment to the default value common/env_common.c (env_relocate): use default_env instead of own copy common/env_nand.c (env_relocate_spec): use default_env instead of own copy include/environment.h: added default_env prototype Signed-off-by: NWerner Almesberger <werner@openmoko.org> Signed-off-by: NHarald Welte <laforge@openmoko.org>
-
由 Marcel Ziswiler 提交于
The writeenv() and readenv() calls introduced by the recently added bad block management for environment variables were missing casts therefore producing compile time warnings. While at it fixing some typo in a comment and indentation. Signed-off-by: NMarcel Ziswiler <marcel@ziswiler.com> Signed-off-by: NScott Wood <scottwood@freescale.com>
-
由 Scott Wood 提交于
This is particularly problematic now that non-NAND-specific code is including <nand.h>, and thus all debugging code is being compiled regardless of whether it was requested, as reported by Scott McNutt <smcnutt@psyent.com>. Signed-off-by: NScott Wood <scottwood@freescale.com>
-
由 Haavard Skinnemoen 提交于
This makes it easier to use the driver on other platforms. Signed-off-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com> Acked-by: NJean-Chritophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
由 Haavard Skinnemoen 提交于
After we move the atmel_mci driver into drivers/mmc, we can't select it with CONFIG_MMC anymore. Introduce a new symbol specifically for this driver so that there's no ambiguity. Signed-off-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com> Acked-by: NJean-Chritophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
由 Haavard Skinnemoen 提交于
In order to consolidate more of the various MMC drivers around the tree, we must first have a common place to put them. Signed-off-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com> Acked-by: NJean-Chritophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
由 Joakim Tjernlund 提交于
This avoids an early global data reference. Signed-off-by: NJoakim Tjernlund <Joakim.Tjernlund@transmode.se>
-