- 09 9月, 2008 26 次提交
-
-
由 Wolfgang Denk 提交于
Several source files need to be compiled and linked when one or more config options are selected. To allow for easy selection in the Makefiles yet to avoild multiple compilation (which costs build time) and especially multiple linking (which causes errors), we use "COBJS = $(sort COBJS-y)" which eliminates duplicates. By courtesy of Detlev Zundel who suggested this approach. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Andreas Engel 提交于
Signed-off-by: NAndreas Engel <andreas.engel@ericsson.com>
-
由 Andreas Engel 提交于
They only differ in the init function. This also adds the missing watchdog support for the PL011. Signed-off-by: NAndreas Engel <andreas.engel@ericsson.com>
-
由 Ricardo Ribalda Delgado 提交于
SREC files do not need gap fill: The load address is specified in the file. On the other hand, it can't be avoided in a .bin object. It has no information about memory location. Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@uam.es>
-
由 Markus Heidelberg 提交于
Signed-off-by: NMarkus Heidelberg <markus.heidelberg@web.de>
-
由 Graeme Russ 提交于
Attempt to bring i386 / sc520 inline with master Signed-off-by: NGraeme Russ <graeme.russ@gmail.com>
-
由 Guennadi Liakhovetski 提交于
Add support for environment in NAND with automatic NOR / NAND recognition, including unaligned environment, bad-block skipping, redundant environment copy. Signed-off-by: NGuennadi Liakhovetski <lg@denx.de>
-
由 Matthias Fuchs 提交于
Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd-electronics.com> Acked-by: NStefan Roese <sr@denx.de>
-
由 Sergei Poselenov 提交于
Signed-off-by: NSergei Poselenov <sposelenov@emcraft.com>
-
由 Anatolij Gustschin 提交于
This patch adds Lime GDC support together with support for the PWM backlight control through the w83782d chip. The reset pin of the latter is attached to GPIO, so we need to reset it in early_board_init_r. Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
由 Detlev Zundel 提交于
- Update the local bus ranges in the FDT for Linux for the various devices connected to the local bus via chip-select. - Set the LCRR_DBYP bit in the LCRR for local bus frequencies lower than 66 MHz and uses I/O accessor functions consequently. - UPM data update. - Update of default environment and configuration. Use I2C multibus as we do have two I2C buses. Also enable sdram and ext2 commands. Signed-off-by: NWolfgang Grandegger <wg@grandegger.com> Signed-off-by: NSergei Poselenov <sposelenov@emcraft.com> Signed-off-by: NDetlev Zundel <dzu@denx.de>
-
由 Timur Tabi 提交于
The new sys_eeprom.c supports both the old CCID EEPROM format and the new NXID format, and so it obsoletes board/freescale/common/cds_eeprom.c. Freescale 86xx boards already use sys_eeprom.c, so this patch migrates the remaining Freescale 85xx boards to use it as well. cds_eeprom.c is deleted. Signed-off-by: NTimur Tabi <timur@freescale.com>
-
由 Wolfgang Denk 提交于
This allows to use show_activity() without having to define an empty board_show_activity() function. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
git://git.denx.de/u-boot-ppc4xx由 Wolfgang Denk 提交于
Conflicts: Makefile Signed-off-by: NWolfgang Denk <wd@denx.de>
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
由 Sergei Poselenov 提交于
This patch fixes warnings like this: start.S:0: warning: target CPU does not support interworking which come from some ARM cross compilers and are caused by hard-coded (with "--with-cpu=arm9" configuration option) ARM targets (which support ARM Thumb instructions), while the ARM target selected from the command line (with "-march=armv4") doesn't support Thumb instructions. This warning is issued by the compiler regardless of the real use of the Thumb instructions in code. To fix this problem, we use options according to compiler version being used. Signed-off-by: NSergei Poselenov <sposelenov@emcraft.com> Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Sergei Poselenov 提交于
Signed-off-by: NSergei Poselenov <sposelenov@emcraft.com> Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
bootm.c:128: warning: label 'error' defined but not used bootm.c:65: warning: unused variable 'ret' Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
missing doc_probe() prototype. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
- 08 9月, 2008 8 次提交
-
-
由 Stefan Roese 提交于
This patch moves some 4xx specific prototypes out of include common.h to a ppc4xx specific header. Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Stefan Roese 提交于
-
由 Matthias Fuchs 提交于
This patch add FDT support and command line editing capabilities for CPCI405 and CPCI405AB boards. Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd-electronics.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Matthias Fuchs 提交于
Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd-electronics.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Matthias Fuchs 提交于
This patch replaces the BOARD_REVISION variable in include/config.mk by a using a temporary include file in the platform directory. The former way does not work anymore and the latter is also used by some other boards. Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd-electronics.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Stefan Roese 提交于
Since this define is only used on one board that was never really in production, removing this compile time option doesn't hurt and makes the code more readable. Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Stefan Roese 提交于
This patch fixes a compilation warning for the PIP405 board. It moves the #ifndef CONFIG_CS8952_PHY define a little so that the warning doesn't occur anymore. I am a little unsure if this #ifdef is at the correct place now or if it could be removed completely. This needs to get tested on the PIP405 board. Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Stefan Roese 提交于
Signed-off-by: NStefan Roese <sr@denx.de>
-
- 07 9月, 2008 6 次提交
-
-
由 Kumar Gala 提交于
ctrl_regs.c: In function 'compute_fsl_memctl_config_regs': ctrl_regs.c:523: warning: 'caslat' may be used uninitialized in this function ctrl_regs.c:523: note: 'caslat' was declared here Add a warning in DDR1 case if cas_latency isn't a value we know about. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
由 Shinya Kuribayashi 提交于
Signed-off-by: NShinya Kuribayashi <skuribay@ruby.dti.ne.jp>
-
由 Kumar Gala 提交于
Adds returning an error from the ramdisk detection code if its not a real ramdisk (invalid). There is no reason we can't just return back to the console if we detect an invalid ramdisk or CRC error. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Anatolij Gustschin 提交于
This patch adds bootm_start() return value check. If error status is returned, we do not proceed further to prevent board reset or crash as we still can recover at this point. Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-