Update the anomaly lists to match latest anomaly sheets.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Regression since merge window after 2009.01
Signed-off-by: NRemy Bohmer <linux@bohmer.net>

Somehow I missed the real driver part in my last patch version. This patch
now adds the driver.
Signed-off-by: NStefan Roese <sr@denx.de>
Signed-off-by: NRemy Bohmer <linux@bohmer.net>

This is a port of the Linux Blackfin on-chip SDH driver to U-Boot.
Signed-off-by: NCliff Cai <cliff.cai@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Knowing the booting source of the part is useful, especially when the part
can switch dynamically between sources.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Set the default CONFIG_ENV_SPI_CS value to match the SPI CS that is used by
the Blackfin on-chip bootrom to boot out of SPI flash.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Some people need to access port I, so make sure the pins are defined.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

This is a port of the Linux Blackfin on-chip ATAPI driver to U-Boot.
Signed-off-by: NSonic Zhang <Sonic.Zhang@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

This is a port of the Linux Blackfin on-chip NFC driver to U-Boot.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Use the -mno-fdpic flag so that any Blackfin toolchain can be used to build
up u-boot, including ones that output FDPIC ELF by default.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

The EBIU defines for EBSZ 256/512 were incorrect.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Rather than using 8bit transfers for everything, use 8/16/32 bit transfers
as usable with the source/destination addresses and the count size.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

The performance difference from doing an 8 bit DMA memcpy vs an optimized
core memcpy can be pretty big when you add in the overhead of setting up the
MDMA registers, cache flushes, etc...  So only use dma_memcpy() when we
actually require it.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

We have to make sure the DMA channel is actually disabled in hardware before
attempting to reprogram it.  Otherwise the new settings are ignored and we
end up with random hangs/failures.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Take the cache flush functions from the kernel as they use hardware loops in
order to get optimal performance.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

For systems with CONFIG_NET_MULTI disabled, bi_enetaddr does not get setup
based on $ethaddr, so set it up.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Calculating the clocks requires a bit of calls to gcc math functions, so
cache the values after the first run since they'll most likely never
change once U-Boot is up and running.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Start building all Blackfin boards with -ffunction-sections/-fdata-sections
and linking with --gc-sections.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NMike Frysinger <vapier@gentoo.org>

This fills out the SPI backend for the Blackfin on-chip SPI peripheral.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Save some time by using CONFIG_POST in the Makefile rather than C files.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Redo how pointers are managed to get rid of ugly casts and strict pointer
aliasing issues that are highlighted by gcc 4.3.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Acked-by: NBen Warren <biggerbadderben@gmail.com>

No point in having a Blackfin-specific define "CONFIG_BFIN_MAC_RMII" that
does exactly the same thing as common "CONFIG_RMII".
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Acked-by: NBen Warren <biggerbadderben@gmail.com>

Rather then defining our own DEBUGF(), just use the common debug().
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Acked-by: NBen Warren <biggerbadderben@gmail.com>

Rather than having the on-chip MAC hardcoded to phy address 1 and a speed
of 2.5mhz, use these as defaults if the board doesn't specify otherwise.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Acked-by: NBen Warren <biggerbadderben@gmail.com>

Cleanup and rewrite the MII/PHY related functions so that we can reuse the
existing common linux/miiphy.h code and hook into the `mii` command.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Acked-by: NBen Warren <biggerbadderben@gmail.com>

Rather than hardcoding MDCDIV to 24 (which is correct for ~125mhz SCLK),
use the real algorithm so it gets set correctly regardless of SCLK.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Acked-by: NBen Warren <biggerbadderben@gmail.com>

Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

need by arm-elf toolchains and no impact on the arm-linux one
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

instead the board will have to load it from flash or ram
which will be specified by npe_ucode env var
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>