- 05 9月, 2014 1 次提交
-
-
由 Ajay Kumar 提交于
On Exynos5420 and newer versions, the FIMD sysmmus are in "on state" by default. We have to disable them in order to make FIMD DMA work. This patch adds the required framework to exynos_fimd driver, and disables FIMD sysmmu on Exynos5420. Signed-off-by: NAjay Kumar <ajaykumar.rs@samsung.com> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
- 23 6月, 2014 1 次提交
-
-
由 Akshay Saraswat 提交于
While the Exynos5420 chip is used in both Smdk5420 and in the Peach-Pit line of devices, there could be other boards using the same chip, so a common configuration file is being added (exynos5420.h) as well as two common device tree files (exynos54xx.dtsi & exynos5420.dtsi). The peach board as declared in boards.cfg is a copy of smdk5420 declaration. The configuration files are similar, but define different default device trees, console serial ports and prompts. The device tree files for smdk5420 and peach-pit inherit from the same common file. Signed-off-by: NVadim Bendebury <vbendeb@chromium.org> Signed-off-by: NAkshay Saraswat <akshay.s@samsung.com> Acked-by: NSimon Glass <sjg@chromium.org> Tested-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
- 20 2月, 2014 1 次提交
-
-
由 Masahiro Yamada 提交于
Unlike Linux Kernel, U-Boot historically had *.dts files under board/$(VENDOR)/dts/ and *.dtsi files under arch/$(ARCH)/dts/. I think arch/$(ARCH)/dts dicretory is a better location to store both *.dts and *.dtsi files. For example, before this commit, board/xilinx/dts directory had both Microblaze dts (microblaze-generic.dts) and ARM dts (zynq-*.dts), which are totally unrelated. This commit moves *.dts to arch/$(ARCH)/dts/ directories, allowing us to describe nicely mutiple DTBs generation in the next commit. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
- 30 12月, 2013 1 次提交
-
-
由 Rajeshwari Birje 提交于
This patch adds dts support for SMDK5420. exynos5.dtsi created is a common file which has the nodes common to both 5420 and 5250. Signed-off-by: NAkshay Saraswat <akshay.s@samsung.com> Signed-off-by: NRajeshwari S Shinde <rajeshwari.s@samsung.com> Acked-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
- 21 10月, 2013 1 次提交
-
-
由 Julius Werner 提交于
This patch adds a new samsung,vbus-gpio parameter to the device tree, in preparation of replacing the currently hardcoded VBUS GPIO mechanism in exynos5-dt.c with a device tree controlled solution, just as it already exists in the Linux kernel. Signed-off-by: NJulius Werner <jwerner@chromium.org> Signed-off-by: NVivek Gautam <gautam.vivek@samsung.com> Cc: Simon Glass <sjg@chromium.org> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Marek Vasut <marex@denx.de>
-
- 24 9月, 2013 1 次提交
-
-
由 Dani Krishna Mohan 提交于
This patch enables default I2S0 channel.And I2S platform parameter has been moved to a common file viz exynos5.dtsi. Signed-off-by: NDani Krishna Mohan <krishna.md@samsung.com>
-
- 03 8月, 2013 1 次提交
-
-
由 Stephen Warren 提交于
Now that we assume dtc supports the -i option, we don't need to use ARCH_CPU_DTS in *.dts{,i}; we simply specify the include filename directly, and dtc will find it. Signed-off-by: NStephen Warren <swarren@nvidia.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
- 24 6月, 2013 1 次提交
-
-
由 Rajeshwari Shinde 提交于
This patch adds the device node required for serial driver Signed-off-by: NAbhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: NRajeshwari Shinde <rajeshwari.s@samsung.com> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
- 13 6月, 2013 1 次提交
-
-
由 Amar 提交于
This patch adds DWMMC device node data for exynos5. This patch also adds binding file for DWMMC device node. Signed-off-by: NVivek Gautam <gautam.vivek@samsung.com> Signed-off-by: NAmar <amarendra.xt@samsung.com> Acked-by: NJaehoon Chung <jh80.chung@samsung.com> Acked-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
- 27 3月, 2013 2 次提交
-
-
由 Ajay Kumar 提交于
Add DT bindings for DP supporting an eDP panel of size 2560x1600. Signed-off-by: NAjay Kumar <ajaykumar.rs@samsung.com> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Ajay Kumar 提交于
Add DT bindings for FIMD supporting an eDP panel of size 2560x1600. Signed-off-by: NAjay Kumar <ajaykumar.rs@samsung.com> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
- 12 3月, 2013 2 次提交
-
-
由 Akshay Saraswat 提交于
This adds a member to TMU FDT node for providing hardware tripping temperature threshold. Signed-off-by: NAkshay Saraswat <akshay.s@samsung.com> Acked-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Akshay Saraswat 提交于
Fdt entry for Exynos TMU driver specific pre-defined values used for calibration of current temperature and defining threshold values. Signed-off-by: NAkshay Saraswat <akshay.s@samsung.com> Acked-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
- 10 1月, 2013 1 次提交
-
-
由 Rajeshwari Shinde 提交于
Add device node for MAX77686 Signed-off-by: NRajeshwari Shinde <rajeshwari.s@samsung.com> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
- 08 1月, 2013 3 次提交
-
-
由 Rajeshwari Shinde 提交于
This patch adds aliases for SPI. Signed-off-by: NRajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Rajeshwari Shinde 提交于
Adds sound and codec device node parameters Signed-off-by: NR. Chandrasekar <rcsekar@samsung.com> Signed-off-by: NRajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Rajeshwari Shinde 提交于
This patch adds aliases for I2C. Signed-off-by: NRajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: NSimon Glass <sjg@chromium.org> Acked-by: NHeiko Schocher <hs@denx.de> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
- 26 12月, 2012 1 次提交
-
-
由 Hatim RV 提交于
This patch adds initial dts file for EXYNOS5250 SoC. This dts file currently include only ethernet devices and properties. More devices to be added in subsequent patches. Also add the dts file for SMDK5250 board which uses the EXYNOS5250 dts file. Signed-off-by: NHatim Ali <hatim.rv@samsung.com> Acked-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-