- 21 5月, 2008 5 次提交
-
-
由 York Sun 提交于
Reuse the existing DIU driver in board/freescale/common. Signed-off-by: NYork Sun <yorksun@freescale.com>
-
由 York Sun 提交于
Add DIU and cfb console support to FSL 5121ADS board. Use #define CONFIG_VIDEO in config file to enable fb console. Signed-off-by: NYork Sun <yorksun@freescale.com>
-
由 York Sun 提交于
Remove DPRINTF macro and replace it with generic debug macro. Signed-off-by: NYork Sun <yorksun@freescale.com>
-
由 York Sun 提交于
The clock divider has different format in 5121 and 8610. This patch moves it to board specific code. Signed-off-by: NYork Sun <yorksun@freescale.com>
-
由 Wolfgang Denk 提交于
This commit gets rid of a huge amount of silly white-space issues. Especially, all sequences of SPACEs followed by TAB characters get removed (unless they appear in print statements). Also remove all embedded "vim:" and "vi:" statements which hide indentation problems. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
- 20 5月, 2008 2 次提交
-
-
由 Hebbar 提交于
Signed off by: Gururaja Hebbar <gururajakr@sanyo.co.in>
-
由 York Sun 提交于
Change LCRR clock ratio from 2 to 4 to commodate VSC7385. Correct TSEC1 vs TSEC2 assignment. Define ETHADDR and ETH1ADDR always. Signed-off-by: NYork Sun <yorksun@freescale.com> Signed-off-by: NTimur Tabi <timur@freescale.com>
-
- 19 5月, 2008 9 次提交
-
-
由 Wolfgang Denk 提交于
Update CHANGELOG for release. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
-
由 Stefan Roese 提交于
When SATA is selected (via jumper J6) we need to disable the first PCIe node in the device tree, so that Linux doesn't initialize it. Otherwise the Linux SATA driver will fail to detect the devices. The same goes the other way around too. So if PCIe is selected we need to disable the SATA node in the device tree. This is because PCIe port 0 and SATA on 460EX share the same pins (multiplexed) and we have to configure in U-Boot which peripheral is enabled. Signed-off-by: NStefan Roese <sr@denx.de>
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
flash.c:593: warning: dereferencing type-punned pointer will break strict-aliasing rules flash.c:398: error: label at end of compound statement Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
- 15 5月, 2008 2 次提交
-
-
由 Wolfgang Denk 提交于
...and add to MAKEALL script Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
env_get_char is not a function, but a pointer to one. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
- 14 5月, 2008 9 次提交
-
-
-
由 Wolfgang Denk 提交于
Several board/<...>/config.mk files include dynamically built (by the Makefile) config files but used the wrong file name of $(TOPDIR)/board/$(BOARDDIR)/config.tmp instead if the correct $(OBJTREE)/board/$(BOARDDIR)/config.tmp The bug is nasty because the build result is correct for the (normal) in-tree builds, and because 'sinclude' is used no errors get raised even for out-of-tree build tests. But out-of-tree builds use an incomplete and thus usually incorrect configuration... Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Stefan Roese 提交于
This patch fixes the canyonlands config.mk file to enable correct out-of-tree builds. Thanks to Wolfgang Denk for spotting this. Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Stefan Roese 提交于
Canyonlands has a file ddr2_fixed.c which needs special treatment when building in separate directory. It has to be linked to build directory otherwise it is not seen. Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Stefan Roese 提交于
Canyonlands has a file ddr2_fixed.c which needs special treatment when building in separate directory. It has to be linked to build directory otherwise it is not seen. Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Stefan Roese 提交于
Signed-off-by: NStefan Roese <sr@denx.de>
-
- 12 5月, 2008 6 次提交
-
-
由 Wolfgang Denk 提交于
This reverts commit 55774b51 which broke many PowerPC boards.
-
由 Wolfgang Denk 提交于
-
由 Wolfgang Denk 提交于
This reverts commit 1b5605ca which breaks building on all PPC boards that don't use a log buffer.
-
由 Nick Spence 提交于
Calculation of tail was incorrect when size % 4 == 0. New code removes the conditional and does the same thing but with arithmetic Signed-off-by: NNick Spence <nick.spence@freescale.com>
-
由 Wolfgang Denk 提交于
This reverts commit c0559be3 which is known to break booting from dataflash and NAND.
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
- 10 5月, 2008 7 次提交
-
-
由 Markus Klotzbücher 提交于
When using dhcp/bootp the "netmask" environment variable is not set because CONFIG_BOOTP_SUBNETMASK is not defined. But usually this is desireable, so the following patch adds this this option to the board config. Signed-off-by: NMarkus Klotzbuecher <mk@denx.de> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Stefan Roese 提交于
This patch reworks the default environment on Makalu. Now "net_nfs" for example uses the device-tree style booting formerly know as "net_nfs_fdt". Also the addresses in RAM were changed because of the new image booting support, which check for image overwriting. So the addresses needed to get adjusted. Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Becky Bruce 提交于
map_physmem currently generates a warning when CONFIG_PHYS_64BIT is enabled. This quiets the warning. Signed-off-by: NBecky Bruce <Becky.Bruce@freescale.com>
-
由 Becky Bruce 提交于
Physical addrs need to be represented by phys_addr_t, not unsigned long. Otherwise, systems that use CONFIG_PHYS_64BIT are going to fail mightily. Signed-off-by: NBecky Bruce <becky.bruce@freescale.com>
-
由 Nick Spence 提交于
This patch enables legacy multi-type images containing only a Linux kernel and root file system to be loaded, maintaining compatibility with previous versions of u-boot. This is required when using old image files such as a Linux 2.4 kernel / filesystem. Signed-off-by: NNick Spence <nick.spence@freescale.com> Acked-by: NBartlomiej Sieka <tur@semihalf.com>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-