Clean up added ehci-omap.c and make it generic for re-use across
omap-soc having same ehci ip block. Also pass the modes to be configured
from board file and configure the ports accordingly. All usb layers
are not cache aligned, till then keep cache off for usb ops as ehci will use
internally dma for all usb ops.

* Add a generic common header ehci-omap.h having common ip block
  data and reg shifts.
* Rename and modify ehci-omap3 to ehci.h retain only conflicting
  sysc reg shifts remove others and move to common header file.
* pass the board data for beagle/panda accordinly to use
  ehci ports.
Acked-by: NIgor Grinberg <grinberg@compulab.co.il>
Signed-off-by: NGovindraj.R <govindraj.raja@ti.com>

Taken from Beagle code. Tested on mcx board (AM3517-based).
Signed-off-by: NIlya Yanok <yanok@emcraft.com>
Tested-by: NStefano Babic <sbabic@denx.de>

Based on discussion from this thread [1].
Adding omap-view port that helps us in using the generic ulpi
framework for any ulpi phy ops using the INSNREG05_ULPI viewport
reg available on omap platform.

Currently ehci ports are available on omap3/4 platforms so enable the same
for beagle and panda, patch is tested on the same boards.

Thanks to Igor Grinberg <grinberg@compulab.co.il> for reviewing the
omap-ehci patches and suggesting this approach.

[1]: http://www.mail-archive.com/u-boot@lists.denx.de/msg76076.htmlTested-by: NStefano Babic <sbabic@denx.de>
Acked-by: NIgor Grinberg <grinberg@compulab.co.il>
Signed-off-by: NGovindraj.R <govindraj.raja@ti.com>

Extend the existing ulpi viewport framework
to pass the port number information for any ulpi
ops. Fix the usage of ulpi api's accordingly.
Tested-by: NStefano Babic <sbabic@denx.de>
Acked-by: NIgor Grinberg <grinberg@compulab.co.il>
Signed-off-by: NGovindraj.R <govindraj.raja@ti.com>

Signed-off-by: NAmit Virdi <amit.virdi@st.com>
Acked-by: NStefan Roese <sr@denx.de>

This patch enable support for SMC911X based ethernet device.
Signed-off-by: NChander Kashyap <chander.kashyap@linaro.org>
Acked-by: NMike Frysinger <vapier@gentoo.org>
Acked-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>

This patch adds support for MMC SPL booting.
Signed-off-by: NChander Kashyap <chander.kashyap@linaro.org>
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>

SMDK5250 board is based on Samsungs EXYNOS5250 SoC.
Signed-off-by: NChander Kashyap <chander.kashyap@linaro.org>
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>

Samsung's ARM Cortex-A15 based SoCs are known as Exynos5 series of
SoCs. This patch adds the support for Exynos5.
Signed-off-by: NChander Kashyap <chander.kashyap@linaro.org>
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>

CONFIG_SYS_CLK_FREQ_C210 macro giving notion of S5PC2XX (Exynos4)
architecture. Replace CONFIG_SYS_CLK_FREQ_C210 with CONFIG_SYS_CLK_FREQ
to make it generic for exynos architecture.
Signed-off-by: NChander Kashyap <chander.kashyap@linaro.org>
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>

Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
Signed-off-by: NHeungJun, Kim <riverful.kim@samsung.com>
Cc: Chander Kashyap <chander.kashyap@linaro.org>

Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Cc: HeungJun, Kim <riverful.kim@samsung.com>

This patch adds support the generic watchdog timer for s5pc1xx and exynos4
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Cc: HeungJun, Kim <riverful.kim@samsung.com>

Since MACH_TYPE_ORIGEN is updated on mach-types,
remove the MACH_TYPE_ORIGEN on config file.
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
Cc: Chander Kashyap <chander.kashyap@linaro.org>

This patch adds support for Samsung TRATS board
Signed-off-by: NHeungJun, Kim <riverful.kim@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>

This patch adds power.h and SAMSUNG_BASE() macro for using Exynos4 power.
Signed-off-by: NHeungJun, Kim <riverful.kim@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>

This patch add watchdog.h for Exynos4
Signed-off-by: NHeungJun, Kim <riverful.kim@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>

Signed-off-by: NChander Kashyap <chander.kashyap@linaro.org>
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>

Earliar ARM clock frequency was calculated by:
MOUTAPLL/(DIVAPLL + 1) which is actually returning SCLKAPLL.
It is fixed by calculating it as follows:
ARMCLK=MOUTCORE / (DIVCORE + 1) / (DIVCORE2 + 1)
Signed-off-by: NChander Kashyap <chander.kashyap@linaro.org>
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>

Add TCMPB3 field in pwm structure, earliar this was res1.
Signed-off-by: NChander Kashyap <chander.kashyap@linaro.org>
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>

Signed-off-by: NHolger Brunck <holger.brunck@keymile.com>
Cc: Valentin Longchamp <valentin.longchamp@keymile.com>
Cc: Prafulla Wadaskar <prafulla@marvell.com>
Acked-by: NHeiko Schocher <hs@denx.de>

We don't need 3us delay for our i2c bus. Decrease it to 1us.
It would also be possible to use 100ns in the future, but
currently kirkwood has no ndelay implementation.
Signed-off-by: NHolger Brunck <holger.brunck@keymile.com>
Cc: Valentin Longchamp <valentin.longchamp@keymile.com>
Cc: Prafulla Wadaskar <prafulla@marvell.com>
Cc: Heiko Schocher <hs@denx.de>
Acked-by: NHeiko Schocher <hs@denx.de>

after http://patchwork.ozlabs.org/patch/136415/ was applied. All Marvell
build fails with below error

common/libcommon.o: In function `cread_line':
/home/uboot/src/u-boot-arm/common/main.c:717: undefined reference to `get_ticks'
/home/uboot/src/u-boot-arm/common/main.c:717: undefined reference to `get_tbclk'
/home/uboot/src/u-boot-arm/common/main.c:720: undefined reference to `get_ticks'

The same is fixed for Kirkwood, ARMADA100, pantheon and orion5x SoCs
Signed-off-by: NPrafulla Wadaskar <prafulla@marvell.com>

This patch adds support for D-Link DNS-325 ShareCenter NAS.
Signed-off-by: NStefan Herbrechtsmeier <stefan@code.herbrechtsmeier.net>
Cc: prafulla@marvell.com
Cc: albert.u.boot@aribaud.net

The decompressor expects the L2 cache to be disabled. This fixes booting
some kernels, which have CONFIG_ARM_PATCH_PHYS_VIRT enabled.
Signed-off-by: NMichael Walle <michael@walle.cc>
Acked-by: NPrafulla Wadaskar <prafulla@marvell.com>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Prafulla Wadaskar <prafulla@marvell.com>
Cc: Wolfgang Denk <wd@denx.de>

Signed-off-by: NAlbert ARIBAUD <albert.u.boot@aribaud.net>

Signed-off-by: NAlbert ARIBAUD <albert.u.boot@aribaud.net>

Signed-off-by: NAlbert ARIBAUD <albert.u.boot@aribaud.net>

Signed-off-by: NAlbert ARIBAUD <albert.u.boot@aribaud.net>
Signed-off-by: NPrafulla Wadaskar <prafulla@marvell.com>

Signed-off-by: NAlbert ARIBAUD <albert.u.boot@aribaud.net>

Problem appears to have been present since day one but masked because alignment
aborts were not enabled. ca4b5580 "arm, arm926ejs: always do cpu critical
inits" turned on alignment aborts and uncovered this latent problem.
Signed-off-by: NIan Campbell <ijc@hellion.org.uk>
Acked-By: NJason Cooper <u-boot@lakedaemon.net>
Tested-By: NHolger Brunck <holger.brunck@keymile.com>
Cc: Prafulla Wadaskar <prafulla@marvell.com>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>

Signed-off-by: NDavid Mueller <d.mueller@elsoft.ch>
Acked-by: NMinkyu Kang <mk7.kang@samsung.com>

FEC does not work on the i.mx51/53evk board, it will hangup
In:    serial
Out:   serial
Err:   serial
Net:

After bisect, it due to the following commit:
be252b65 net: imx: Add multi-FEC support for imx_get_mac_from_fuse
has change the imx_get_mac_from_fuse fucntion prototype, but fail
to update i.mx5, here it does it.

After apply this patch, u-boot works again on i.mx51/53 evk boards.
Signed-off-by: NJason Liu <jason.hui@linaro.org>
Cc: Stefano Babic <sbabic@denx.de>
Acked-by: NFabio Estevam <fabio.estevam@freescale.com>
Acked-by: NStefano Babic <sbabic@denx.de>

board_mmc_init() initializes the pins of SDHC1 and
turns on V_MMC1 of the PMIC. Config adds support for EXT2
and FAT.
Signed-off-by: NHelmut Raiger <helmut.raiger@hale.at>

Add bit definitions for register 32 and 33 of Freescale MC13783.
Signed-off-by: NHelmut Raiger <helmut.raiger@hale.at>

The generic spi flash driver (drivers/mtd/spi/spi_flash.c) uses the
spi low level driver's spi_xfer() function with len=0 to deassert the
SPI flash' chip select. But the i.MX28 spi driver rejects this call
due to len=0.

This patch implements an exception for len=0 with the SPI_XFER_END
flag set. This results in an extra read with the chip select being
deasserted afterwards. There seems to be no way to deassert the signal
by hand.
Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd.eu>
Tested-by: NFabio Estevam <fabio.estevam@freescale.com>

Showing CPU frequency during boot is useful information.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Acked-by: NMarek Vasut <marek.vasut@gmail.com>
Acked-by: NStefano Babic <sbabic@denx.de>

Commit 314284b1 has
changed board_mmc_getcd() function prototype, while
mx6qarm2 has still the old one.
Signed-off-by: NStefano Babic <sbabic@denx.de>
CC: Jason Liu <jason.hui@linaro.org>
Acked-by: NDirk Behme <dirk.behme@de.bosch.com>
Acked-by: NJason Liu <jason.hui@linaro.org>
Tested-by: NJason Liu <jason.hui@linaro.org>

CONFIG_NET_MULTI is not used anymore, so remove it from board files.

Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Kumar Gala <kumar.gala@freescale.com>
Cc: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Acked-by: NTom Rini <trini@ti.com>
Acked-by: NMike Frysinger <vapier@gentoo.org>
Acked-by: NMarek Vasut <marek.vasut@gmail.com>
Acked-by: NHeiko Schocher <hs@denx.de>
Acked-by: NKumar Gala <galak@kernel.crashing.org>
Acked-by: NStefano Babic <sbabic@denx.de>
Tested-by: NMarek Vasut <marek.vasut@gmail.com>
Tested-by: NHeiko Schocher <hs@denx.de>

This patch modifies mxcmmc.c to be used
not only by i.MX27 but also by i.MX31 boards.
Both use the same SD controller, but have different
clock set-ups.
The i.MX27 imx_get_XXXclock functions are made static to
generic.c and a public mxc_get_clock() function
is provided.  Pins, base address and prototypes for
an i.MX31 specific board_init_mmc() are provided.
Some of the i.MX27 clock getters are unused and marked
as such to avoid warnings (./MAKEALL -s mx27), but
the code was left in for future use.
Signed-off-by: NHelmut Raiger <helmut.raiger@hale.at>
Acked-by: NStefano Babic <sbabic@denx.de>