Disable VIDEO config to fix DM_VIDEO conversion
deadline warning.
Signed-off-by: NAnatolij Gustschin <agust@denx.de>

Remove CONFIG_VIDEO dependency to fix board removal warnings.
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
Cc: Jens Scharsig <esw@bus-elektronik.de>

DM_VIDEO conversion deadline has passed, disable VIDEO config.
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>

DM_VIDEO conversion deadline has passed, disable VIDEO config.
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>

DM_VIDEO conversion deadline has passed, disable VIDEO config.
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
Cc: Otavio Salvador <otavio@ossystems.com.br>

DM_VIDEO conversion deadline has passed, disable VIDEO config.
Boards should convert to DM_VIDEO if they need video console
support.
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
Cc: Eugen Hristev <eugen.hristev@microchip.com>

DM_VIDEO conversion deadline has passed, disable VIDEO config.
Signed-off-by: NAnatolij Gustschin <agust@denx.de>

DM_VIDEO conversion deadline has passed, disable VIDEO config.
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
Cc: Erik van Luijk <evanluijk@interact.nl>

DM_VIDEO conversion deadline has passed, disable VIDEO config.
Signed-off-by: NAnatolij Gustschin <agust@denx.de>

DM_VIDEO conversion deadline has passed, disable VIDEO config.
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
Cc: Alison Wang <alison.wang@nxp.com>

DM_VIDEO conversion deadline has passed, disable VIDEO config.
Signed-off-by: NAnatolij Gustschin <agust@denx.de>

DM_VIDEO conversion deadline has passed, disable VIDEO config.
Signed-off-by: NAnatolij Gustschin <agust@denx.de>

The "cmd/Kconfig" has a TODO description for CMD_MISC that it should
really be named as CMD_SLEEP. Change it in the whole source tree.
Signed-off-by: NBin Meng <bin.meng@windriver.com>

add Kconfig option for pcf8563 driver and
run tools/moveconfig.py
Signed-off-by: NHeiko Schocher <hs@denx.de>
Reviewed-by: NStefan Roese <sr@denx.de>

CONFIG_{SPL,TPL}_SIZE_LIMIT are defined as hex (SPL_SIZE_LIMIT was
converted in b51882d0 ("spl: Convert CONFIG_SPL_SIZE_LIMIT to hex"), but
there are still places that reference integer values. Change those to hex
as well. Also, update the Makefile to check for 0x0 instead of 0.

This also fixes the following build error when CONFIG_SPL_SIZE_LIMIT
is set by menuconfig to 0x0:
...
spl/u-boot-spl.bin exceeds file size limit:
  limit:  0 bytes
  actual: 0x80f0 bytes
  excess: 0x80f0 bytes
Signed-off-by: NOvidiu Panait <ovidiu.panait@windriver.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

A64-Teres-I board is a laptop which comes with a builtin keyboard.
The keyboard+trackpad controller pauses for 2 seconds at a firmware
prompt before loading its HID interface.

U-Boot needs to wait equally long to reliably enable the keyboard.
Signed-off-by: NJonas Smedegaard <dr@jones.dk>
Reviewed-by: NTom Rini <trini@konsulko.com>
Series-Cc: Jagan Teki <jagan@amarulasolutions.com>
Series-Cc: Lukasz Majewski <lukma@denx.de>
Series-Cc: Andre Przywara <andre.przywara@arm.com>

Olimex OLinuXino LIME2 rev. H through L uses Micrel KSZ9031 PHY.

This enables the Micrel PHY for A20-OLinuXino-Lime2-eMMC_defconfig.
Signed-off-by: NJonas Smedegaard <dr@jones.dk>
Reviewed-by: NJagan Teki <jagan@amarulasolutions.com>

According to the devicetree and the schematic, the 3.3V power rail for
the PHY is enabled by GPIO PC16. It's wired as active-high, with a
pull-up resistor, so actually works already when the GPIO is in
High-Z state.

However we should not take any chances and explicitly set the GPIO pin
to high, to avoid accidentally losing the PHY power.
The existing MACPWR Kconfig allows to do this easily.
Signed-off-by: NAndre Przywara <andre.przywara@arm.com>
Acked-by: NMaxime Ripard <mripard@kernel.org>
Tested-by: Amit Singh Tomar <amittomer25@gmail.com> # Pine64+
Reviewed-by: NJagan Teki <jagan@amarulasolutions.com>

Activate CONFIG_CMD_ELF to accept the command "bootelf".

This patch simplifies the file stm32mp defconfig, as we have
no reason to deactivate this command.
Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: NPatrice Chotard <patrice.chotard@st.com>

Activate CONFIG_CMD_EXPORTENV to accept the command "env export".
Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: NPatrice Chotard <patrice.chotard@st.com>

Activate CONFIG_CMD_IMPORTENV to accept the command "env import".
This command is useful in script to include some variable.
Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: NPatrice Chotard <patrice.chotard@st.com>

Enable mtu3, xhci, tphy drivers.
Device mode: enable fastboot;
Host mode: enable USB, FAT commands, and fixed regulator,
mass storage drivers;
Due to device mode is enabled by default, comment out
the host mode config here.
Signed-off-by: NChunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>

Update defconfigs for using common clock framework compatible
clocks.
Signed-off-by: NClaudiu Beznea <claudiu.beznea@microchip.com>

Done with:
./tools/moveconfig.py BMP_16BPP BMP_24BPP BMP_32BPP
Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Done with:
./tools/moveconfig.py VIDEO_BMP_RLE8
Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Done with:
./tools/moveconfig.py VIDEO_BMP_GZIP

The 3 suspicious migration because CMD_BMP and SPLASH_SCREEN
are not activated in these defconfigs:
- trats_defconfig
- s5pc210_universal_defconfig
- trats2_defconfig
Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Enable WDT command for Octeon TX/TX2 boards.
Signed-off-by: NStefan Roese <sr@denx.de>
Cc: Aaron Williams <awilliams@marvell.com>
Cc: Suneel Garapati <sgarapati@marvell.com>
Cc: Chandrakala Chavva <cchavva@marvell.com>

Add PStore command to sandbox and sandbox64 defconfigs.
Add test checking:
- 'pstore display' of all records
- 'pstore display' only the 2nd dump record
- 'pstore save' of all records
Signed-off-by: NFrédéric Danis <frederic.danis@collabora.com>
[trini: Adjust to always load files from source directory]
Signed-off-by: NTom Rini <trini@konsulko.com>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Heiko Schocher <hs@denx.de>

Add initial U-Boot support for the iEi Puzzle-M801 board based on the
Marvell Armada 88F8040 SoC.

Currently supported hardware:
1x USB 3.0
4x Gigabit Ethernet
2x SFP+ (with NXP PCA9555 and NXP PCA9544)
1x SATA 3.0
1x M.2 type B
1x RJ45 UART
1x SPI flash
1x EPSON RX8010 RTC
Signed-off-by: NLuka Kovacic <luka.kovacic@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Reviewed-by: NStefan Roese <sr@denx.de>

Enable eMMC HS400 mode support on LX2160ARDB.
Signed-off-by: NYangbo Lu <yangbo.lu@nxp.com>

This enables applying DTBOs at U-Boot prompt before booting to kernel.
Signed-off-by: NVignesh Raghavendra <vigneshr@ti.com>

Rsync all defconfig files using moveconfig.py
Signed-off-by: NTom Rini <trini@konsulko.com>

CONFIG_OF_EMBED was primarily enabled to support the S10/Agilex
spl hex file requirements.  Since this option now produces a
warning during build, and the spl hex can be created using
alternate methods, CONFIG_OF_EMBED is no longer needed.
Signed-off-by: NChee Hong Ang <chee.hong.ang@intel.com>

Don't invoke 'SYSTEM_RESET' PSCI function because PSCI
function calls are not supported by u-boot running in EL3.
Signed-off-by: NChee Hong Ang <chee.hong.ang@intel.com>
Reviewed-by: NLey Foon Tan <ley.foon.tan@intel.com>

All SoCFPGA platforms (except Cyclone V) are now switching
to CONFIG_WDT (driver model for watchdog timer drivers)
from CONFIG_HW_WATCHDOG.
Signed-off-by: NChee Hong Ang <chee.hong.ang@intel.com>
Reviewed-by: NLey Foon Tan <ley.foon.tan@intel.com>

In current implementation, any exception would trigger a CPU reset.
But a bad written SPL would cause infinite loop where the system
will reload the same SPL instead of loading factory safe image.

Hence this patch is to ensure any exception will cause a hang. At this
moment, watchdog shall be triggered and Remote System Update mechanism
shall load the next production image or factory safe image.
Signed-off-by: NChin Liang See <chin.liang.see@intel.com>
Signed-off-by: NChee Hong Ang <chee.hong.ang@intel.com>
Reviewed-by: NLey Foon Tan <ley.foon.tan@intel.com>

Now that PIE works when U-Boot is started from ROM, let's enable
CONFIG_POSITION_INDEPENDENT, which allows to load U-Boot also via
ARM Trusted-Firmware's fip.bin to DRAM, without tweaking the
configuration.

To get a writable initial stack, we need to keep the fixed initial
stack pointer, which points to DRAM in our case.
Signed-off-by: NAndre Przywara <andre.przywara@arm.com>
Reviewed-by: NStephen Warren <swarren@nvidia.com>

This patch enables USB support with some helpful commands, like fs
support.
Signed-off-by: NStefan Roese <sr@denx.de>

This patch adds the board specific configuration (struct) for the
Octeon 3 EBB7304 EVK. This struct is ported from the 2013er Cavium /
Marvell U-Boot repository. Also, the Octeon RAM driver is enabled in
the board defconfig for its usage.

Tested with one and two DIMMs on the EBB7304 EVK (8 & 16 GiB).
Signed-off-by: NStefan Roese <sr@denx.de>

CONFIG_EFI_GRUB_ARM32 is only needed for architectures with caches that are
not managed via CP15 (or for some outdated buggy versions of GRUB). It
makes more sense to disable the setting per architecture than per defconfig.

Move QEMU's CONFIG_EFI_GRUB_ARM32_WORKAROUND=n from defconfig to Kconfig.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>