This converts the following to Kconfig:
   CONFIG_BOOTDELAY

Cc: Holger Brunck <holger.brunck@ch.abb.com>
Signed-off-by: NTom Rini <trini@konsulko.com>

This converts the following to Kconfig:
   CONFIG_BOOTCOUNT_ENV
   CONFIG_BOOTCOUNT_LIMIT

Cc: Anatolij Gustschin <agust@denx.de>
Signed-off-by: NTom Rini <trini@konsulko.com>

This converts the following to Kconfig:
   CONFIG_BOARD_TYPES
Signed-off-by: NTom Rini <trini@konsulko.com>

This converts the following to Kconfig:
   CONFIG_BCH
Signed-off-by: NTom Rini <trini@konsulko.com>

This converts the following to Kconfig:
   CONFIG_BOOTARGS
Signed-off-by: NTom Rini <trini@konsulko.com>

This converts the following to Kconfig:
   CONFIG_BOARD_EARLY_INIT_F
   CONFIG_BOARD_EARLY_INIT_R
Signed-off-by: NTom Rini <trini@konsulko.com>

This converts the following to Kconfig:
   CONFIG_BAUDRATE
Signed-off-by: NTom Rini <trini@konsulko.com>

This converts the following to Kconfig:
   CONFIG_AUTOBOOT_PROMPT
   CONFIG_AUTOBOOT_KEYED
   CONFIG_AUTOBOOT_STOP_STR
Signed-off-by: NTom Rini <trini@konsulko.com>

This converts the following to Kconfig:
   CONFIG_ATMEL_USART
Signed-off-by: NTom Rini <trini@konsulko.com>

This converts the following to Kconfig:
   CONFIG_ATMEL_NAND_HW_PMECC
   CONFIG_ATMEL_NAND_HWECC
   CONFIG_NAND_ATMEL
   CONFIG_PMECC_CAP
   CONFIG_PMECC_SECTOR_SIZE
Signed-off-by: NTom Rini <trini@konsulko.com>

This converts the following to Kconfig:
   CONFIG_ATMEL_HLCD
Signed-off-by: NTom Rini <trini@konsulko.com>

This converts the following to Kconfig:
   CONFIG_AT91_GPIO
Signed-off-by: NTom Rini <trini@konsulko.com>

This converts the following to Kconfig:
   CONFIG_ARM_PL180_MMCI
Signed-off-by: NTom Rini <trini@konsulko.com>

This converts the following to Kconfig:
   CONFIG_ARCH_MISC_INIT
Signed-off-by: NTom Rini <trini@konsulko.com>

This converts the following to Kconfig:
   CONFIG_AM335X_LCD
Signed-off-by: NTom Rini <trini@konsulko.com>

- Tidy up the 'bdinfo' command so that it's both consistent for all
  architectures and sharing as much code as possible.

Set this value in global_data so that it is reported correctly on x86
boards.

In fact, U-Boot allocates space for the frame buffer even though it is not
used. Then the FSP picks the address itself (e.g. 0xb0000000). So the
value set by U-Boot (high in memory with everything else that is
relocated), is not actually the correct value.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>

Update this value with the address of a video device so that it shows with
the 'bd' command.

It would be better to obtain the address from the uclass by looking in
struct video_uc_platdata for each device. We can move over to that once
DM_VIDEO migration is complete.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>

Update the comment at the top of the file to indicate what this file does.
Also drop the line at the bottom and an unnecessary header include.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>

We don't have an easy way to share these three lines of code with two
architectures. We also want to make it clear that this code is actually
arch-specific.

So just duplicate it in each arch-specific file.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
Reviewed-by: NStefan Roese <sr@denx.de>

We don't really want to have m68k-specific code in a generic file. Create
a new arch-specific function to hold it, and move it into that.

Make the function weak so that any arch can implement it.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
Tested-by: NAngelo Dureghello <angelo.dureghello@timesys.com>
Tested-by: NAngelo Dureghello <angelo.dureghello@timesys.com>

We don't really want to have PPC-specific code in a generic file. Create
a new arch-specific function to hold it, and move it into that.

Make the function weak so that any arch can implement it.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
Reviewed-by: NStefan Roese <sr@denx.de>

We don't really want to have ARM-specific code in a generic file. Create
a new arch-specific function to hold it, and move it into that.

Make the function weak so that any arch can implement it.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>

At present the functions to print a number and a frequency are static. We
want to move some of the code in here to an arch-specific file. For
consistency that code should use these same functions. So export them with
an appropriate name.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>

This function only has two lines of code now, so inline it.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>

This code pre-dates driver model and the migration date is nearly upon us.
Pare the print_eths() function down and enable it for driver model, since
it works correctly.

The IP address is already printed in print_eth_ip_addr() so we can remove
that.

Since this results in a one-line print_eths() function, inline it.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>

These config options have not been migrated to Kconfig. This should be
handled using driver model, iterating over the available Ethernet devices.
For now, remove the code.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
Reviewed-by: NStefan Roese <sr@denx.de>

These values were 'old' in 2013 so it should be safe to remove them. They
are never set in U-Boot anyway, so the values will always be zero.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
Reviewed-by: NStefan Roese <sr@denx.de>

This function only has one line of code in it so inline it.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>

This function only has three lines of code in it so inline it. This helps
to put all the code in one place for future partitioning.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>

This function only has one line of code in it so inline it.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>

It isn't worth having arch-specific code for such minor output
differences. In fact it is better if all archs are consistent.

Drop the arch-specific code in print_bi_mem() and inline it to avoid a
two-line function.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
Acked-by: NAlexey Brodkin <abrodkin@synopsys.com>

This function outputs the same basic info. Since the baud rate is commonly
115200 these is often no difference. Drop the arch-specific code and
inline it to avoid a one-line function.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
Reviewed-by: NStefan Roese <sr@denx.de>

Everything in this function is standard now so it serves no purpose. Move
it into the generic do_bdinfo() function.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>

This serves no purpose since the compiler will inline the functions
automatically. Drop use of inline in this file.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>

The differences these architectures have are minor and not worth the extra
code. Use the generic version always.

Tidy up the code style by removing unnecessary tabs.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>

Some of these are not needed now. Drop them to avoid cluttering the code.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>

Now that all architectures are using the generic do_bdinfo(), drop the
option to not use it. When new architectures are added, they will get at
least some useful information from the generic implementation.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>

There is nothing new in the arc 'bd' command beyond what is already there.
Switch it over to use the generic code.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Acked-by: NAlexey Brodkin <abrodkin@synopsys.com>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>

Unfortunately ARM has a lot of special stuff. Move it into the generic
function for now, so we can have it all in one place.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>