- 31 1月, 2018 1 次提交
-
-
由 Derald D. Woods 提交于
This converts the following to Kconfig: CONFIG_SYS_BOOT_GET_CMDLINE CONFIG_SYS_BOOT_GET_KBD Signed-off-by: NDerald D. Woods <woods.technical@gmail.com>
-
- 12 1月, 2018 1 次提交
-
-
由 Rick Chen 提交于
Support common commands bdinfo and image format, also modify common generic flow for RISC-V. Signed-off-by: NRick Chen <rick@andestech.com> Signed-off-by: NRick Chen <rickchen36@gmail.com> Signed-off-by: NGreentime Hu <green.hu@gmail.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
- 08 9月, 2017 2 次提交
-
-
由 Chris Packham 提交于
This migrates ASIX, ASIX88179, MCS7830, RTL8152 and SMSC95XX to Kconfig. Update defconfigs. Signed-off-by: NChris Packham <judge.packham@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Chris Packham 提交于
CONFIG_USB_HOST_ETHER is the framework that the drivers are dependent on USB_HOST_ETHER. Use this as a menu and move the existing LAN75XX and LAN78XX options under new menu. Finally update the defconfigs that need CONFIG_USB_HOST_ETHER. Signed-off-by: NChris Packham <judge.packham@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
- 24 8月, 2017 1 次提交
-
-
由 Bin Meng 提交于
Let's imply the 'pci' command to access the de facto interconnect bus in an x86 system. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NStefan Roese <sr@denx.de>
-
- 12 8月, 2017 2 次提交
-
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_CMD_ZBOOT Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_CMD_SF_TEST Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
-
- 01 8月, 2017 8 次提交
-
-
由 Bin Meng 提交于
After MMC is converted to DM, convert to use DM SCSI as well for all x86 boards and imply BLK for both MMC and SCSI drivers. CONFIG_SCSI_DEV_LIST is no longer used. Clean them up. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Convert the pci_mmc driver over to driver model and migrate all x86 boards that use it. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com> Tested-by: NBin Meng <bmeng.cn@gmail.com> [bmeng: remove DM_MMC from edison_defconfig] Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Bin Meng 提交于
Like other peripheral drivers, move USB related drivers to platform Kconfig as well. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NAndy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
Now that all x86 boards have been converted to use DM, we can imply these uclass drivers (DM_ETH, DM_RTC, DM_USB, DM_VIDEO) from the top level. Previously DM_GPIO, DM_KEYBOARD, DM_SERIAL, DM_SPI, DM_SPI_FLASH are selected. Change to use 'imply' to allow them to be removed. Note with this change, chromebook_link64 build fails: common/built-in.o:(.data.env_htab+0xc): undefined reference to 'env_flags_validate' lib/built-in.o: In function `hsearch_r': lib/hashtable.c:380: undefined reference to 'env_callback_init' lib/hashtable.c:382: undefined reference to 'env_flags_init' make[1]: *** [spl/u-boot-spl] Error 1 CONFIG_SPL_ENV_SUPPORT is required for chromebook_link64 to build again. This is just a workaround as it is not needed at all. See commit bda40d56 "x86: qemu: Add a config for 64-bit U-Boot" for the same issue seen on QEMU 64-bit target. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NAndy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
This is a must have for all x86 boards. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NAndy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
PCI is the de facto interconnect bus in an x86 system. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NAndy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
x86 is using the built-in libgcc implementation and this cannot be turned off. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NAndy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
Without a timer, U-Boot just doesn't boot. This is not something we can turn off. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NAndy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
- 30 7月, 2017 1 次提交
-
-
由 Andy Shevchenko 提交于
Kbuild complains if USB is not selected before any of host driver. warning: (X86) selects USB_EHCI_HCD which has unmet direct dependencies (USB) warning: (X86) selects USB_EHCI_HCD which has unmet direct dependencies (USB) Select it for X86. Fixes: 64d6ac5b ("Kconfig: USB: Migrate CONFIG_USB_EHCI_HCD users to Kconfig") Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> [bmeng: Update all x86 boards' defconfig files to remove CONFIG_USB] Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
-
- 25 7月, 2017 1 次提交
-
-
由 Tom Rini 提交于
The above CONFIG options are in Kconfig, and now have correct depends and inter-dependencies. Migrate these to configs/ from include/configs/. In the case of CMD_UBIFS also change it to be a default y if CMD_UBI. Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 12 7月, 2017 2 次提交
-
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_CMD_SATA Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_SCSI Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
- 07 7月, 2017 1 次提交
-
-
由 Andy Shevchenko 提交于
AVR32 is gone. It's already more than two years for no support in Buildroot, even longer there is no support in GCC (last version is heavily patched 4.2.4). Linux kernel v4.12 got rid of it (and v4.11 didn't build successfully). There is no good point to keep this support in U-Boot either. Reviewed-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NTom Rini <trini@konsulko.com> Reviewed-by: NHeiko Schocher <hs@denx.de> Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
-
- 27 6月, 2017 1 次提交
-
-
由 Bin Meng 提交于
This reverts commit ddb3ac3c. With MMC converted to driver model, SCSI driver is broken due to zero address access at (ops->read) in block_dread() function. The fix (SCSI driver converted to DM) is ready in u-boot-dm branch, but it is too late for this relese to get that in. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
- 04 6月, 2017 1 次提交
-
-
由 Tom Rini 提交于
Now that these symbols are in Kconfig, migrate all users. Use imply on a number of platforms that default to having this enabled. As part of this we must migrate some straglers for CMD_FAT and DOS_PARTITION. Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 01 6月, 2017 1 次提交
-
-
由 Daniel Thompson 提交于
Currently these (board agnostic) commands cannot be selected using menuconfig and friends. Fix this the obvious way. As part of this, don't muddle the meaning of CONFIG_HASH_VERIFY to mean both 'hash -v' and "we have a hashing command" as this makes the Kconfig logic odd. Signed-off-by: NDaniel Thompson <daniel.thompson@linaro.org> [trini: Re-apply, add imply for a few cases, run moveconfig.py, also migrate CRC32_VERIFY] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 23 5月, 2017 7 次提交
-
-
由 Simon Glass 提交于
Enable this option by default on sandbox to increase build coverage. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_CMD_LZMADEC Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_LZMA Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_CMD_IRQ Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_CMD_IOTRACE Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_CMD_IO Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_CMD_HASH Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NTom Rini <trini@konsulko.com> [trini: Rework slightly, enable on some boards again] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 22 5月, 2017 3 次提交
-
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_CMD_GETTIME Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_CMD_FPGA_LOADBP CONFIG_CMD_FPGA_LOADFS CONFIG_CMD_FPGA_LOADMK CONFIG_CMD_FPGA_LOADP Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 rick 提交于
Support AG101P serial device tree flow. Signed-off-by: Nrick <rick@andestech.com>
-
- 17 5月, 2017 1 次提交
-
-
由 Simon Glass 提交于
Convert the pci_mmc driver over to driver model and migrate all x86 boards that use it. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com> Tested-by: NBin Meng <bmeng.cn@gmail.com>
-
- 16 5月, 2017 1 次提交
-
-
由 Tom Rini 提交于
Migrate the rest of the users of CONFIG_USB_EHCI_HCD over to Kconfig. For a few SoCs, imply or default y this if USB is enabled. In some cases we had not already migrated to CONFIG_USB so do that as well. Cc: Marek Vasut <marex@denx.de> Signed-off-by: NTom Rini <trini@konsulko.com> Reviewed-by: NMarek Vasut <marex@denx.de>
-
- 06 4月, 2017 3 次提交
-
-
由 Tom Rini 提交于
The OpenRISC architecture is currently unmaintained, remove. Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Signed-off-by: NTom Rini <trini@konsulko.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Tom Rini 提交于
The SPARC architecture is currently unmaintained, remove. Cc: Francois Retief <fgretief@spaceteq.co.za> Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
The architecture is currently unmaintained, remove. Cc: Benjamin Matthews <mben12@gmail.com> Cc: Chong Huang <chuang@ucrobotics.com> Cc: Dimitar Penev <dpn@switchfin.org> Cc: Haitao Zhang <hzhang@ucrobotics.com> Cc: I-SYST Micromodule <support@i-syst.com> Cc: M.Hasewinkel (MHA) <info@ssv-embedded.de> Cc: Marek Vasut <marex@denx.de> Cc: Martin Strubel <strubel@section5.ch> Cc: Peter Meerwald <devel@bct-electronic.com> Cc: Sonic Zhang <sonic.adi@gmail.com> Cc: Valentin Yakovenkov <yakovenkov@niistt.ru> Cc: Wojtek Skulski <info@skutek.com> Cc: Wojtek Skulski <skulski@pas.rochester.edu> Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 29 3月, 2017 1 次提交
-
-
由 Vlad Zakharov 提交于
This commit replaces legacy timer code with usage of arc timer driver. It removes arch/arc/lib/time.c file and selects CONFIG_CLK, CONFIG_TIMER and CONFIG_ARC_TIMER options for all ARC boards by default. Therefore we remove CONFIG_CLK option from less common axs101 and axs103 defconfigs. Also it removes legacy CONFIG_SYS_TIMER_RATE config symbol from axs10x.h, tb100.h and nsim.h configs files as it is no longer required. Signed-off-by: NVlad Zakharov <vzakhar@synopsys.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
- 24 3月, 2017 1 次提交
-
-
由 Vlad Zakharov 提交于
This commit replaces legacy timer code with usage of arc timer driver. It removes arch/arc/lib/time.c file and selects CONFIG_CLK, CONFIG_TIMER and CONFIG_ARC_TIMER options for all ARC boards by default. Therefore we remove CONFIG_CLK option from less common axs101 and axs103 defconfigs. Also it removes legacy CONFIG_SYS_TIMER_RATE config symbol from axs10x.h, tb100.h and nsim.h configs files as it is no longer required. Signed-off-by: NVlad Zakharov <vzakhar@synopsys.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-